Paper
30 June 1987 Direct Patterning Of Polyimide By Pulsed Electron Beams In Soft Vacuum
Jayaram Krisinaswamy, Lumin Li, George Collins, Hiroyuki Hiraoka, Mary Ann Caolo
Author Affiliations +
Abstract
We recently reported on a proximity, flood exposure process using pulsed electron beams.1 We showed replication of 0.5 um feature sizes from an electron transmitting stencil mask on to 3 um PMMA film via 28 KV pulsed electron beams produced in air and helium at 50 mTorr. In this paper, we describe the direct patterning of a commercial polyimide spin coated on a silicon wafer and cured at 100°C by exposure to 28 KV pulsed electron beams (current pulse duration 500 nsec, FWHM and 100 pulses) produced in 50 mTorr air and helium. The exposed region of polyimide cross-linked and the region covered by the 7 um line on the electron microscope grid used as stencil mask was unaffected. Patterning was completed by wet development in N-methylpyrolidone at 21°C for 15 secs. We present developed thickness vs exposure characteristics and SEM photographs of developed patterns.
© (1987) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jayaram Krisinaswamy, Lumin Li, George Collins, Hiroyuki Hiraoka, and Mary Ann Caolo "Direct Patterning Of Polyimide By Pulsed Electron Beams In Soft Vacuum", Proc. SPIE 0773, Electron-Beam, X-Ray, and Ion-Beam Lithographies VI, (30 June 1987); https://doi.org/10.1117/12.940366
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Electron beam lithography

Electron beams

Photomasks

Helium

Polymethylmethacrylate

Scanning electron microscopy

Lithography

Back to Top