High-repetition-rate excimer lasers for 193-nm lithography

Wolfgang Zschocke; Hans Stephen Albrecht; Thomas Schroeder; Igor Bragin; Peter Lokai; Farid Seddighi; Christian Reusch; Anna Cortona; Kai Schmidt; Rainer Paetzel; Klaus Vogler

doi:10.1117/12.474561

30 July 2002 High-repetition-rate excimer lasers for 193-nm lithography

Wolfgang Zschocke, Hans Stephen Albrecht, Thomas Schroeder, Igor Bragin, Peter Lokai, Farid Seddighi, Christian Reusch, Anna Cortona, Kai Schmidt, Rainer Paetzel, Klaus Vogler

Author Affiliations +

Proceedings Volume 4691, Optical Microlithography XV; (2002) https://doi.org/10.1117/12.474561
Event: SPIE's 27th Annual International Symposium on Microlithography, 2002, Santa Clara, California, United States

Abstract

Capital costs and economical efficiency is becoming the most important criteria for any decision on lithography tools for an advanced IC fabrication facility. Each lithography wavelength has to compete for productivity, cost efficiency and return of investment. Reliable high repetition rate laser light sources enabling high illumination power and wafer throughput are one of the fundamental prerequisites. In this paper we report on our recent progress in development of high repetition rate ultra-narrow line and semi-narrow band ArF lasers for advanced 193nm lithography. These lasers are designed for high NA refractive and catadioptic scanner tools targeting the 100 nm node and below. We present key performance data of our high repetition rate ArF- lasers which currently operate at 4 kHz with a spectral bandwidth of < 0.35 pm or 25 pm, and 20 W or 40 W, respectively. Improvements in the laser-internal metrology and faster regulation control result in better energy and wavelength stability, dose control and improved overall operation behavior. Ultra-narrow bandwidth emission combined with an extra ordinary high spectral purity E(95%) < 0.8 pm is achieved by a new design of the optical line narrowing module implemented into the A4005. Improvements in the tube design support a laser operation with repetition rates of greater than > 4kHz and with 75% duty cycle. Data on the main laser parameters in dependence on repetition rate are presented. These results indicate the robust performance of the A4005 for all operation conditions and suitable reliability and lifetime of the modules.

Citation Download Citation

Wolfgang Zschocke, Hans Stephen Albrecht, Thomas Schroeder, Igor Bragin, Peter Lokai, Farid Seddighi, Christian Reusch, Anna Cortona, Kai Schmidt, Rainer Paetzel, and Klaus Vogler "High-repetition-rate excimer lasers for 193-nm lithography", Proc. SPIE 4691, Optical Microlithography XV, (30 July 2002); https://doi.org/10.1117/12.474561

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available