Measuring the detuning angle distribution within the full aperture of a large-aperture potassium dihydrogen phosphate (KDP) crystal is of great engineering importance for improving its frequency conversion efficiency. To improve the measurement speed of the crystal detuning angle, we propose a measurement method based on a flattened Gaussian beam with a large divergence angle. Theoretical simulation shows that the detuning angle of the KDP crystal is linearly related to the vertical position of the maximum light intensity of the second-harmonic laser when using this method. Experimental results confirm our theoretical analysis and show a relative measurement error of 1.32%, which meet the requirements of engineering applications. This measurement method saves 96% of the measurement time of the detuning angle of a single point within the aperture of the KDP crystal, enabling us to measure more points in a limited time, thus improving the measurement accuracy of the detuning angles over the full aperture of the KDP crystals.
A frequency converter is usually used in high-power laser facilities to triple the frequency of the incident laser. It consists of a KDP crystal and a KD*P crystal in series. The measurement of the detuning angles of the frequency converter is essential for improving the frequency conversion efficiency. In this paper, we propose a measurement method that uses a diverging beam to illuminate the frequency converter and get the detuning angles by analyzing the light intensity distribution of the third harmonic laser. The simulated results show that there is a strict linear relationship between the characteristic parameters and the detuning angles of frequency converter, verifying the feasibility of this method. Compared with existing measurement methods, its optical path is simple, and the single measurement time can be shortened to a few minutes from a few hours.
Polarization smoothing is a means to increase the uniformity of the focal spot by using polarization characteristics of light. It can theoretically reduce the contrast of focal spot to 0.707 times, and because of its real-time modulation characteristics, it can significantly suppress backscattering and improve the beam-target coupling performance of high-power laser facilities. However, in the traditional polarization smoothing scheme, the crystal used for polarization smoothing (largeaperture KDP crystal) will produce transverse stimulated Raman scattering in the high-power ultraviolet band, which will cause crystal damage. To prepare for the exploration of new single beamlet polarization smoothing schemes, we conduct a simulation study on the scheme of modulating the full Poincaré beam with a single transmission element. The results show that a single waveplate with a fast axis that rotates with polar angle and a phase retardation that increases with radius can modulate a full Poincaré beam, and we analyze the properties of this full Poincaré beam. Then combined with the engineering parameters, we analyzed the polarization smoothing performance of the full Poincaré beam with square aperture laser input. The performance was quantified by several target focal spot intensity evaluation indexes, and the results show that the use of the full Poincaré beam for polarization smoothing can reduce the contrast of the focal spot effectively, and the reduction range is close to the theoretical maximum value. And there are advantages in suppressing high energy density hot spots and optimizing the spatial frequency of the focal spot.
Large aperture frequency converters are important components of the high-power laser system. It is often composed of a cascaded KDP (Potassium Dihydrogen Phosphate) crystal and dKDP (potassium deuterium phosphate) crystal system. The effect of the stress distribution of KDP crystal on the second harmonic generation (SHG) efficiency has been studied. It is found that the phase mismatch has a linear relationship with unidirectional stress. The result of the case study shows that the stress-induced phase mismatch in the SHG process is needed to be paid more attention to in engineering.
Aiming at the requirement of illumination uniformity and backscattering suppression in laser-driven inertial confinement fusion (ICF) facilities, we propose a polarization smoothing (PS) scheme based on stress-engineered optical element that can modulate linearly polarized light into a full Poincaré beam. The unique law of modulation of the polarization state by glass window under symmetrical loads is revealed by numerical simulations, the results indicate that the glass window exhibits a fast axis orientation that rotates with the polar angle and a phase retardance that increases with the radius under more than two symmetrical pressure loads. Further optical calculations show that when the pressure of the loads and the thickness of the glass are sufficient, the window can modulate the linearly polarized light into a full Poincarébeam.
In the amplifier of the large-aperture laser facility, the laser slab will have a depolarization effect in part areas due to the mounting stress and thermal stress. The depolarization effect will degrade the polarization state of the laser so that it cannot meet the design requirements, thereby affecting the efficiency of the whole facility. At the same time, depolarization will also cause low isolation in the facility and cause unpredictable damage to the optics. Aiming at the problem of depolarization, this article proposes a method to adjust the stress distribution of the laser slab by mounting load, and then adjust the polarization state of the slab, so that the stress distribution of the glass is uniform, and the position of the glass depolarization is controlled as far from the four corners as possible and minimize the influence of depolarization effect on the laser.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.