The angular selectivity was analyzed theoretically and numerically in the holographic storage system with the spherical
wave as reference beam. The results show that angular selectivity relates with the crystal thickness and independent on z0.
Experiments performed with Zn:Fe:LiNbO3 crystals also proved the prediction.
A beads wire-based setup has been devised to satisfy the operation conditions of the underwater diamond wire saw. The mechanical model is established based on micro components when the string bead wire keeps stable cutting. The proper tension can be obtained according to the model under the current conditions, which provides a theoretical foundation for selecting the drive components of the annular frame design. The basic structure and the working principle of the tension sensor are introduced, and its performance index is analyzed, which meets the design demand. Tension detection test shows that the mechanical model is correct and the force feedback-based control of the radial feeding velocity is feasible, which is beneficial for working efficiency. The tension sensor is waterproof and shockproof which satisfies the demand for underwater inspection and control.
An iterative method designed by angle multiplexing holographic storage is introduced to determine exposure schedule for multiplexing storage in Zn(2mol.%):Fe(0.03wt.%):LiNbO3 crystal. In this experiment, 60 holograms were recorded in the same location of the crystal with 2mJ/cm2 incident exposure energy per hologram (0.7s exposure time at 2.8mW/cm2 total incident intensity). And the self-correlation peaks of holograms were collected by CCD. We found that the cumulative grating strength of correlation peak versus exposure energy could be fitted to be a sixth-order polynomial, and made use of an iterative expression to calculate the exposure schedule for 60 holograms. The correlation recognition of 99 pictures with 16 levels gray is completed and the accuracy is 100%, while an appropriate exposure schedule is used to store the two-dimensional holograms.
We have designed a compact holographic data storage (CHDS) system based on the principle of volume holographic storage and angular multiplexing, using a spherical wave as the reference beam. The CHDS system has large-capacity, high-speed and can retrieve data without changing it, which will provide a revolutionary memory technology. In the experiment, pages of information were recorded and retrieved with the same spherical reference beam. A new method of multiplexing, which is angular multiplexing, furthermore, was developed to maximize the storage capacity, data transfer rate, and minimize the system volume. The main difference between this new method and traditional ones is that we rotate the recording material instead of shifting it. A real experiment system was set up with a volume of 28×18×16cm3 in our laboratory.
Zn:Fe:LiNbO3 crystal has shorter response time and higher damage resistance ability than Fe:LiNbO3 crystal because of the doping of Zn ions, and the diffraction efficiency in Zn:Fe:LiNbO3 is comparable to that in Fe:LiNbO3 crystal. Transmission holographic recording geometry has been taken for its larger attainable dynamic range and sensitivity than that of the 90-degree geometry. Although there is relatively strong fanning effect in transmission geometry, Zn ions in the co-doped Zn:Fe:LiNbO3 crystal can restrain the fanning effect effectively. In our experiment, 60 holograms were angularly multiplexed and 72 spots were spatially multiplexed without hologram fixing technology, and the holograms can be stored more than ten days. A storage density of 4Gbits/cm3 has been obtained. The whole writing/reading process was accomplished automatically.
The infrared spectra of congruent LiNbO3:Fe:M (M= Mg2+, Zn2+, In3+, [Li]/[Nb]=0.946) crystals with 0.03wt% Fe2O3 were measured by a FT-IR spectrometer from 3400cm-1 to 3580cm-1. The spectra show that OH- absorption band of double-doped LiNbO3:Fe:M crystal locates at about 3482 cm-1 as that of single-doped LiNbO3:Fe crystals, and it is not shifted to ultraviolet band until the concentrations of M exceeds its concentration threshold. The threshold of damage-resistant ions M is 6mol% Zn2+, 4mol% Mg2+ and 3mol% In3+, respectively. The OH- absorption band of M-doped (>concentration threshold) LiNbO3:Fe crystals shifted to 3535, 3525 and 3508 cm-1, which results from the OH- stretching vibration in [MNb]a--OH--[MLi]b+ complexes. The influence of valence on the concentrate threshold is also discussed.
At first, this paper introduces the structure of the design- image capturing system using the single-stripe pattern. At second, its operating principle is introduced, its mathematical model is established and the calibrating method for it is put forward. At last, its prototype is produced and calibrated.
At first, this paper introduces the principle of our section outline sensor using the single-stripe pattern. At second, the measurement error of our sensor is analyzed: the error factors causing the measurement error of our sensor are found out; the mathematical expressions of the measurements are deduced. At third, the measures to reduce the measurement error and the design rules of our sensor are given. At last, a design example is given.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.