The measurement of radiation patterns of antennas in air is relatively straightforward. In contrast, the measurement of the underground pattern for ground-penetrating radar (GPR) antennas poses particular challenges. Since GPRs are equipped with transmitting and receiving paths, the combined pattern is the most useful. To measure this pattern, a probe (scatterer) can be used to reflect part of the received signal back to the receiving antenna. However, the processing on the receiving end must determine whether or not that signal comes from the probe (“desired”) or from the soil or other objects (“undesired.”) These two issues can be addressed by using a modulated scatterer, i.e., a scatterer that is modulated at a frequency much less than the carrier frequency. The modulation can be realized either electrically or optically. The advantage of the optical approach is that spurious reflections are greatly reduced since an optical fiber is used instead of current-carrying metallic cables. The electrical approach, however, allows for deeper modulation levels, which increases the level of “desired” signal at the receiver. Another issue is related to the bandwidth of the scatterer. Since GPRs are generally very broadband, it is of interest to measure their broadband radiation patterns. The scatterers in the present work are successfully made broadband by resistively loading them. The results and trade-offs resulting from this technique are shown. In summary, the modulated scatterer technique is verified to be useful for these purposes. Experiments are realized in air and underground and the corresponding radiation patterns of a set of GPR antennas are shown.
Experiments and simulations were performed in order to assess the suitability of electrically and optically modulated scattererers (OMS) as electromagnetic field probes for measuring the pattern of ground-penetrating radar (GPR) antennas. Of special importance for the probe are its comparative performance as well as its frequency response. The former is related to the depth of modulation that the modulating device is able to reach and can be optimized with a proper choice of active element. The latter was improved by making the probe more broadband. The present work will also show the steps that have been taken to achieve better frequency response from 2 GHz to 8 GHz by means of resistively loading the probe and discuss the trade-offs involved in doing so.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.