NASA’s James Webb Space Telescope (JWST) is a 6.6m diameter, segmented, deployable telescope for cryogenic IR space astronomy. The JWST Observatory architecture includes the Optical Telescope Element (OTE) and the Integrated Science Instrument Module (ISIM) element which contains four science instruments (SI), including a guider. The SIs and guider are mounted to a composite metering structure with outer envelope approximate measurements of 2.2x2.2x1.7m. These SI units are integrated to the ISIM structure and optically tested at NASA Goddard Space Flight Center as an instrument suite using an Optical telescope element SIMulator (OSIM). OSIM is a high-fidelity, cryogenic JWST simulator that features a ~1.5m diameter powered mirror. The SIs are aligned to the flight structure’s coordinate system under ambient, clean room conditions using opto-mechanical metrology and customized interfaces. OSIM is aligned to the ISIM mechanical coordinate system at the cryogenic operating temperature via internal mechanisms and feedback from alignment sensors and metrology in six degrees of freedom. SI performance, including focus, pupil shear, pupil roll, boresight, wavefront error, and image quality, is evaluated at the operating temperature using OSIM. This work reports on the as-run ambient assembly and ambient alignment steps for the flight ISIM, including SI interface fixtures and customization and kinematic mount adjustment. The ISIM alignment plan consists of multiple steps to meet the “absolute” alignment requirements of the SIs and OSIM to the flight coordinate system. In this paper, we focus on key aspects of absolute, optical-mechanical alignment. We discuss various metrology and alignment techniques. In addition, we summarize our approach for dealing with and the results of ground-test factors, such as gravity.
KEYWORDS: James Webb Space Telescope, Cryogenics, Space telescopes, Optical testing, Optical components, Sensors, Signal attenuation, Lamps, Tungsten, Calibration
NASA’s James Webb Space Telescope (JWST) is a 6.5 m diameter, segmented, deployable telescope for cryogenic infrared space astronomy (~40 K). The JWST Observatory architecture includes the Optical Telescope Element (OTE) and the Integrated Science Instrument Module (ISIM) element that contains four science instruments (SIs), including a guider. The SI and guider units are integrated to the ISIM structure and optically tested at NASA Goddard Space Flight Center as an instrument suite using a telescope simulator (Optical Telescope Element SIMulator; OSIM). OSIM is a high-fidelity, cryogenic JWST telescope simulator that features a ~1.5m diameter powered mirror. The SIs are aligned to the flight structure’s coordinate system under ambient, clean room conditions using optomechanical metrology and customized interfaces. OSIM is aligned to the ISIM mechanical coordinate system at the cryogenic operating temperature via internal mechanisms and feedback from alignment sensors and metrology in six degrees of freedom. SI performance, including focus, pupil shear, pupil roll, boresight, wavefront error, and image quality, is evaluated at the operating temperature using OSIM. The comprehensive optical test plans include drafting OSIM source configurations for thousands of exposures ahead of the start of a cryogenic test campaign. We describe how we predicted the performance of OSIM light sources illuminating the ISIM detectors to aide in drafting these optical tests before a test campaign began. We also discuss the actual challenges and successes of those exposure predictions encountered during a test campaign to fulfill the demands of the ISIM optical performance verification.
KEYWORDS: James Webb Space Telescope, Optical components, Space telescopes, Optical testing, Sensors, Calibration, Data modeling, Human-machine interfaces, Error analysis, Analytical research
NASA’s James Webb Space Telescope (JWST) is a 6.5m diameter, segmented, deployable telescope for cryogenic IR space astronomy. The JWST Observatory includes the Optical Telescope Element (OTE) and the Integrated Science Instrument Module (ISIM), that contains four science instruments (SI) and the Fine Guidance Sensor (FGS). The SIs are mounted to a composite metering structure. The SIs and FGS were integrated to the ISIM structure and optically tested at NASA's Goddard Space Flight Center using the Optical Telescope Element SIMulator (OSIM). OSIM is a full-field, cryogenic JWST telescope simulator. SI performance, including alignment and wavefront error, was evaluated using OSIM. We describe test and analysis methods for optical performance verification of the ISIM Element, with an emphasis on the processes used to plan and execute the test. The complexity of ISIM and OSIM drove us to develop a software tool for test planning that allows for configuration control of observations, implementation of associated scripts, and management of hardware and software limits and constraints, as well as tools for rapid data evaluation, and flexible re-planning in response to the unexpected. As examples of our test and analysis approach, we discuss how factors such as the ground test thermal environment are compensated in alignment. We describe how these innovative methods for test planning and execution and post-test analysis were instrumental in the verification program for the ISIM element, with enough information to allow the reader to consider these innovations and lessons learned in this successful effort in their future testing for other programs.
