The GRAVITY+ project consists of instrumental upgrades to the Very Large Telescope Interferometer (VLTI) for faint-science, high-contrast, milliarcsecond interferometric imaging. As an integral part of the GRAVITY+ Adaptive Optics (AO) architecture, the Wavefront Sensor (WFS) subsystem corrects image distortions caused by the turbulence of Earth's atmosphere. We present the opto-mechanical design of the WFS subsystem and the design strategies used to implement two payloads positioned diagonally opposite each other - Natural Guide Star (NGS) and Laser Guide Star (LGS) - within a single compact design structure. We discuss the implementation of relative motions of the two payloads covering their respective patrol fields and a nested motion within the LGS Payload covering the complete Sodium layer profile in the Earth's atmosphere.
In the GRAVITY+ project, GRAVITY is presently undergoing a series of upgrades to enhance its performance, add wide field capability and thereby expand its sky coverage. Some aspects of these improvements have already been implemented and commissioned by the end of 2021, making them accessible to the community. The augmentation of sky coverage involves increasing the maximum angular separation between the celestial science object and the fringe tracking object from the previous 2 arcseconds (limited by the field of view of the VLTI) to 20 – 30 arcseconds (constrained by atmospheric conditions during observation). Phase 1 of GRAVITY+ Wide utilizes the earlier PRIMA Differential Delay Lines to compensate for the optical path length variation between the science and fringe tracking beams throughout an observation. In phase 2, we are upgrading the existing beam compressors (BC) to integrate optical path length difference compensation directly into the BC. This modification eliminates five optical reflections per beam, thereby enhancing the optical throughput of the VLTI–GRAVITY system and the bandwidth of the vibrational control. We will present the implementation of phase 2 and share preliminary results from our testing activities for GRAVITY+ Wide.
Fringe stability and tracking are a determining aspect for the performance of current interferometric observations. While the theory predicts that the aperture of large telescopes such as the VLTI UT should yield smoothed-out piston perturbations that could be compensated using a slow fringe tracker running at a few tens of Hz, this is far from the current experimental reality. In practice, the optical path variations observed with the GRAVITY fringe tracker still contain high frequency components that limit the fringe-tracking exposure time and therefore its precision and limiting magnitude. Most of these perturbations seem to come from mechanical vibrations in the train of mirrors, leading to the instrument, and in particular from the mirrors of the telescope. With this work, and as part of the GRAVITY+ efforts, accelerometers were added to all the mirrors of the coudé train, including the coming M8, to complement the existing instrumentation of M1, M2, and M3, and compensate in real-time the optical path using the main delay lines. We show how the existing architecture, while optimal for the first mirrors, is not suitable for the vibration content found in the new mirrors, and we opt instead for narrow-band filters based on phase-locked-loop filters (PLL). Thanks to this architecture, we were able to reclaim up to 50nm of OPD RMS from vibrations peaks between 40 and 200Hz. We also outline the avenues to push this approach further, through the upgrade of the deformable mirrors and the beam-compressor differential delay lines (BCDDL) as part of GRAVITY+, paving the way to obtaining better than 100nm RMS fringe tracking, even on faint targets.
The GRAVITY instrument has transformed the field of near-infrared interferometry and is redefining the limits of ground-based observations. In Galactic Center observations, this is shown by routinely achieving below 50 μas uncertainty on astrometric measurements within a 5-minute exposure and detecting stars fainter than 19th magnitude. Nevertheless, systematic effects are still limiting the instrument's performance. In this talk, I will introduce two observing modes to overcome these limitations: Pupil modulation to improve the astrometry and metrology attenuation to overcome SNR limitations. I will detail these two modes and show how significant the improvements are on examples of on-sky data.
We present the Wavefront Sensor units of the Gravity Plus Adaptive Optics (GPAO) system, which will equip all 8m class telescopes of the VLTI and is an instrumental part of the GRAVITY+ project. It includes two modules for each Wavefront Sensor unit: a Natural Guide Star sensor with high-order 40×40 Shack-Hartmann and a Laser Guide Star 30×30 sensor. The state-of-the-art AO correction will considerably improve the performance for interferometry, in particular high-contrast observations for NGS observations and all-sky coverage with LGS, which will be implemented for the first time on VLTI instruments. In the following, we give an overview of the Wavefront Sensor units system after completion of their integration and characterization.
