Free space optical (FSO) satellite communications has very attractive properties for Quantum Key Distribution (QKD). The quantum channel loss and noise are major factors in setting the maximum achievable secure key rate of QKD systems. Primarily for a LEO satellite node and the BB84 protocol a number of technologies are proposed to reduce the quantum channel loss and noise. These technologies apply to the receiver side of the QKD link, the Optical Ground Terminal. It is shown that an optical beam shaper to optimize fiber mode matching, dedicated thermo-mechanical design to reduce misalignment induced by temperature gradients and an Adaptive Optics (AO) system to counteract optical turbulence effects can result in a significant reduction of loss and background noise. A breadboard verification experiment shows that using an medium-size AO system can maintain a fiber coupling efficiency up to 40%. The developed technologies have a general applicability with respect to satellite orbit and QKD protocol used.
For the next generation of very high throughput communication satellites, TNO and DLR envision optical free-space communication between ground stations and geostationary telecommunication satellites to replace the traditional RF links. To mitigate atmospheric turbulence, an Adaptive Optics (AO) system will be used to apply uplink pre-correction. OFELIA, an ground terminal breadboard was developed to demonstrate the pre-correction principle over an realistic link. Currently, integration tests have been performed to verify the AO performance. Also a laser link experiment over 10 km distance has already been established, in a scenario relevant to ground-to-satellite links. The paper shows that AO is clearly beneficial for the downlink performance. In addition the first preliminary experimental results of the pre-correction show it is also beneficial for the uplink.
We present a novel optical design tool that makes use of an evolutionary global optimization algorithm. The algorithm has several characteristics that make it well-suited for freeform optics design. With the design tool it is no longer necessary to make the distinction between paraxial degrees of freedom and degrees of freedom related to freeform surface description. The design process, which typically involves a multi-stage scheme consisting of finding an optimal paraxial starting layout, optimization, gradually including freeform degrees of freedom to yield an optimal nominal design, and finally a step in which the as-built design is optimized, is shortened because optimal paraxial starting point and optimal freeform shapes are combined to a single optimization step. Optionally, as-built performance can be included in this step as well. The design tool is applied to the design of a compact spectrometer.
For the next generation of very high throughput communication satellites, free-space optical (FSO) communication between ground stations and geostationary telecommunication satellites is likely to replace conventional RF links. To mitigate atmospheric turbulence, TNO and DLR propose Adaptive Optics (AO) to apply uplink pre-correction. In order to demonstrate the feasibility of AO pre-correction an FSO link has been tested over a 10 km range. This paper shows that AO pre-correction is most advantageous for low point ahead angles (PAAs), as expected. In addition, an optimum AO precorrection performance is found at 16 AO modes for the experimental conditions. For the specific test site, tip-tilt precorrection accounted for 4.5 dB improvement in the link budget. Higher order AO modes accounted for another 1.5 dB improvement in the link budget. From these results it is concluded that AO pre-correction can effectively improve high-throughput optical feeder links.
TNO and DLR envision optical free-space communication between ground stations and geostationary telecommunication satellites to replace the traditional RF links for the next generation of Very High Throughput Satellites. To mitigate atmospheric turbulence, an Adaptive Optics (AO) system will be used. TNO and DLR are developing breadboards to validate Terabit/s communication links using an AO system. In this paper the breadboard activities and first results of the sub-systems will be presented. Performance of these subsystems will be evaluated for viability of terabit/s optical feeder links.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.