Paper
25 August 2006 Analytical and T-CAD modeling of pentacene thin-film transistors
Author Affiliations +
Abstract
Many researches report that the mobility in organic material is dependent on not only the gate field but also the grain size. There is also some evidence to prove that the gate length is strongly related to the carrier mobility. We construct both the analytical model of organic thin film transistor and the large signal circuit model designed by T-CAD to fit the measured I DS - V DS curves. We first apply basic I DS - V DS equations in both triode and saturation regions with mobility μ best fitted to measured I-V curves. The "best-fitted" μ increases with the gate length, and is related to the increase of total channel resistance due to the presence of small grains size of pentacene next to source/drain electrodes. We then use the Advanced Design System software to design the large signal circuit model. Similar to the MOSFET, we add the additional parameters to fit the I DS - V DS curves, ex: Rgd, Rgs, and Rp. Here, Rgd. With the circuit simulation, we find that Rgd presents the leakage current from gate to source, and it affects the slope of curves in the saturation region in the I DS - V DS curves. The equivalent circuit can fit the I DS - V DS curves very well with the proper parameter set.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yet-Min Chen, Yu-Sheng Chen, Jian-Jang Huang, Jiun-Haw Lee, Yu-Wu Wang, and Yi-Kai Wang "Analytical and T-CAD modeling of pentacene thin-film transistors", Proc. SPIE 6336, Organic Field-Effect Transistors V, 63361H (25 August 2006); https://doi.org/10.1117/12.679748
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Transistors

Resistance

Field effect transistors

Electrodes

Thin films

Circuit switching

Polymers

Back to Top