The solution to enhance i-line stepper applications by improving mix and match process overlay accuracy

Yuhei Sumiyoshi; Ryo Sasaki; Yasuo Hasegawa; Kentaro Ushiku; Hirotaka Sano; Atsushi Shigenobu; Bunsuke Takeshita; Seiya Miura

doi:10.1117/12.2046769

31 March 2014 The solution to enhance i-line stepper applications by improving mix and match process overlay accuracy

Yuhei Sumiyoshi, Ryo Sasaki, Yasuo Hasegawa, Kentaro Ushiku, Hirotaka Sano, Atsushi Shigenobu, Bunsuke Takeshita, Seiya Miura

Author Affiliations +

Proceedings Volume 9052, Optical Microlithography XXVII; 90520H (2014) https://doi.org/10.1117/12.2046769
Event: SPIE Advanced Lithography, 2014, San Jose, California, United States

Abstract

In recent years, the demand for high sensitivity image sensors has become prominent, in correlation with the reduction of pixel size and higher pixel counts. Sensitivity is especially important for mobile applications and as a result, back side illumination (BSI) structure image sensors are emerging. The spread of BSI image sensors causes new technological challenges in the lithographic process. One of the challenges is related to the wafer distortion created during the bonding and thinning of the wafer. The challenge is to reduce the impact of the wafer distortion on the overlay accuracy, and we propose two unique solutions for this challenge: Extended Advanced Global Alignment (EAGA) and Shot Shape Compensator (SSC). EAGA is an alignment measurement function that can measure the position and shape of all shots on the wafer. SSC is an exposure function that adjusts the shape of exposure shots according to the shape of the underlying layer's shot on the distorted wafer, by controlling both the XY magnification difference and skew component of the projection optical system. In order to realize the SSC system in i-line stepper, Canon has introduced a new compensation mechanism featuring “two-dimensional Alvarez” optical elements. One other challenge is to detect alignment marks located on the back surface of the silicon wafer and for this challenge, Canon has employed a new alignment system using infrared light. In this paper, we will provide detailed descriptions along with exposure results using these solutions. We will also delve into the possibility of additional process applications that can benefit from the enhanced overlay accuracy provided by Canon i-line lithography systems.

Citation Download Citation

Yuhei Sumiyoshi, Ryo Sasaki, Yasuo Hasegawa, Kentaro Ushiku, Hirotaka Sano, Atsushi Shigenobu, Bunsuke Takeshita, and Seiya Miura "The solution to enhance i-line stepper applications by improving mix and match process overlay accuracy", Proc. SPIE 9052, Optical Microlithography XXVII, 90520H (31 March 2014); https://doi.org/10.1117/12.2046769

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available