SEM overlay target design optimization by e-beam simulation

Il Hwan Kim; Cheolgyu Hyun; Sangho Jo; Muyoung Lee; Ikjun Jang; Jongsu Kim; Jinhong Park; Yigwon Kim; Chang Min Park; Kevin Houchens; Jenny Perry; Nahum Bomshtein; Liad Anokov; Noam Oved; Uri Smolyan; Michael Shifrin; Tal Itzkovich; Jeong Ho Yeo; You Jin Kim; Baek Jun Kim

doi:10.1117/12.3010511

16 April 2024 SEM overlay target design optimization by e-beam simulation

Il Hwan Kim, Cheolgyu Hyun, Sangho Jo, Muyoung Lee, Ikjun Jang, Jongsu Kim, Jinhong Park, Yigwon Kim, Chang Min Park, Kevin Houchens, Jenny Perry, Nahum Bomshtein, Liad Anokov, Noam Oved, Uri Smolyan, Michael Shifrin, Tal Itzkovich, Jeong Ho Yeo, You Jin Kim, Baek Jun Kim

Author Affiliations +

Proceedings Volume 12955, Metrology, Inspection, and Process Control XXXVIII; 129551I (2024) https://doi.org/10.1117/12.3010511
Event: SPIE Advanced Lithography + Patterning, 2024, San Jose, California, United States

Abstract

As CMOS node advanced, device patterns become smaller and denser, which as a result, decrease overlay budget. Each contributor to overlay error is significant and should be minimized, even at early stage of technology development. The performance of optical overlay metrology is challenged by the difference between optical target and device structure, which response differently to lithography optics (aberration response), hence reduce correlation to device overlay. E-Beam overlay can mitigate this gap as it can measure device-size structures. In this case, the challenge is to measure small, dense and buried patterns, which may have low visibility (contrast and edge resolution), but still provide acceptable total measurement uncertainty (TMU) to reduce error budget from the tight overlay specs. Finding optimal target where its design is similar or close to device and is measurable with robust performance, without designing and re-design targets in multiple tape-out cycles, can be done by simulating scanning electron microscopy (SEM) measurements of different device-like targets and find the optimal point where predicted performances are good and the design is as close to the device. In this paper we propose a method that evaluates measurement performances of different SEM overlay target designs using e-Beam simulation of back-scatter electrons (BSE) yield from buried layers. Targets with different design rules: pitch, critical dimensions (CD) and edge-to-edge distance are simulated at different measurement conditions and results are compared to measurement of actual targets on wafer. The comparison shows that measurement performance can be predicted by simulation, which can point out optimal target design and measurement conditions.

Conference Presentation

(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.

Citation Download Citation

Il Hwan Kim, Cheolgyu Hyun, Sangho Jo, Muyoung Lee, Ikjun Jang, Jongsu Kim, Jinhong Park, Yigwon Kim, Chang Min Park, Kevin Houchens, Jenny Perry, Nahum Bomshtein, Liad Anokov, Noam Oved, Uri Smolyan, Michael Shifrin, Tal Itzkovich, Jeong Ho Yeo, You Jin Kim, and Baek Jun Kim "SEM overlay target design optimization by e-beam simulation", Proc. SPIE 12955, Metrology, Inspection, and Process Control XXXVIII, 129551I (16 April 2024); https://doi.org/10.1117/12.3010511

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available