In this manuscript, we further develop our concepts for the free-flying occulter space-based mission, the Umbral Missions Blocking Radiating Astronomical Sources (UMBRAS). Our optical simulations clearly show that an UMBRAS-like mission designed around a 4-m telescope and 10-m occulter could directly image terrestrial planets. Such a mission utilizing existing technology could be built and flown by the end of the decade. Moreover, many of the other proposed concepts for Terrestrial Planet Finder (TPF) could significantly benefit by using an external occulter.
We present simultations for an optical design comprising a square aperture telescope plus square external occulter. We show that the entire diffraction pattern, which is propagated from occulter to telescope and through telescope to focal plane, may be characterized by two parameters, the Fresnel number and the ratio of the telescope diameter to the occulter width. Combining the effects of a square occulter with apodization provides a much more rapid roll-off in the PSF intensity between the diffraction spikes than may be achieved with an unapodized telecope aperture and occulter. We parameterize our results with respect to wavefront quality and compare them against other competing methods for exo-planet imaging. The combination of external occulter and apodization yields the required contrast in the region of the PSF essential for exo-planet detection.
An occulter external to the telescope (i.e., in a separate spacecraft, as opposed to a classical coronagraph with internal occulter) reduces light scatter within the telescope by approximately 2 orders of magnitude. This is due to less light actually entering the telescope. Reduced scattered light significantly relaxes the constraints on the mirror surface roughness, especially in the mid-spatial frequencies critical for planet detection. This study, plus our previous investigations of engineering as well as spacecraft
rendezvous and formation flying clearly indicates that the UMBRAS concept is very competitive with, or superior to, other proposed concepts for TPF missions.
We describe a 1-meter space telescope plus free-flying occulter craft mission that would provide direct imaging and spectroscopic observations of Jovian and Uranus-sized planets about nearby stars not detectable by Doppler techniques. The Doppler technique is most sensitive for the detection of massive, close-in extrasolar planets while the use of a free-flying occulter would make it possible to image and study stellar systems with planets comparable to our own Solar System. Such a mission with a larger telescope has the potential to detect earth-like planets. Previous studies of free-flying occulters reported advantages in having the occulting spot outside the telescope compared to a classical coronagraph onboard a space telescope. Using an external occulter means light scatter within the telescope is reduced due to fewer internal obstructions and less light entering the telescope and the polishing tolerances of the primary mirror and the supporting optics can be less stringent, thereby providing higher contrast and fainter detection limits.
In this concept, the occulting spot is positioned over the star by translating the occulter craft, at distances of 1,000 to 15,000 kms from the telescope, on the sky instead of by moving the telescope. Any source within the telescope field-of-view can be occulted without moving the telescope. In this paper, we present our current concept for a 1-m space telescope matched to a free-flying occulter, the Umbral Missions Blocking Radiating Astronomical Sources (UMBRAS) space mission. An UMBRAS space mission consists of a Solar Powered Ion Driven Eclipsing Rover (SPIDER) occulter craft and a matched (apodized) telescope. The occulter spacecraft would be semi-autonomous, with its own propulsion systems, internal power
(solar cells), communications, and navigation capability. Spacecraft rendezvous and formation flying would be achieved with the aid of telescope imaging, RF or laser ranging, celestial navigation inputs, and formation control algorithms.
