EUV mask absorber defect size requirement at 100-nm design rules

Pei-yang Yan; Guojing Zhang; Jenn Chow; Patrick Kofron; Joseph C. Langston; Harun H. Solak; Patrick A. Kearney; Gregory Frank Cardinale; Kurt W. Berger; Craig C. Henderson

doi:10.1117/12.309627

5 June 1998 EUV mask absorber defect size requirement at 100-nm design rules

Pei-yang Yan, Guojing Zhang, Jenn Chow, Patrick Kofron, Joseph C. Langston, Harun H. Solak, Patrick A. Kearney, Gregory Frank Cardinale, Kurt W. Berger, Craig C. Henderson

Author Affiliations +

Proceedings Volume 3331, Emerging Lithographic Technologies II; (1998) https://doi.org/10.1117/12.309627
Event: 23rd Annual International Symposium on Microlithography, 1998, Santa Clara, CA, United States

Abstract

In this paper, the printability of Extreme UV (EUV) mask defects at 100 nm design rule is studied via top surface imaging (TSI) resist process. The EUV mask defect size requirement is determined by taking into account the wafer process critical dimension (CD) variability. In the experiment, a programmed EUV absorber defect mask was first fabricated by subtractive metal patterning on a Mo/Si multilayer-coated silicon wafer substrate. The 10X experimental EUV lithography system with 13.4 nm exposure wavelength and 0.08 NA imaging lens was used to expose the programmed defect mask. The resists CD response to the metal absorber mask defect area is measured under different process conditions, i.e., different exposure doses. It is found that similar to a single-layer DUV resist cases that have been studied before, the EUV resist CD responds to the mask defect area linearly for small mask defects. From such a set of CD-defect response lines, the allowable absorber mask defect requirement is assessed via the statistical explanation of the printable mask defect size, which is tied to the wafer process specifications and the actual wafer process CD controllability. Our results showed that a clear and an opaque intrusion absorber mask defect as small as 60- 80 nm is printable at 100 nm design rules. Based on the statistical defect printability analysis method that we have developed, the printable mask defect size can always be redefined without additional data collection when the process controllability or the process specification changes.

Citation Download Citation

Pei-yang Yan, Guojing Zhang, Jenn Chow, Patrick Kofron, Joseph C. Langston, Harun H. Solak, Patrick A. Kearney, Gregory Frank Cardinale, Kurt W. Berger, and Craig C. Henderson "EUV mask absorber defect size requirement at 100-nm design rules", Proc. SPIE 3331, Emerging Lithographic Technologies II, (5 June 1998); https://doi.org/10.1117/12.309627

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available