The instrumentation of the Prime Focus Spectrograph (PFS), a next generation facility instrument on the Subaru telescope, is now in the final phase of its commissioning process and its general, open-use operations for sciences will provisionally start in 2025. The instrument enables simultaneous spectroscopy with 2386 individual fibers distributed over a very wide (∼1.3 degrees in diameter) field of view on the Subaru’s prime focus. The spectra cover a wide range of wavelengths from 380nm to 1260nm in one exposure in the Low-Resolution (LR) mode (while the visible red channel has the Medium-Resolution (MR) mode as well that covers 710−885nm). The system integration activities at the observatory on Maunakea in Hawaii have been continuing since the arrival of the Metrology Camera System in 2018. On-sky engineering tests and observations have also been carried out continually since September 2021 and, despite various difficulties in interlacing commissioning processes with development activities on the schedule and addressing some major issues on hardware and software, the team successfully observed many targeted stars as intended over the entire field of view (Engineering First Light) in September 2022. Then in parallel to the arrival, integration and commissioning of more hardware components, validations and optimizations of the performance and operation of the instrument are ongoing. The accuracy of the fiber positioning process and the speed of the fiber reconfiguration process have been recently confirmed to be ∼ 20−30μm for 95% of allocated fibers, and ∼130 seconds, respectively. While precise quantitative analyses are still in progress, the measured throughput has been confirmed to be consistent with the model where the information from various sub-components and sub-assemblies is integrated. Long integration of relatively faint objects are being taken to validate an expected increase of signal-to-noise ratio as more exposures are taken and co-added without any serious systematic errors from, e.g., sky subtraction process. The PFS science operation will be carried out in a queue mode by default and various developments, implementations and validations have been underway accordingly in parallel to the instrument commissioning activities. Meetings and sessions are arranged continually with the communities of potential PFS users on multiple scales, and discussions are iterated for mutual understanding and possible optimization of the rules and procedures over a wide range of processes such as proposal submission, observation planning, data acquisition and data delivery. The end-to-end processes of queue observations including successive exposures with updated plans based on assessed qualities of the data from past observations are being tested during engineering observations, and further optimizations are being undertaken. In this contribution, a top-level summary of these achievements and ongoing progresses and future perspectives will be provided.
MICADO is a first light instrument for the Extremely Large Telescope (ELT), set to start operating later this decade. It will provide diffraction limited imaging, astrometry, high contrast imaging, and long slit spectroscopy at near-infrared wavelengths. During the initial phase operations, adaptive optics (AO) correction will be provided by its own natural guide star wavefront sensor. In its final configuration, that AO system will be retained and complemented by the laser guide star multi-conjugate adaptive optics module MORFEO (formerly known as MAORY). Among many other things, MICADO will study exoplanets, distant galaxies and stars, and investigate black holes, such as Sagittarius A* at the centre of the Milky Way. After their final design phase, most components of MICADO have moved on to the manufacturing and assembly phase. Here we summarize the final design of the instrument and provide an overview about its current manufacturing status and the timeline. Some lessons learned from the final design review process will be presented in order to help future instrumentation projects to cope with the challenges arising from the substantial differences between projects for 8-10m class telescopes (e.g. ESO’s VLT) and the next generation Extremely Large Telescopes (e.g. ESO’s ELT). Finally, MICADO's expected performance will be discussed in the context of the current landscape of astronomical observatories and instruments. For instance, MICADO will have similar sensitivity as the James Webb Space Telescope (JWST), but with six times the spatial resolution.
Prime Focus Spectrograph (PFS) is a next generation instrument mounted on the Subaru telescope. It is a fiber-fed multiplex system covering a wide field of view (1.3 degree in diameter), which enables to acquire approximately 2400 spectra of science objects simultaneously. In order to efficiently use fibers, open-use programs will share fibers with each other (the fiber-sharing mode). Here, we introduce the PFS Pointing Planner (PPP), the tool to optimize the pointing centers. Its goal is to efficiently observe all allocated time of science programs while assigning as many fibers as possible to science targets on each pointing. The tool incorporates a flexible weight scheme which considers factors such as the science priority, surface density and exposure time. We present the simulation results of PPP with mock science programs, and discuss its performance in diverse science cases.
