Optimization of ArF resist for 100-nm node: DOE and fine-tuning of basic platform

Keeho Kim; Gregory M. Wells; Won D. Kim; Yong-Jun Choi; Se-Jin Choi; Yang-Sook Kim; Deog-Bae Kim

doi:10.1117/12.436846

24 August 2001 Optimization of ArF resist for 100-nm node: DOE and fine-tuning of basic platform

Keeho Kim, Gregory M. Wells, Won D. Kim, Yong-Jun Choi, Se-Jin Choi, Yang-Sook Kim, Deog-Bae Kim

Proceedings Volume 4345, Advances in Resist Technology and Processing XVIII; (2001) https://doi.org/10.1117/12.436846
Event: 26th Annual International Symposium on Microlithography, 2001, Santa Clara, CA, United States

Abstract

ArF lithography is pushing its limit to beyond the 100-nm node due to delay of NGL technologies to meet the aggressive insertion schedules. However, lithography process for 100-nm node with binary mask and ArF resist is still not easy to achieve and will be one of the big challenges for lithography community. Although there have been significant improvements over the past year, ArF resists remain as the most critical aspect in ArF lithography development. Areas of concern for ArF resist include; higher level of environmental instability compared to KrF materials, different response depending on the tone of reticles, and different performance exhibited between microsteppers used for initial development and full field scanners to be used in manufacturing. We expect that these problems will be getting worse in sub 100-nm node. To achieve the most challenging performance goals, the resist to be used in manufacturing will require optimization of the chemical formulation of commercialized resists based on specific design requirements, process and environmental conditions. This paper will describe an extensive DOE (design of experiments) that was performed in order to find better resist formulation from commercialized resists for our specific FAB environment. PAG, resin and amine were main three components for this DOE. After choosing the best resist for 100-nm node, we have will evaluated actual lithographic performance capability such as DOF, exposure latitude, etc.

Citation Download Citation

Keeho Kim, Gregory M. Wells, Won D. Kim, Yong-Jun Choi, Se-Jin Choi, Yang-Sook Kim, and Deog-Bae Kim "Optimization of ArF resist for 100-nm node: DOE and fine-tuning of basic platform", Proc. SPIE 4345, Advances in Resist Technology and Processing XVIII, (24 August 2001); https://doi.org/10.1117/12.436846

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available