Mask-to-wafer alignment using x-ray-printed alignment marks in x-ray lithography

S. E. Liang; Alex L. Flamholz; John F. Conway

doi:10.1117/12.146512

24 June 1993 Mask-to-wafer alignment using x-ray-printed alignment marks in x-ray lithography

S. E. Liang, Alex L. Flamholz, John F. Conway

Proceedings Volume 1924, Electron-Beam, X-Ray, and Ion-Beam Submicrometer Lithographies for Manufacturing III; (1993) https://doi.org/10.1117/12.146512
Event: SPIE'S 1993 Symposium on Microlithography, 1993, San Jose, CA, United States

Abstract

X-ray lithography can be used to achieve deep sub-micron design groundrules. With X-ray, as with other lithographic systems, mix and match techniques are often used to achieve timely, cost effective implementation. This can, in some cases, reduce overlay accuracy and complicate mask and wafer layout. In this paper we will present methods which will facilitate the use of X-ray lithography in mix and match environments to simplify layout and improve overlay accuracy. An alignment scheme for 0.35 micron CMOS device fabrication and a method for printing alignment marks for the next X-ray level are described. In this scheme all the critical levels such as oxide isolation, polysilicon gate, contact, and first metallization levels are printed using X-ray lithography with the same X-ray stepper (Karl Suss XRS200/2). All other noncritical levels are printed optically. The initial wafer lot using this scheme has been successfully processed to the first metallization level. The X-ray stepper alignment system can compensate for the first order overlay components such as translation and rotation. This feature is very useful for compensating for certain mask difference and process induced distortion. However, mask magnification difference must be compensated otherwise. A linear regression method has been used to analyze the overlay data and the results are fed back to the stepper for correction. A 3-sigma overlay distribution +/- 180 nm has been achieved.

Citation Download Citation

S. E. Liang, Alex L. Flamholz, and John F. Conway "Mask-to-wafer alignment using x-ray-printed alignment marks in x-ray lithography", Proc. SPIE 1924, Electron-Beam, X-Ray, and Ion-Beam Submicrometer Lithographies for Manufacturing III, (24 June 1993); https://doi.org/10.1117/12.146512

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
11 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Optical alignment

X-rays

Photomasks

X-ray lithography

Semiconducting wafers

Overlay metrology

X-ray optics

Show All Keywords

Keywords/Phrases

Search In:

Publication Years