Funded by the Ministry of Commerce, Industry, and Energy of Korea, SI initiated the development of the prototype model of TMA-based electro-optical system as part of the national space research and development program. Its optical aperture diameter is 120 mm, the effective focal length is 462 mm, and its full field-of-view is 5.08 degrees. The dimension is of about 600 mm × 400 mm × 400 mm and the weight is less than 15 kg.
To demonstrate its performance, hyper-spectral imaging based on linear spectral filter is selected for the application of the prototype. The spectral resolution will be less than 10 nm and the number of channels will be more than 40 in visible and nearinfrared region.
In this paper, the progress made so far on the prototype development will be presented
Satrec Initiative and ATSB have been developing a medium-sized aperture camera (MAC) for an earth observation payload on a small satellite. Developed as a push-broom type high-resolution camera, the camera has one panchromatic and four multispectral channels. The panchromatic channel has 2.5m, and multispectral channels have 5m of ground sampling distances at a nominal altitude of 685km. The 300mm-aperture Cassegrain telescope contains two aspheric mirrors and two spherical correction lenses. With a philosophy of building a simple and cost-effective camera, the mirrors incorporate no light-weighting, and the linear CCDs are mounted on a single PCB with no beam splitters. MAC is the main payload of RazakSAT to be launched in 2005. RazakSAT is a 180kg satellite including MAC, designed to provide high-resolution imagery of 20km swath width on a near equatorial orbit (NEqO). The mission objective is to demonstrate the capability of a high-resolution remote sensing satellite system on a near equatorial orbit. This paper describes the overview of the MAC and RarakSAT programmes, and presents the current development status of MAC focusing on key optical aspects of Qualification Model.
SpaceEye-1 earth observation satellite, developed by Satrec Initiative Co. Ltd., is a 300 kg scale spacecraft with high resolution electro-optical payload (EOS-D) which performs 1 m GSD, 12 km swath in low earth orbit. Metering structure of EOS-D is manufactured with Carbon Fiber Reinforced Plastic (CFRP). Due to the moisture emission from CFRP metering structure, this spaceborne electro-optical payload undergoes shrinkage after orbit insertion. The shrinkage of metering structure causes change of the distance between primary and secondary mirror. In order to compensate the moisture shrinkage effect, two types of thermal refocusing mechanism were developed, analyzed and applied to EOS-D. Thermal analysis simulating in-orbit thermal condition and thermo-elastic displacement analysis was conducted to calculate the performance of refocusing mechanism. For each EOS-D telescope, analytical refocusing range (displacement change between primary and secondary mirror) was 2.5 um and 3.6 um. Thus, the refocusing mechanism can compensate the dimensional instability of metering structure caused by moisture emission. Furthermore, modal, static and wavefront error analysis was conducted in order to evaluate natural frequency, structural stability and optical performance. As a result, it can be concluded that the refocusing system of EOS-D payload can perform its function in orbit.
KEYWORDS: Modulation transfer functions, Cameras, Spatial frequencies, Modulation, Fermium, Frequency modulation, Imaging systems, Near infrared, Signal to noise ratio, Mirrors
Pre-launch performance has been characterized on the EOS-C camera: capable of Earth observation at 2.5 m resolution
and 20 km swath width. Topics discussed in this paper include measurements of system modulation transfer function
(MTF) and pixel lines-of-sight (LOS); radiometric and spectral calibration; end-to-end imaging.
Funded by the Ministry of Commerce, Industry, and Energy of Korea, Satrec Initiative has initiated the development of
the prototype model of a TMA-based electro-optical system as part of the national space research and development
program. Its optical aperture diameter is 120 mm, the effective focal length is 462 mm, and its full field-of-view is 5.08
degrees. The dimension is about 600 mm × 400 mm × 400 mm and its weight is less than 15 kg.
To demonstrate its performance and versatility, multi-spectral imaging in visible and near-infrared region was chosen as
the application of the prototype.
In this paper, the progress made so far on the prototype development and the future plan will be presented.
The mission of DIOS program is to provide the function of large-swathwidth or in-track stereo imaging with compact
electro-optical cameras. Optimized from its predecessor SAC (Small-sized Aperture Camera), DIOS consists of two
cameras, each with an aperture of 120 mm diameter, 10 m GSD, and 50 km swath width in the spectral range of 520 ~
890 nm. DIOS is developed to produce high quality images: MTF of more than 12 %; SNR of more than 100. DIOS can
be configured to have cameras side-by-side, providing a swathwidth up to 100 km for a mission of large swathwidth.
