Paper
10 September 2009 Real-time 3D part metrology using polarization rotation
Gil Abramovich, Kevin Harding, Vijay Paruchuru, Swaminathan Manickam, Christopher Nafis, Joseph Czechowski, Arun Vemury
Author Affiliations +
Abstract
This paper describes a real time, low cost part metrology method for capturing and extracting 3D part data using a single camera and no moving elements. 3D capture in machine vision is typically done using stereo photogrammetry, phase shifting using structured light, or autofocus mechanism for depth capture. These methods rely on expensive and often slow components such as multiple cameras, specialized lighting, or motion components such as motors or piezoelectric actuators. We demonstrated a method for 3D capture using only a single camera, birefringent lenses and ultra-fast electronic polarization switches. Using multiple images acquired at different polarization states and thus different focal distances, a high-resolution 3D point cloud of a test part was extracted with a good match to the ground truth data. This paper will describe the operation of the method and discuss the practical limitations.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gil Abramovich, Kevin Harding, Vijay Paruchuru, Swaminathan Manickam, Christopher Nafis, Joseph Czechowski, and Arun Vemury "Real-time 3D part metrology using polarization rotation", Proc. SPIE 7432, Optical Inspection and Metrology for Non-Optics Industries, 743212 (10 September 2009); https://doi.org/10.1117/12.828805
Lens.org Logo
CITATIONS
Cited by 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Lenses

Cameras

Polarization

3D metrology

3D image processing

Image quality

Metrology

Back to Top