This will count as one of your downloads.
You will have access to both the presentation and article (if available).
In this work, we propose integration of FLM with micro-injection moulding (μIM) as a novel route towards the cost-effective and flexible manufacturing of polymeric Lab-on-a-Chip (LOC) devices. In particular, we have fabricated and assembled a polymethylmethacrylate (PMMA) microfluidic optical stretcher by exploiting firstly FLM to manufacture a metallic mould prototype with reconfigurable inserts. Afterwards, such mould was employed for the production, through μIM, of the two PMMA thin plates composing the device. The microchannel with reservoirs and lodgings for the optical fibers delivering the laser radiation for cell trapping were reproduced on one plate, while the other included access holes to the channel. The device was assembled by direct fs-laser welding, ensuring sealing of the channel and avoiding thermal deformation and/or contamination.
The modifications produced by the focused laser beam into the bulk material have been firstly investigated depending on the laser process parameters aiming to produce continuous melting. Results have been evaluated based on heat accumulation models. Finally, fs-laser welding of PMMA samples have been successfully demonstrated and tested by leakage tests for application in direct laser assembly of microfluidic devices.
View contact details
No SPIE Account? Create one
