Dr. Hong Ky Nguyen Profile

Dr. Hong Ky Nguyen

at Thorlabs Quantum Electronics

SPIE Involvement:

Author

Publications (5)

Proceedings Article | 20 February 2017 Presentation + Paper

Long-term reliability study and failure analysis of quantum cascade lasers

Feng Xie, Hong-Ky Nguyen, Herve Leblanc, Larry Hughes, Jie Wang, Dean Miller, Kevin Lascola

Proceedings Volume 10123, 101231J (2017) https://doi.org/10.1117/12.2255069

KEYWORDS: Accelerated life testing, Oxides, Data modeling, Reliability, Quantum cascade lasers, Transmission electron microscopy, Heterojunctions, Failure analysis, Oxidation

Read Abstract +

Proceedings Article | 5 February 2008 Paper

304 mW green light emission by frequency doubling of a high-power 1060-nm DBR semiconductor laser diode

Hong Ky Nguyen, Martin Hu, Yabo Li, Kechang Song, Nick Visovsky, Sean Coleman, Chung-En Zah

Proceedings Volume 6890, 68900I (2008) https://doi.org/10.1117/12.770678

KEYWORDS: Indium gallium arsenide, Lithium niobate, Quantum wells, Second-harmonic generation, Waveguides, High power lasers, Laser applications, Semiconductor lasers, Diodes, Display technology

Read Abstract +

Proceedings Article | 28 February 2006 Paper

High-power distributed Bragg reflector lasers for green-light generation

Martin Hu, Hong Ky Nguyen, Kechang Song, Yabo Li, Nick Visovsky, Xingsheng Liu, Nobuhiko Nishiyama, Sean Coleman, Lawrence Hughes, Jacques Gollier, William Miller, Raj Bhat, Chung-En Zah

Proceedings Volume 6116, 61160M (2006) https://doi.org/10.1117/12.647840

KEYWORDS: Semiconductors, Second-harmonic generation, Optical lithography, Modulation, Waveguides, High power lasers, Semiconductor lasers, Thermal effects, Distributed Bragg reflectors, Wavelength tuning

Read Abstract +

Proceedings Article | 22 February 2006 Paper

1.3-1.5 µm quantum dot lasers on foreign substrates: growth using defect reduction technique, high-power CW operation, and degradation resistance

N. Ledentsov, A. Kovsh, V. Shchukin, S. Mikhrin, I. Krestnikov, A. Kozhukhov, L. Karachinsky, M. Maximov, I. Novikov, Yu. Shernyakov, I. Soshnikov, A. Zhukov, Yu. Musikhin, V. Ustinov, N. Zakharov, P. Werner, T. Kettler, K. Posilovic, D. Bimberg, M. Hu, H. Nguyen, K. Song, Chung-en Zah

Proceedings Volume 6133, 61330S (2006) https://doi.org/10.1117/12.641483

KEYWORDS: Indium gallium arsenide, Quantum wells, Continuous wave operation, Indium arsenide, High power lasers, Gallium arsenide, Quantum dots, Semiconductor lasers, Laser stabilization

Read Abstract +

We have performed a systematic study of structural and optical properties of Quantum dot (QDs) lasers based on InAs/InGaAs quantum dots grown on GaAs substrates emitting in the 1.3 - 1.5 μm range. 1.3 μm range QD lasers are grown using GaAs as matrix material. It is shown that the lasers, grown with large number of QD stacks are metamorphic, with plastic relaxation occurring through the formation of misfit dislocations. Thus, 1.3 μm QD lasers with large number of stacks grown without strain compensation are metamorphic. Another type of defects is related to local dislocated clusters, which are the most dangerous. When proper optimization of the growth conditions is carried out, including a selective thermal etching off of statistically formed dislocated clusters through the defect-reduction technique (DRT), no significant impact of misfit dislocations on the degradation robustness is observed. In uncoated devices a high cw single mode power of ~700 mW is realized limited by thermal roll-over, which is not affected by 500 h ageing at room temperature. At elevated temperatures the main degradation mechanism revealed is catastrophic optical mirror damage (COMD). When the facet are passivated, the devices show the extrapolated operation lifetime in excess of 10⁶ h at 40°C at ~100 mW cw single mode output power. Longer wavelength (1.4 - 1.5 μm) devices are grown on metamorphic (In,Ga,Al)As layers deposited on GaAs substrates. In this case, the plastic relaxation occurs through formation of both misfit and threading dislocations. The latter kill the device performance. Using DRT in this case enables blocking of threading dislocation with growth of QDs in defect-free upper layers. DRT is realized by selective capping of the defect-free areas and high-temperature etching of nano-holes at the non-capped regions near the dislocation. The procedure results in etching of holes and is followed by fast lateral overgrowth with merger of the growth fronts. If the defect does not propagate into the upper layer when the hole is capped, the upper layers become defect-free. Lasers based on this approach exhibited emission wavelength in the 1.4 -1.5 μm range with a differential quantum efficiency of about ~50%. The narrow-stripe lasers operate in a single transverse mode and withstand continuous current density above 20 kA cm^-2 without degradation. A maximum continuous-wave output power of 220 mW limited by thermal roll-over is obtained. No beam filamentation was observed up to the highest pumping levels. Narrow stripe devices with as-cleaved facets are tested for 60°C (800 h) and 70°C (200 h) on-chip temperature. No noticeable degradation has been observed at 50 mW cw single mode output power. This shows the possibility of degradation-robust devices on foreign substrates. The technology opens a way for integration of various III-V materials and may target degradation-free lasers on silicon for further convergence of computing and communications.

Proceedings Article | 12 May 2004 Paper

Semiconductor optical amplifier for amplification and switching applications

Martin Hu, Catherine Caneau, Herve LeBlanc, Victor Liu, Hong Nguyen, Nobuhiko Nishiyama, Sergio Tsuda, Chung-En Zah

Proceedings Volume 5280, (2004) https://doi.org/10.1117/12.529503

KEYWORDS: Fiber amplifiers, Optical design, Switches, Optical amplifiers, Semiconductor optical amplifiers, Switching, Modulation, Polarization, Vertical cavity surface emitting lasers, Fiber couplers

Read Abstract +

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years