Paper
5 September 2001 EUV mask cleaning by dry and wet processes
Hajime Nii, Hiroo Kinoshita, Takeo Watanabe, Y. Matsuo, Y. Sugie
Author Affiliations +
Abstract
In the present ULSI cleaning processes, a photoresist is usually stripped by a combination of dry ashing by ozone (O3) with wet process of the piranha cleaning. The effects of cleaning process of the mask for the extreme ultraviolet lithography (EUVL) are discussed in these dry and wet processes. In dry ashing by O3, the virtual EUVL mask adhered organic contamination is tested. After removing the contamination using a dry ashing by O3, the surface roughness of the mask is decreased from -.54 nm (rms) to 0.42 nm (rms). Also, the periodic structure of the m ask is confirmed. The dry ashing by O3 is effective for removing a contamination of EUVL mask. In wet process, the piranha cleaning and typical RCA wet cleaning are employed at Mo/Si multilayer. The periodic structure of Mo/Si multilayer did not change after Piranha and RCA cleaning except FH solution in dipping long time. We confirmed the Mo/Si multilayer have enough tolerance to the Piranha and RCA cleaning.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hajime Nii, Hiroo Kinoshita, Takeo Watanabe, Y. Matsuo, and Y. Sugie "EUV mask cleaning by dry and wet processes", Proc. SPIE 4409, Photomask and Next-Generation Lithography Mask Technology VIII, (5 September 2001); https://doi.org/10.1117/12.438368
Lens.org Logo
CITATIONS
Cited by 11 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Contamination

Multilayers

Silicon

Ozone

Extreme ultraviolet lithography

Surface roughness

RELATED CONTENT


Back to Top