We present a novel coronagraphic imaging technique and design for space-based telescopes. The Umbral Mission
Blocking Radiating Astronomical Sources (UMBRAS) is a space mission design consisting of a free flying occulter, the
Solar Powered Ion Driven Eclipsing Rover (SPIDER), and possibly one or two metrology platforms. The UMBRAS
spacecraft operate in conjunction with a space-based telescope. The size of the occulting SPIDER is dictated by
the size of the telescope with which it will work. The goal of UMBRAS is to provide "paleolithic" (i.e., non-focal
plane) coronagraphic capability to enable direct imaging of extrasolar Jovian planets and other bright substellar
companions such as brown dwarfs.
We discuss two aspects of the operation of a free flying occulter: acquisition of targets and station keeping. Target
acquisition is modeled after the onboard schemes used by Hubble Space Telescope (HST) science instruments. For
UMBRAS, the onboard commanding sequences would include imaging the field using instruments on the telescope,
locating the target and the occulter in the field, and accurately positioning the occulter over the target. Station
keeping consists of actively maintaining the occulter position in the telescope line of sight to the target.
Velocity matching of the c)cculter with the space-based telescope is essential to mission performance. An appropriate
combination of solar electric and cold gas thrusters provide the ability to match velocities using position
information derived from communication and from ranging data between telescope, occulter and any metrology
stations.
The accuracy requirements for target acquisition and station keeping depend upon the science requirements,
the occultation geometry, and the sensitivity of the science to changes in occultation geometry during an exposure
sequence. Observing modes other than the ideal centered occultation of a target will be discussed.
In this paper we discuss operational considerations for the free-flying occulter. Operations consist of maneuvering the Solar-Powered Ion-Driven Eclipsing Rover (SPIDER) between targets, alignment with the space-based telescope line of sight to the target, and stationkeeping target-to-target maneuvers need to be optimized to conserve propellant. A reasonable balance needs to be determined between target observation rate and the number of targets that are observable during mission lifetime. Velocity matching of the SPIDER with the telescope is essential to mission performance. An appropriate combination of solar electric and cold-gas thrusters provides the ability to match velocities using positional information derived from comminution and ranging between telescope, occulter and any metrology stations. Desirable features of using an external coronagraphic vehicle include the ability to obtain coronagraphic data with any instrument on the telescope-- imaging, spectroscopic, or interferometric.
Alfred Schultz, Daniel Schroeder, Ian Jordan, Fred Bruhweiler, Mike DiSanti, Helen Hart, Forrest Hamilton, John Hershey, Mark Kochte, Cherie Miskey, Kwang-Ping Cheng, Melodi Rodrigue, Bruce Johnson, Sami Fadali
Direct imaging of terrestrial and Jupiter-size planets about other stars is a major goal of NASA's Origins Program and should be as well for the next generation of spaceborne telescopes. In this paper, we discuss a free-flying occulter to augment the design and imaging capability of space-based telescopes. The Umbral Mission Blocking Radiating Astronomical Sources (UMBRAS) space mission would consist of a Solar- Powered Ion-Driven Eclipsing Rover (SPIDER) and possibly one or two metrology platforms. The UMBRAS spacecraft would be semi-autonomous, with their own propulsion systems, internal power (solar cells), communications, and navigation capability. The spacecraft (the telescope, SPIDER, and any metrology platform) would define a reference frame for aligning the telescope and the SPIDER with the observed target. When stationed at distances of 1,000 to 15,000 km from a telescope, the occulter will enable an 8 m telescope to image very faint sources as close as 0.15' from the target stars. Three of the Doppler-detected planets about nearby stars are at this separation and could be directly imaged with this observing technique. It would be possible to image giant planets as close as 5 Au from parent stars at distances from the Sun as great as 30 pc. With this technique, terrestrial- size planets could be detected around nearby stars within the next decade. We briefly discuss the diffraction effects caused by the occulter and a preliminary proof-of-concept design for the UMBRAS spacecraft. Finally, we suggest types of observations other than planet finding that could be performed with UMBRAS.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.