Paper
1 June 1990 Deep-UV wafer stepper with through-the-lens wafer to reticle alignment
Stefan Wittekoek, Martin A. van den Brink, Henk F.D. Linders, Judon M. D. Stoeldraijer, J. W.D. Martens, Douglas R. Ritchie
Author Affiliations +
Abstract
A new excimer laser stepper at 248 nm wavelength Is described wilti an all quartz 5x reduction lens with NA 0. 42 and 21 . 2 mm field size. Design aspects and experimental data are reported. A key feature of the system is a ilL alignment system with direct referencing of reticle to wafer operating at 633 nm The problem of the large focal plane difference beiween exposure and alignment wavelength is solved by special correcflon oplics in the lens. The introducflon of exclmer lasers as new light sources for produclion optical lithography has been facilitated by a flexible optical interface beiween laser and stepper and by an on line calibrafion system to control the laser wavelength. Experimental results for resolution and overlay performance are gtven. 1 .
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Stefan Wittekoek, Martin A. van den Brink, Henk F.D. Linders, Judon M. D. Stoeldraijer, J. W.D. Martens, and Douglas R. Ritchie "Deep-UV wafer stepper with through-the-lens wafer to reticle alignment", Proc. SPIE 1264, Optical/Laser Microlithography III, (1 June 1990); https://doi.org/10.1117/12.20207
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical alignment

Deep ultraviolet

Semiconducting wafers

Reticles

Image sensors

Calibration

Distortion

Back to Top