The Very Large Telescope Interferometer (VLTI) on Cerro Paranal (2635 m) in Northern Chile reached a major milestone in September 2003 when the mid infrared instrument MIDI was offered for scientific observations to the community. This was only nine months after MIDI had recorded first fringes. In the meantime, the near infrared instrument AMBER saw first fringes in March 2004, and it is planned to offer AMBER in September 2004.
The large number of subsystems that have been installed in the last two years - amongst them adaptive optics for the 8-m Unit Telescopes (UT), the first 1.8-m Auxiliary Telescope (AT), the fringe tracker FINITO and three more Delay Lines for a total of six, only to name the major ones - will be described in this article. We will also discuss the next steps of the VLTI mainly concerned with the dual feed system PRIMA and we will give an outlook to possible future extensions.
Since February 2000, the Washing & Coating Unit of Paranal Observatory, one of the master piece in the coating and re-coating of the VLT mirrors, has been continuously improved. Details of those works will be described as well as the washing process revealed. Measured data will be presented and the efforts made at ESO since 1998 to define suitable on-line monitoring and preventive maintenance will be detailed. In-situ techniques, existing equipment and procedures will be reviewed. Emphasis will be put on the CO2 snow-flake technique and the re-enable of the peelable lacque (XL Clean 5) will be described. The plans for the long-term optical maintenance of the VLT and VLTI mirrors will be exposed.
The Very Large Telescope (VLT) Observatory on Cerro Paranal (2635 m) in Northern Chile is approaching completion. After the four 8-m Unit Telescopes (UT) individually saw first light in the last years, two of them were combined for the first time on October 30, 2001 to form a stellar interferometer, the VLT Interferometer. The remaining two UTs will be integrated into the interferometric array later this year. In this article, we will describe the subsystems of the VLTI and the planning for the following years.
On March 17, 2001, the VLT interferometer saw for the first time interferometric fringes on sky with its two test siderostats on a 16m baseline. Seven months later, on October 29, 2001, fringes were found with two of the four 8.2m Unit Telescopes (UTs), named Antu and Melipal, spanning a baseline of 102m. First shared risk science operations with VLTI will start in October 2002. The time between these milestones is used for further integration as well as for commissioning of the interferometer with the goal to understand all its characteristics and to optimize performance and observing procedures. In this article we will describe the various commissioning tasks carried out and present some results of our work.
Two years after the first light of UT1 a summary of the On- site optical maintenance situation seems necessary. A comparison with the Maintenance Program developed in Europe will be commented. Measured data on the large mirrors and the efforts to maintain and improve the on-site contamination at a low level will be presented. Data and pictures will illustrate the CO2 in-situ cleaning technique, advantage and disadvantage. Methods and results of the AMOS washing unit, in the preparation of mirrors before coating, will be presented. Emphasis will be put on the reflective Al coating quality of the LINDE coating unit and the achieved reflectivity data demonstrated.
It seems to be a fundamental law of nature that optical surfaces become dirty. On-site contamination has been recorded at the ESO La Silla Observatory and at the VLT site over a period of six years. Measured data are presented, and the efforts made at ESO since 1990 to define suitable on-line monitoring and preventive maintenance are detailed. In-situ cleaning techniques, existing equipment and procedures are reviewed. Emphasis is put on the carbon-dioxide snowflake cleaning technique and the integrated cleaning device of the 3.5 m NTT telescope is described. The preliminary cleaning and protection test conducted on the first finished 8 m mirror at the optical manufacturer's site is presented as well, and plans for the in-situ cleaning of the VLT mirrors are explained.
A long term survey of airborne particles was initiated in 1992 at the VLT Observatory of Cerro Paranal to establish the cleanliness of the telescope area before the start of construction work. The results presented in this paper shows large variations with time of the density of inhalable particles (< 10 micrometers ), and a very low density of the larger aerosols when compared to clean room industrial standards. In parallel with the aerosol survey, an analysis of the damage caused to mirror coatings was conducted by periodically exposing sets of mirrors outdoors at 10 m above ground level for periods of two weeks. A follow-up of the evolution: with time and meteorological conditions of the reflectivity, diffusion and scattering coefficients gives insights on mirror maintenance requirements in modern telescopes using natural air flushing to right local seeing. From the study of damages caused during wind storms, some new constraints on operational limits are discussed, in particular with regards to the protection of an unbaffled secondary mirror.
The latest developments of active optics of the ESO NTT include the reduction of friction in the lateral supports of
the primary mirror and in the positioning system of the secondary mirror. The most important remaining problem
is the local air condition. The implications for the ESO VLT and the latest developments in the design of its active
optics are discussed.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.