Presentation + Paper
26 May 2022 High NA EUV stochastic resist modeling considered with development parameters
R. Tsuzuki, X. Liu, K. Oyama
Author Affiliations +
Abstract
In 2021 IRDS logic roadmap, required minimum contact/via pitch is 28 nm in 2025, which cannot be obtained by single exposure at 0.33 NA system using chemical amplified resist (CAR). To make the target possible, 0.55 NA system is the only way for single exposure. The relationship of resolution, roughness, and sensitivity has been known to be trade-off in CAR, and we tried optimizing them at 0.55 NA lithography simulation. For the optimization, not only resist material parameters, but also resist development parameters were adjusted. In addition, we conducted numerical simulation for line and space (L/S) pattern of metal oxide resist (MOR), which is expected as one of the breakthroughs for making narrower patterns. We set up a MOR NTD model and calibrated it by experimental data. The calibrated model is applied to the evaluation of the patterning performance including dose to size (DtS), roughness, and resist profile. Simulation results regarding a new wet development method for MOR to break through the RLS trade-off are introduced.
Conference Presentation
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. Tsuzuki, X. Liu, and K. Oyama "High NA EUV stochastic resist modeling considered with development parameters", Proc. SPIE 12051, Optical and EUV Nanolithography XXXV, 120510F (26 May 2022); https://doi.org/10.1117/12.2613438
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Calibration

Extreme ultraviolet

Data modeling

Extreme ultraviolet lithography

Photoresist processing

Floods

Stochastic processes

Back to Top