The SRT inclinometer for monitoring the rail and the thermal gradient effects on the alidade structure

Tonino Pisanu; Franco Buffa; Sergio Poppi; Pasqualino Marongiu; Giampaolo Serra; Gian Paolo Vargiu; Raimondo Concu

doi:10.1117/12.2055556

22 July 2014 The SRT inclinometer for monitoring the rail and the thermal gradient effects on the alidade structure

Tonino Pisanu, Franco Buffa, Sergio Poppi, Pasqualino Marongiu, Giampaolo Serra, Gian Paolo Vargiu, Raimondo Concu

Proceedings Volume 9145, Ground-based and Airborne Telescopes V; 91454R (2014) https://doi.org/10.1117/12.2055556
Event: SPIE Astronomical Telescopes + Instrumentation, 2014, Montréal, Quebec, Canada

Abstract

Here we present the hardware and software of the inclinometer chosen to be installed on the SRT alidade. This is a commercial device which basically uses two pendulum-like sensors to measure two angles from which the antenna pointing errors can be easily inferred. Such an inclinometer was installed on the plane of the SRT alidade close to the antenna elevation axis to measure the azimuth and elevation axis tilts due to the not-perfect flatness of the rail and to the temperature gradient effects on the alidade steel beams. Last summer some tests were carried out during night time, allowing first to check the inclinometer in a measurement set-up aboard on SRT, and then, to monitor the axis tilt due mainly to the rail roughness. Several measurements were recorded by the inclinometer, while the antenna was moving at constant speed in the azimuth direction for a 360-degrees rotation. The results showed a good agreement with those we got during the laboratory tests, and the rail turned out to be plan within the expected accuracy, which means a resulting pointing error of about ±2 arc-sec. Finally inclinometer measurements and astronomical observations have been performed all at once. The inclinometer measurements and the antenna pointing offsets due mainly to thermal effects have been recorded, while SRT was observing at 23 GHz toward a circumpolar calibrator source for many hours after the sunrise. A good agreement between the two set of measurement has been found as will be shown here following.

Citation Download Citation

Tonino Pisanu, Franco Buffa, Sergio Poppi, Pasqualino Marongiu, Giampaolo Serra, Gian Paolo Vargiu, and Raimondo Concu "The SRT inclinometer for monitoring the rail and the thermal gradient effects on the alidade structure", Proc. SPIE 9145, Ground-based and Airborne Telescopes V, 91454R (22 July 2014); https://doi.org/10.1117/12.2055556

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available