For the purpose of lightweight and long span, the structural solution using cable is proposed, especially for the bridges and roofs design. Herein, one of the key members is the anchor cable, which plays decisive role in the cable structure. But the prestressed anchor cable is vulnerable to corrosion and fatigue damage due to various environmental activities. Failure due to accumulative defects or broken wires is inevitable, which seriously effects on the status of the cable-structure system. Therefore, it is essential to propose an efficient method which can realize the real-time evaluation and monitoring of the health status of the prestressed anchor cable. In this paper, the acoustic emission (AE) technique was proposed to quantify the damage progress in the prestressed anchor cable. In order to verify the proposed AE-based method, three prestressed anchor cables with different prescribed defects were tested to failure under the fatigue tensile. Different depths of scratches were preset at different positions of the steel wires in the cables. Aiming to the bundle of the anchor cable, the conventional 1-D AE localization and zonal localization method were combined to localize the micro-crack and rupture of cable. The relationship between AE signal signature and damage was established. The acoustic emission signatures were identified and characterized: (i) friction between cables; (ii) plastic deformation of cable; (iii) rupture. With the localization of AE and typical AE signature, the failure progress can be described. The massive AE signals of plastic deformation can provide the precursor of the cable rupture. AE shows good potential for predicting the healthy status of the prestressed anchor cable.
With the development of prefabricated building (PB), the connection quality problems among the prefabricated components may cause negative effect on the safety of the entire PB, and severe defects in the connection may lead to catastrophic accidents. Herein, the half-grouted sleeve connection is one of the most commonly used connection in PB While, the grouting process has to be completed on site; so, internal defects are unavoidable. Currently, there are few effective and easy-used inspection methods which can be used in field and realize the real-time monitoring. Therefore, this study proposes to use the acoustic emission (AE) method to monitor the damage progress of sleeves with different defect rates under monotonic tensile tension. Different defect levels were artificially introduced in the sample. Two different failure modes were identified by AE, and the AE signatures are different. The proposed method provides a feasible nondestructive method for prediction of damage in half-grouted sleeve in the early stage.
Half grouted sleeve connection has been widely used in the rebars connection of prefabricated concrete (PC) structure. Mostly, the implementation of grouted should be finished on site. Meanwhile, the internal defects are inevitable due to the concrete nature. Currently, there is few methods available, which can effectively and rapidly evaluate the quality of the connection. Therefore, in this paper, we propose a combination of low-frequency linear ultrasound (LUT) and nonlinear ultrasound (NLUT) to quantitatively characterize defect. The internal artificial defects are concentrated defects, and the defect content is 10%, 20%, 30% and 40% respectively. Through transmission mode was adapted for both LUT and NLUT. The UT wave propagation was distorted by different defects, which was the results of LUT. For NLUT with higher resolution, the complex distribution and different level of defect together will introduce nonlinearity. The experimental results show that the grouted defects reduce the ultrasonic energy of LUT, and increase the nonlinearity from NLUT with the increase of the defect size and randomness. The defect has a significant impact on the ultrasonic features. Therefore, Low-frequency LUT and NLUT methods are potential to realize the visualization the defects of half grouted sleeve connection.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.