Surface and bulk effects in silica fibers caused by 405 nm CW diode laser irradiation and means for mitigation

C. P. Gonschior; K.-F. Klein; T. Sun; K. T. V. Grattan

doi:10.1117/12.976837

4 December 2012 Surface and bulk effects in silica fibers caused by 405 nm CW diode laser irradiation and means for mitigation

C. P. Gonschior, K.-F. Klein, T. Sun, K. T. V. Grattan

Author Affiliations +

Proceedings Volume 8530, Laser-Induced Damage in Optical Materials: 2012; 85300A (2012) https://doi.org/10.1117/12.976837
Event: SPIE Laser Damage, 2012, Boulder, Colorado, United States

Abstract

Surface and bulk effects in silica optics due to high intensity laser light are well known using short pulse and high power laser systems. Surfaces are quickly destroyed mechanically if not properly prepared and thoroughly cleaned. Linear and non-linear absorption of high intensity laser light in the bulk of the optics causes material modifications, like voids, cracks and UV defects. In ablation experiments with very short pulses on wide band-gap dielectrics, periodic surface structures in the form of ripples were found. Surprisingly, we found similar structures on fiber end-faces after long-term irradiation with 405 nm CW laser light. Power densities on the end-face are in the range of 1 MW/cm², three magnitudes of order below the power threshold at which the described damages occur. Nevertheless a ripple structure perpendicular to the polarization direction of the laser was formed and grows with irradiation time. An increased absorption band at 214 nm (E' center) along the fiber was discovered by spectral absorption measurements. E' centers can be generated by 405 nm laser light in the bulk, therefore defects on the surface are possible as well. The generation of defect centers on the silica surface can enhance the formation of an unstable surface layer.

Citation Download Citation

C. P. Gonschior, K.-F. Klein, T. Sun, and K. T. V. Grattan "Surface and bulk effects in silica fibers caused by 405 nm CW diode laser irradiation and means for mitigation", Proc. SPIE 8530, Laser-Induced Damage in Optical Materials: 2012, 85300A (4 December 2012); https://doi.org/10.1117/12.976837

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available