The x-ray polarization of compact objects in x-ray binaries allows us to understand the complex spacetimes surrounding these sources. XL-Calibur is a state-of-the-art, balloon-borne telescope that measures the linear polarization of stellar-mass black holes, neutron stars, and nebulae in the 15-80 keV energy band. The selected energy range allows for observing coronal emission from black holes while also enabling us to narrow down on emission models from neutron stars, pulsars, and magnetars. Early in 2024, XL-Calibur will be launched from Kiruna, Sweden for approximately 10 days to observe Cyg X-1 and Cyg X-3, or other sources chosen based on flux levels at the time of flight. Observations might be coordinated with the recently launched Imaging x-ray Polarimetry Explorer mission which measures polarization in the complimentary 2-8 keV band. Combined XL-Calibur and IXPE observations will yield information on both soft and hard x-rays allowing us to decompose the total emission from black holes into thermal disk and coronal. We discuss the characterization of the XL-Calibur CdZnTe detectors, the telescope mirror and truss setup, and preliminary results from our most recent flight.
X-ray polarization measurements can provide unique information that is complementary to that obtained through spectroscopic or imaging observations. However, there have been few cases where significant x-ray polarization has been observed. XL-Calibur, conducted in collaboration between Japan, the United States of America, and Sweden, is a balloon-borne mission that aims to conduct high-sensitivity polarimetric observations in the hard x-ray band from 15 to 80 keV. The Japanese group is in charge of developing the Hard X-ray Telescope (HXT) with high light-gathering power. Optical adjustments were completed in 2020, and the performance of the HXT was measured in June 2021 at the SPring-8 (synchrotron radiation facility in Hyogo, Japan). Subsequently, in July 2022, the first observation was conducted from Sweden to Canada. After the flight, the HXT was recovered, and we measured its performance again. By comparing the HXT performances before and after the flight, we found no significant changes that can affect the second flight scheduled in 2024.
XL-Calibur is a balloon-borne mission for hard x-ray polarimetry. The first launch is currently scheduled from Sweden in summer 2022. Japanese collaborators provide a hard x-ray telescope to the mission. The telescope’s design is identical to the Hard X-ray Telescope (HXT, conically-approximated Wolter-I optics) on board ASTROH with the same focal length of 12 m and the aperture of 45 cm, which can focus x-rays up to 80 keV. The telescope is divided into three segments in the circumferential direction, and confocal 213 grazing-incidence mirrors are precisely placed in the primary and secondary sections of each segment. The surfaces of the mirrors are coated with Pt/C depth-graded multilayer to reflect hard x-rays efficiently by the Bragg reflection. To achieve the best focus, optical adjustment of all of the segments was performed at the SPring-8/BL20B2 synchrotron radiation facility during 2020. A final performance evaluation was conducted in June 2021 and the experiment yields the effective area of 175 cm2 and 73 cm2 at 30 keV and 50 keV, respectively, with its half-power diameter of the point spread function as 2.1 arcmin. The field of view, defined as the full width of the half-maximum of the vignetting curve, is 5.9 arcmin.
We have developed a novel x-ray interferometer, multi-image x-ray interferometer module (MIXIM), comprised of a fine aperture mask and an x-ray detector. The angular resolution of this system can be improved with an increase of the distance between two components or a decrease of the aperture size. Although MIXIM has already achieved an angular resolution of less than 0.1” by applying the Talbot effect with a periodic multi-pinhole mask, there remains the issue that its low opening fraction of 1.3% decreases the effective area of the imaging system. Therefore, we newly introduced periodic coded aperture masks which have opening fractions of about 50% instead of the multi-pinhole mask. Conducting an experiment with a 12.4 keV parallel x-ray beam, we successfully demonstrated that the periodic coded aperture could form the self-image, and obtained the x-ray source profile with sub-arcsecond angular resolution by deciphering the coded pattern. The effective area increases about 25 times compared with the multi-pinhole mask by the introduction of the periodic coded aperture masks, which indicates that this novel method can be effective for addressing the problem.
We intoduce our novel method of super high resolution astronomical X-ray imaging, Multi Image X-ray Interferometer Method, Modules, Missions (MIXIM). In series of experiments on the ground we not only verified the concept of MIXIM but also realized 2D imaging with angular resolution better than 0. ′′1. Employment of small pixel size CMOS sensor was the key to this achievement. Scalability is also an important feature of MIXIM., and various mission format is available. We show some examples from a very small satellite for sub arcsecond resolution to a formation flight with a millions km separation to gain µas resolution. MIXIM is different from X-ray mirrors in various points, for example, it does not have a collecting power. Considering the limitations and advantages of MIXIM, we should choose bright apparently point-like sources as targets. Nearby AGNs are primary ones, and the MIXIM scope just corresponds to spatial scales which have not yet resolved in X-rays.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.