Paper
4 May 2005 A new monocyclic fluoropolymer for 157-nm and 193-nm photoresists
Author Affiliations +
Abstract
We earlier developed new monocyclic fluoropolymers (ASF-2) for F2 resist materials. But, it is necessary for ASF-2 to improve of their characteristics, especially the dry-etching resistance, in order to apply for ArF and F2 lithography at fine design rules. In this study, to improve the dry-etching resistance keeping good characteristics of ASF-2, we examined using two methods. The one is to co-polymerize with ASF-2; the other is to introduce protective groups. We synthesized a new series of fluorinated co-polymers (ASF-2 with various monomers, e.g., methacrylate derivatives and vinyl ester derivatives). We found that the dry-etching resistance was improved by co-polymerization. Especially, the co-polymer with methacrylates containing an adamantyl moiety had a good dry-etching resistance, 1.45 vs. conventional KrF resist. This co-polymer also kept a good transparency at 193 nm. The introduction of various protective groups to the hydroxyl group of ASF-2 was also investigated. As the result of the optimization of protective groups and a protecting ratio, the partially protected ASF-2 with CCOM protecting groups had a good transparency at 157 nm and a good etching resistance (1.42 vs. conventional KrF resist). Using partially CCOM protected ASF-2 with an appropriate protecting ratio, sub-60 nm line and space pattern in 150 nm-thick film was obtained.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Takashi Sasaki, Yoko Takebe, Osamu Yokokoji, Akihiko Otoguro, and Kiyoshi Fujii "A new monocyclic fluoropolymer for 157-nm and 193-nm photoresists", Proc. SPIE 5753, Advances in Resist Technology and Processing XXII, (4 May 2005); https://doi.org/10.1117/12.599162
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polymers

Resistance

Transparency

Lithography

Fluorine

Polymerization

Etching

Back to Top