DIOS will be configured with installation of slanted two cameras for the mission of in-track stereo imaging to produce
digital elevation model. In this paper, Dual Imaging Optical Sensor (DIOS) will be introduced with design approach and
performance measure. Even though developed for micro satellites, the presentation of development status and test
results will demonstrate the potential capability that DISO can provide for world-wide remote sensing groups: short
development period, cost-effectiveness, wide application ranges, and high performance.
Medium-sized Aperture Camera (MAC) is the main payload for Earth observation satellite RazakSAT to be launched at the end of 2005. The flight model has been recently assembled and tested. The 300 mm diameter Cassegrain telescope optics and the focal plane assembly for a space camera have been aligned. Topics discussed in this paper include the lessons learned from the optics alignment and assembly of the telescope and the focal plane. A computer-aided alignment method was used for the alignment of the relatively wide field of view (+/-1 deg) telescope. RMS wavefront error measurement environment was found to be more critical than previously experienced, and the importance of the initial alignment is discussed. System modulation transfer function (MTF) was used as the figure-of-merit for the alignment of the focal plane assembly with linear CCD detectors. MTF was measured by a knife-edge scanning technique using a dedicated 450 mm diameter collimator with diffraction-limited performance.
Pre-flight performance has been characterized on the Medium-sized Aperture Camera (MAC) of the RazakSAT: capable of Earth observation at 2.5 m resolution and 20 km swath width. Topics discussed in this paper include measurements of system modulation transfer function (MTF) and pixel lines-of-sight (LOS); characterization of focal plane assembly (FPA) and signal processing electronics; end-to-end imaging. The MTF was obtained with knife-edge scanning technique, which is also used to align the FPA. For band-to-band registration, relative pixel LOS was measured using theodolite and effective focal length of the telescope was derived from the measurement. For the FPA and signal processing module, dark reference, pixel-to-pixel response variation and response linearity have been quantified. The end-to-end imaging tests were done to check the imaging function before the launch, by scanning a slide target at the focus of the collimator.
Collimator is essential to evaluate and assemble the other telescopes. Its diameter should be larger than that of the target telescope for the correct use. We are currently developing the Cassegrain type collimator of which diameter is 0.9 m. The primary mirror is light-weighted so that its weight is only 70 kg. Due to its structure, the primary mirror can be supported only at the backside of the mirror. This mirror is tested with the combination of null Hartmann test and interferometer. The secondary mirror is tested with a Hindle method. This method requires 600 mm high quality spherical mirror. The distance between the primary and secondary mirror is maintained by the Carbon composite material. The assembly of two mirrors is carried out by the computer aided alignment method. The whole structure is designed to maintain the performance of the collimator under +/-5 degrees of temperature variation.
Medium-sized Aperture Camera (MAC) for earth observation on a small satellite is being developed by Satrec Initiative and ATSB. Designed as a cost-effective high-resolution camera, this push-broom type camera has 1 panchromatic and 4 multispectral channels using all-CCDs-in-one focal plane, and it does not split the channels by prisms. The panchromatic channel has 2.5m, and multispectral channels have 5m of ground sampling distance at a nominal altitude of 685km. The 300mm modified Ritchey-Chretien telescope contains two aspheric mirrors and two spherical correction lenses. MAC is the main payload of RazakSAT (formerly known as MACSAT) to be launched in 2005. RazakSAT is a 180kg (including MAC) small satellite, designed to provide high-resolution imagery of 20km swath width on a near equatorial orbit (NEqO). The mission objective is to demonstrate the capability of a high-resolution small remote sensing satellite system on a near equatorial orbit. This paper describes the status report on the development of the MAC Qualification Model and technical issues.
SAC is a compact camera for imaging in visible-NIR spectral ranges. SAC provides high-resolution images over the wide geometric and spectral ranges: 10 m GSD and 50 km swath-width in the spectral ranges of 520 ~ 890 nm. The missions incorporate various imaging operations: multi-spectral imaging; super swath-width imaging with cameras in parallel; along-track stereo imaging with slanted 2 cameras. In this paper, SAC is introduced with design and performance. Though developed for small satellites, presenting development status and test results will demonstrate the potential capability for worldwide remote sensing groups: short development period, cost-effectiveness, and high performance.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.