The optical rogue wave (RW), known as a short-lived extraordinarily high amplitude dynamics phenomenon with small appearing probabilities, plays an important role in revealing and understanding the fundamental physics of nonlinear wave propagations in optical systems. The random fiber laser (RFL), featured with cavity-free and “modeless” structure, has opened up new avenues for fundamental physics research and potential practical applications combining nonlinear optics and laser physics. Here, the extreme event of optical RW induced by noise-driven modulation instability that interacts with the cascaded stimulated Brillouin scattering, the quasi-phase-matched four-wave mixing as well as the random mode resonance process is observed in a Brillouin random fiber laser comb (BRFLC). Temporal and statistical characteristics of the RWs concerning their emergence and evolution are experimentally explored and analyzed. Specifically, temporally localized structures with high intensities including chair-like pulses with a sharp leading edge followed by a trailing plateau appear frequently in the BRFLC output, which can evolve to chair-like RW pulses with adjustable pulse duration and amplitude under controlled conditions. This investigation provides a deep insight into the extreme event of RWs and paves the way for RW manipulation for its generation and elimination in RFLs through adapted laser configuration.
We report the use of a femtosecond infrared (fs-IR) laser to produce random grating structures in optical fibers for fiber sensor and fiber laser applications. The plane-by-plane method of inscribing various gratings is presented. We review our experimental results over the past 5 years of the applications of fiber random gratings for distributed temperature measurements, fiber lasers and fiber laser sensors. The potential applications of fs-IR laser processed optical fibers in structure health monitoring, harsh environment sensing, perimeter intrusion detection and encrypted communication will be discussed.
Femtosecond Infrared (fs-IR) laser written fiber Bragg gratings (FBGs), have shown great potential for sensing in extreme environments. This paper presents the fabrication and deployment of two fs-IR laser written FBG temperature probes, for monitoring temperature gradients on the flame tube of a low emission burner, during a high pressure combustor test of an optically accessible combustor rig (OACR).
Results of this work include: contour plots of measured internal and exhaust temperature gradients, contrast of FBG measurements with thermocouple data, discussion of deployment strategies, as well as comments on reliability and other important considerations.
Femtosecond infrared (fs-IR) laser written fiber Bragg gratings (FBGs), have demonstrated great potential for extreme sensing. Such conditions are inherent in advanced gas turbine engines under development to reduce greenhouse gas emissions; and the ability to measure temperature gradients in these harsh environments is currently limited by the lack of sensors and controls capable of withstanding the high temperature, pressure and corrosive conditions present. This paper discusses fabrication and deployment of several fs-IR written FBG arrays, for monitoring exhaust temperature gradients of a gas turbine combustor simulator. Results include: contour plots of measured temperature gradients, contrast with thermocouple data.
Plane-by-plane fabrication of fiber Bragg gratings in optical fibers using short-pulse femtosecond IR laser is proposed and demonstrated. By incorporating a cylindrical lens in the fabrication setup, a plane of index modification can be directly inscribed in fiber core by a single laser pulse through the proposed method. This plane-by-plane method simplifies the grating inscription process and allows for the fabrication of complicated grating structures.
Two novel configurations of multi-parameter fiber-optic sensing systems based on the fiber random grating are reported. The fiber random grating is fabricated through femtosecond laser induced refractive index modification over a 10cm standard telecom single mode fiber. In one configuration, the reflective spectrum of the fiber random grating is directly detected and a wavelength-division spectral cross-correlation algorithm is adopted to extract the spectral shifts for simultaneous measurement of temperature, axial strain, and surrounding refractive index. In the other configuration, a random fiber ring laser is constructed by incorporating the random feedback from the random grating. Numerous polarization-dependent spectral filters are formed along the random grating and superimposed to provide multiple lasing lines with high signal-to-noise ratio up to 40dB, which enables a high-fidelity multi-parameter sensing scheme by monitoring the spectral shifts of the lasing lines. Without the need of phase mask for fabrication and with the high physical strength, the random grating based sensors are much simpler and more compact, which could be potentially an excellent alternative for liquid medical sample sensing in biomedical and biochemical applications.
Fiber Bragg gratings (FBG) arrays in silica based optical fibers are increasingly used in applications involving system monitoring in extreme high temperature environments. Where operational temperatures are < 600 °C, traditional UVlaser inscribed FBGs are not appropriate since the induced Type I index change is erased. Instead two competing FBG technologies exist: 1) regenerative FBGs resulting from high temperature annealing of a UV-laser written grating in a hydrogen loaded fiber and 2) FBGs written with femtosecond infrared pulse duration radiation (fs-IR), either using the point-by-point method or using the phase mask approach. Regenerative gratings possess low reflectivity and are cumbersome to produce, requiring high temperature processing in an oxygen free environment. Multiple pulse Type II femtosecond IR laser induced gratings made with a phase mask, while having very good thermal stability, also tend to have high insertion loss (~ 1dB/grating) limiting the number of gratings that can be concatenated in a sensor array. Recently it has been shown that during multiple pulse type II thermally stable fs-IR FBG production, two competing process occur: an initial induced fs-IR type I FBG followed by a thermally stable high insertion loss type II FBG. In this paper, we show that if only a type I FBG is written using type II intensity conditions but limited numbers of pulses and then annealed above 600 °C, the process results in a type II grating that is stable up to 1000 °C with very low insertion loss ideal for an FBG sensor array.
Robert Walker, Huimin Ding, David Coulas, Dan Grobnic, Ping Lu, Stephen Mihailov, Marc Duchesne, Robin Hughes, David McCalden, Ryan Burchat, Robert Yandon
Femtosecond pulse duration infrared laser (fs-IR) written fiber Bragg gratings (FBGs), have demonstrated great potential for extreme environment sensing. Harsh environments are inherent to the advanced power plant technologies under development to reduce greenhouse gas emissions. The performance of new power systems are currently limited by the lack of sensors and controls capable of withstanding the high temperature, pressure and corrosive conditions present. This paper discusses fabrication and deployment of several fs-IR written FBG arrays, for monitoring the temperature distribution within a fluidized bed combustor. Results include: calibration data to ~ 1100 °C, discussion of deployment strategies, contrast with thermocouple data, and comments on reliability.
The design for a photonic microwave filter tunable in both bandwidth and operating frequency is proposed and experimentally demonstrated. The circuit is based on a single sideband modulator used in conjunction with two or more transmission fiber Bragg gratings (FBGs) cascaded in series. It is demonstrated that the optical filtering characteristics of the FBGs are instrumental in defining the shape of the microwave filter, and the numerical modeling was used to optimize these characteristics. A multiphase-shift transmission FBG design is used to increase the dynamic range of the filter, control the filter ripple, and maximize the slope of the filter skirts. Initial measurements confirmed the design theory and demonstrated a working microwave filter with a bandwidth tunable from approximately 2 to 3.5 GHz and an 18 GHz operating frequency tuning range. Further work is required to refine the FBG manufacturing process and reduce the impact of fabrication errors.
Fiber Bragg grating sensors have been developed beyond a laboratory curiosity to become a mainstream sensing technology because of their small size, passive nature, immunity to electromagnetic interference, and capability to simultaneously measure multiple physical parameters such as temperature, strain and pressure. Recently, high temperature stable gratings based on regeneration techniques and femtosecond infrared laser processing have shown promise for use in extreme environments such as high temperature, pressure or ionizing radiation. Such gratings are ideally suited for energy production applications where there is a requirement for advanced energy system instrumentation and controls that are operable in harsh environments. This presentation will give a review of some of the more recent developments of femtosecond laser induced fiber Bragg gratings.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.