During the past years, the VLTI-instrument GRAVITY has made spectacular discoveries with phase-referenced interferometric imaging with milliarcsecond resolution and ten microarcsecond astrometry. Here, we report on the upgrade of the GRAVITY science spectrometer with two new grisms in October 2019, increasing the instrument throughput by a factor > 2. This improvement was made possible by using a high refractive index Germanium substrate, which reduces the grism and groove angles, and by successfully applying an anti-reflection coating to the ruled surface to overcome Fresnel losses. We present the design, manufacturing, and laboratory testing of the new grisms, as well as the results from the re-commissioning on sky.
Combining adaptive optics and interferometric observations results in a considerable contrast gain compared to single-telescope, extreme AO systems. Taking advantage of this, the ExoGRAVITY project is a survey of known young giant exoplanets located in the range of 0.1” to 2” from their stars. The observations provide astrometric data of unprecedented accuracy, being crucial for refining the orbital parameters of planets and illuminating their dynamical histories. Furthermore, GRAVITY will measure non-Keplerian perturbations due to planet-planet interactions in multi-planet systems and measure dynamical masses. Over time, repetitive observations of the exoplanets at medium resolution (R = 500) will provide a catalogue of K-band spectra of unprecedented quality, for a number of exoplanets. The K-band has the unique properties that it contains many molecular signatures (CO, H2O, CH4, CO2). This allows constraining precisely surface gravity, metallicity, and temperature, if used in conjunction with self-consistent models like Exo-REM. Further, we will use the parameter-retrieval algorithm petitRADTRANS to constrain the C/O ratio of the planets. Ultimately, we plan to produce the first C/O survey of exoplanets, kick-starting the difficult process of linking planetary formation with measured atomic abundances.
The GRAVITY instrument has revolutionized optical/IR interferometry: fringe-tracking and phase-referencing allow for 30 micro-arcsecond astrometry in a dual beam mode, and for spectro-differential astrometry better than 10 micro-arcseconds. The control of systematic effects is essential to fully exploit this technological advancement. Among those systematics are static phase aberrations, introduced along the instrument's optical path, which in particular affect the inferred separation of two unresolved objects within the same FOV. Here, we present how the aberrations can be measured, characterized by low-order Zernike polynomials and, most importantly, how their impact on the astrometry is corrected. The resulting astrometry corrections are verified with calibration observations of a binary before we discuss how they affect GRAVITY's measurement of the galactic center distance.
We present the successful demonstration of world's first large-separation ~30" off-axis fringe tracking with four telescopes in October 2019. With this technique we increase the sky-coverage for optical interferometry by orders of magnitude compared to current technology. Following the early work at the Palomar Testbed Interferometer, the first demonstration of off-axis fringe tracking at the Keck Interferometer and with PRIMA at the ESO Very Large Telescope Interferometer, and the breakthrough with the GRAVITY Galactic Center observations, we enhanced the VLTI infrastructure for GRAVITY to take advantage of the PRIMA Star separators and Differential Delay Lines for off-axis fringe tracking. In our presentation we give an introduction to the subject, present the enhancements of the VLTI, and present our results from the first on-sky operation in October 2019, with observations of the Orion Trapezium Cluster, a field brown dwarf, and a high redshift quasar.
Instrumental polarization can have large effects on measurements with the VLTI, as it can alter measured polarization and introduce uncertainties. To understand these effects we measured and simulated the instrumental polarization of the VLTI and of GRAVITY. We are able to provide a calibration model for GRAVITY observations and quantify systematic uncertainties due to instrumental polarization. This work has shown to be crucial to measure the polarization of the galactic center black hole Sgr A* where we detect a swing in the polarization angle during flare events. While the analysis was done for GRAVITY, it also gives an important basis for the design of future near-infrared instruments at the VLTI.
Since its first light at the Very Large Telescope Interferometer (VLTI), GRAVITY has reached new regimes in optical interferometry, in terms of accuracy as well as sensitivity.1 GRAVITY is routinely doing phase referenced interferometry of objects fainter than K > 17 mag, which makes for example the galactic center black hole Sagittarius A*2 detectable 90 % of the times. However from SNR calculations we are confident that even a sensitivity limit of K ~ 19 mag is possible. We therefore try to push the limits of GRAVITY by improving the observations as well as the calibration and the data reduction. This has further improved the sensitivity limit to K > 18 mag in the beginning of this year. Here we present some work we are currently doing in order to reach the best possible sensitivity.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.