Ultra-narrow linewidth laser plays a very important role in the high-precision optical frequency transfer via optical fibers. We have designed and realized a compact portable laser system for transportable communication band ultra-narrow linewidth laser. Based on the method of topology optimization design, a stable optical board is developed. Designed and developed a series of small optical grade devices without exercise rules, making the optical system more stable. The optical system we designed is suitable for transportable ultra-narrow linewidth laser.
Frequency modulation technology has been widely used in many fields to get rid of the limitation of the 1/f flicker noise. However, the residual amplitude modulation (RAM) seriously deteriorates the detection accuracy of frequency modulation technology. Especially, for fiber electro-optic modulator (f-EOM), the RAM cannot be minimized by the conventional technique commonly used for free-space EOM such as careful mechanical adjustment or using a wedged crystal EOM. This can limit the use of f-EOM in high-performance detection techniques. In an ultra-stable laser system, the existence of the RAM has become one of the important factors limiting the frequency stability. This paper develops a dual-loop active feedback servo system to minimize the RAM. The voltage and temperature dependence of the EOM are measured to design a suitable active RAM reduction controller. To verify its ability, the active RAM reduction system is placed in an ultra-stable laser system for testing. The RAM noise is suppressed to less than 1 ppm and the corresponding laser frequency stability is 1×10−16. The RAM-reduced frequency stabilization is lower than the thermal noise limit of the reference cavity, so the RAM will not be the main factor affecting the laser frequency stability in the ultra-stable laser system.
As the local oscillator of the space optical clock, the ultra-stable laser determines the short-to-medium-term frequency stability of the space optical clock. Considering the space station’s restrictions on load weight and volume, as well as the impact of vibration and shock during launch, a tunable external cavity diode laser with small size, stable structure and no elastic adjustment device was developed. Optimized the design of the structure of the optical path board, developed small optical components, and developed a double-sided optical path system based on this. Experimental tests show that the free-running line width of the laser is about 175 kHz, which can run stably and reliably for a long time. At the same time, considering the deformation of the optical path substrate in the space microgravity environment, the topology optimization design of the optical board was carried out. Through mechanical simulation analysis, the maximum deformation of the optical path substrate under the influence of gravity is 0.43 μm, which initially meets the requirements of space applications.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.