Paper
24 February 2010 Characterization of UV single-mode and low-mode fibers
Author Affiliations +
Abstract
There is an increasing demand for UV single-mode fibers with long-term stability. Due to the small diameter, the coupling efficiency is extremely low, if broadband light-sources or LEDs with near field diameter in the order of approx. 500 μm are used. Therefore, UV lasers are the real candidates for these fibers. Although the power is in the order of several milliwatts, the intensity in the small fiber core is significantly high. Therefore, UV damage has to be taken into account, even in the wavelength region above 300 nm. After the introduction of adjusted measurement systems for these fibers, the properties of some low-mode and single-mode fibers will be shown and discussed.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
C. P Gonschior, D. Eimer, K.-F. Klein, T. Sun, and K. T. V. Grattan "Characterization of UV single-mode and low-mode fibers", Proc. SPIE 7559, Optical Fibers and Sensors for Medical Diagnostics and Treatment Applications X, 75590X (24 February 2010); https://doi.org/10.1117/12.842641
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication and 10 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Single mode fibers

Ultraviolet radiation

Semiconductor lasers

Fiber lasers

Absorption

Sensors

RELATED CONTENT

Radiation hardening of FBG in harsh environments
Proceedings of SPIE (June 02 2014)
Carbon nanotubes for mode-locking: polarization study
Proceedings of SPIE (March 14 2016)
Fiber Optic Bragg Grating Sensors
Proceedings of SPIE (February 13 1990)
High-speed wavelength-swept lasers
Proceedings of SPIE (May 12 2006)

Back to Top