The non-destructive readout capability of the Skipper Charge Coupled Device (CCD) has been demonstrated to reduce the noise limitation of conventional silicon devices to levels that allow single-photon or single-electron counting. The noise reduction is achieved by taking multiple measurements of the charge in each pixel. These multiple measurements come at the cost of extra readout time, which has been a limitation for the broader adoption of this technology in particle physics, quantum imaging, and astronomy applications. This work presents recent results of a novel sensor architecture that uses multiple non-destructive floating-gate amplifiers in series to achieve sub-electron readout noise in a thick, fully-depleted silicon detector to overcome the readout time overhead of the Skipper-CCD. This sensor is called the Multiple-Amplifier Sensing Charge-Coupled Device (MAS-CCD) can perform multiple independent charge measurements with each amplifier, and the measurements from multiple amplifiers can be combined to further reduce the readout noise. We will show results obtained for sensors with 8 and 16 amplifiers per readout stage in new readout operations modes to optimize its readout speed. The noise reduction capability of the new techniques will be demonstrated in terms of its ability to reduce the noise by combining the information from the different amplifiers, and to resolve signals in the order of a single photon per pixel. The first readout operation explored here avoids the extra readout time needed in the MAS-CCD to read a line of the sensor associated with the extra extent of the serial register. The second technique explore the capability of the MAS-CCD device to perform a region of interest readout increasing the number of multiple samples per amplifier in a targeted region of the active area of the device.
Detectors with sub-electron noise open new possibilities for the spectroscopy of Earth-like exoplanets, probing the faintest signatures of dark energy and dark matter with high-redshift galaxies, and observing fast-evolving transients. Multi-amplifier sensing (MAS) charge-coupled devices (CCDs) offer the capability to achieve ultra-low readout noise floors together with a readout rate comparable to current CCDs employed in observatories. This is achieved by distributing a chain of Skipper floating-gate amplifiers along the serial register, allowing charge to be read repeatedly, non-destructively, and independently. We show recent progress in optimizing the MAS CCD for use in astronomy. These include reducing noise to sub-electron levels with faster read times than Skipper CCDs, optical characterization results, and a discussion of the range of astronomical science cases and facilities that would be enabled by MAS CCDs.
MegaMapper is a 6.5m Magellan-like telescope fitted with a wide-field-corrector (WFC) and atmospheric-dispersion-corrector (ADC) that delivers a 3° diameter corrected field-of-view. The telescope’s focal surface is populated by ∼25,000 robotic fiber-positioners feeding a cluster of 36 DESI-like medium resolution spectrographs. We present the facility concept for MegaMapper including: conceptual optical and opto-mechanical designs for the telescope and WFC/ADC that deliver ≲ 0.4” image quality over the full FOV for zenith distances ≤ 50°; the development of a new and modular robotic fiber-positioner focal plane design that can populate the focal surface at high densities (6.2 mm pitch or ∼1 per arcmin2); and concepts for hosting the MegaMapper spectrograph cluster under environmentally controlled conditions inside the telescope enclosure. Building on existing and proven designs and technologies, MegaMapper aims to minimize the project’s technical risk and cost while delivering a competitive next-generation massively multiplexed spectroscopic facility. MegaMapper will lead the study of inflation, dark energy, dark matter, and time-domain astronomy over the next decades by carrying out wide-field cosmological galaxy-redshift surveys, massive spectroscopic surveys of stars in the Milky Way halo and satellites, and by providing a spectroscopic follow-up counterpart to wide field imaging facilities like the Vera C. Rubin Observatory and the Nancy Grace Roman space telescope.
The Dark Energy Spectroscopic Instrument (DESI) on the Mayall 4-m telescope has begun an ambitious survey of spectroscopic measurements of 40 million galaxies and quasars over an area of 14,000 deg2 . DESI is a wide field, multi-object, fiber-fed spectrograph, operating in the wavelength range of 360 - 980 nm. In this paper we present an overview of the DESI instrument focusing on key components including the prime-focus corrector, the focal plane with 5,020 remotely controlled fiber positioners, the procedures to position the fibers on selected targets and the spectrograph system. We then discuss the performance of the instrument during the first year of the DESI survey.
The recently commissioned Dark Energy Spectroscopic Instrument (DESI) will measure the expansion history of the universe using the Baryon Acoustic Oscillation technique. The spectra of 35 million galaxies and quasars over 14000 sq deg will be measured during the life of the experiment. A new prime focus corrector for the KPNO Mayall telescope delivers light to 5000 fiber optic positioners. The fibers in turn feed ten broad-band spectrographs. We describe key aspects and lessons learned from the development, delivery and installation of the fiber system at the Mayall telescope.
The Dark Energy Spectroscopic Instrument (DESI) is an ongoing spectroscopic survey to measure the dark energy equation of state to unprecedented precision. We describe the DESI Sky Continuum Monitor System, which tracks the night sky brightness as part of a system that dynamically adjusts the spectroscopic exposure time to produce more uniform data quality and to maximize observing efficiency. The DESI dynamic exposure time calculator (ETC) will combine sky brightness measurements from the Sky Monitor with data from the guider system to calculate the exposure time to achieve uniform signal-to-noise ratio (SNR) in the spectra under various observing conditions. The DESI design includes 20 sky fibers, and these are split between two identical Sky Monitor units to provide redundancy. Each Sky Monitor unit uses an SBIG STXL-6303e CCD camera and supports an eight-position filter wheel. Both units have been completed and delivered to the Mayall Telescope at the Kitt Peak National Observatory. Commissioning results show that the Sky Monitor delivers the required performance necessary for the ETC.
The recently commissioned Dark Energy Spectroscopic Instrument (DESI) will measure the expansion history of the Universe using the Baryon Acoustic Oscillation technique. The spectra of 35 million galaxies and quasars over 14000 sqdeg will be measured during the life of the experiment. A new prime focus corrector for the KPNO Mayall telescope delivers light to 5000 fiber optic positioners. The fibers in turn feed ten broad-band spectrographs. A consortium of Aix-Marseille University (AMU) and CNRS laboratories (LAM, OHP and CPPM) together with LPNHE (CNRS, IN2P3, Sorbonne Université and Université de Paris) and the WINLIGHT Systems company based in Pertuis (France), were in charge of integrating and validating the performance requirements of the ten full spectrographs, equipped with their cryostats, shutters and other mechanisms. We present a summary of our activity which allowed an efficient validation of the systems in a short-time schedule. We detail the main results. We emphasize the benefits of our approach and also its limitations.
The Dark Energy Spectroscopic Instrument (DESI) is under construction to measure the expansion history of the Universe using the Baryon Acoustic Oscillation technique. The spectra of 35 million galaxies and quasars over 14000 deg² will be measured during the life of the experiment. A new prime focus corrector for the KPNO Mayall telescope will deliver light to 5000 fiber optic positioners. The fibers in turn feed ten broad-band spectrographs. A consortium of Aix-Marseille University (AMU) and CNRS laboratories (LAM, OHP and CPPM) together with LPNHE (CNRS, Universities Pierre et Marie Curie and Paris-Diderot) and the WINLIGHT Systems company based in Pertuis (France), are in charge of integrating and validating the performance requirements of the full spectrographs. This includes the cryostats, shutters and other mechanisms. The first spectrograph of the series of ten has been fully tested and the performance requirements verified for the following items: focus, image quality, straylight, stability, detector properties and throughput. We present the experimental setup, the test procedures and the results.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.