The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph designed for the prime focus of the 8.2m Subaru telescope. PFS will cover 1.3 degrees diameter field with 2394 fibers to complement the imaging capability of Hyper SuprimeCam (HSC). The prime focus unit of PFS called Prime Focus Instrument (PFI) provides the interface with the top structure of Subaru telescope and also accommodates the optical bench in which Cobra fiber positioners and fiducial fibers are located. In addition, the acquisition and guiding cameras (AGCs), the cable wrapper, the fiducial fiber illuminator, and viewer, the field element, and the telemetry system are located inside the PFI. The mechanical structure of the PFI was designed with special care such that its deflections sufficiently match those of the HSC’s Wide Field Corrector (WFC) so the fibers will stay on targets over the course of the observations within the required accuracy. The assembly, integration and verification of PFI was completed in 2021. The performance of PFI meets the requirements and it was delivered to Subaru telescope in June 2021. Consequently, various tests and engineering runs were carried out to calibrate the PFI and verify the performance of the PFI with the telescope.
PFS (Prime Focus Spectrograph), a next generation facility instrument on the Subaru telescope, is now being tested on the telescope. The instrument is equipped with very wide (1.3 degrees in diameter) field of view on the Subaru’s prime focus, high multiplexity by 2394 reconfigurable fibers, and wide waveband spectrograph that covers from 380nm to 1260nm simultaneously in one exposure. Currently engineering observations are ongoing with Prime Focus Instrument (PFI), Metrology Camera System (MCS), the first spectrpgraph module (SM1) with visible cameras and the first fiber cable providing optical link between PFI and SM1. Among the rest of the hardware, the second fiber cable has been already installed on the telescope and in the dome building since April 2022, and the two others were also delivered in June 2022. The integration and test of next SMs including near-infrared cameras are ongoing for timely deliveries. The progress in the software development is also worth noting. The instrument control software delivered with the subsystems is being well integrated with its system-level layer, the telescope system, observation planning software and associated databases. The data reduction pipelines are also rapidly progressing especially since sky spectra started being taken in early 2021 using Subaru Nigh Sky Spectrograph (SuNSS), and more recently using PFI during the engineering observations. In parallel to these instrumentation activities, the PFS science team in the collaboration is timely formulating a plan of large-sky survey observation to be proposed and conducted as a Subaru Strategic Program (SSP) from 2024. In this article, we report these recent progresses, ongoing developments and future perspectives of the PFS instrumentation.
As part of the GRAVITY+ project, the near-infrared beam combiner GRAVITY and the VLTI are currently undergoing a series of significant upgrades to further improve the performance and sky coverage. The instrumental changes will be transformational, and for instance uniquely position GRAVITY to observe the broad line region of hundreds of Active Galactic Nuclei (AGN) at a redshift of two and higher. The increased sky coverage is achieved by enlarging the maximum angular separation between the celestial science object (SC) and the off-axis fringe tracking (FT) star from currently 2 arcseconds (arcsec) up to unprecedented 30 arcsec, limited by the atmospheric conditions. This was successfully demonstrated at the VLTI for the first time.
With the upgrade from GRAVITY to GRAVITY+ the instrument will evolve to an all-sky interferometer that can observe faint targets, such as high redshift AGN. Observing the faintest targets requires reducing the noise sources in GRAVITY as much as possible. The dominant noise source, especially in the blue part of the spectrum, is the backscattering of the metrology laser light onto the detector. To reduce this noise we introduce two new metrology modes. With a combination of small hardware changes and software adaptations, we can dim the metrology laser during the observation without losing the phase referencing. For single beam targets, we can even turn off the metrology laser for the maximum SNR on the detector. These changes lead to a SNR improvement of over a factor of two averaged over the whole spectrum and up to a factor of eight in the part of the spectrum currently dominated by laser noise.
Multi-conjugated adaptive optics (MCAO) is essential for performing astrometry with the Extremely Large Telescope (ELT). Unlike most of the 8-m class telescopes, the ELT will be a fully adaptive telescope, and a significant portion of the adaptive optics (AO) dynamic range will be depleted by the correction and stabilization of the telescope aberrations and instabilities. MCAO systems are of particular interest for ground-based astrometry since they stabilize the low-order field distortions and transient plate scale instabilities, which originate from the telescope and in the instrument. All instruments have several optical elements relatively far away from the pupil that can potentially challenge the astrometric precision of the observations with their residual mid-spatial frequencies errors. Using a combined simulation of ray tracing and AO numerical codes, we assess the impact of these systematic errors at different field-of-view (FoV) scales and fitting scenarios. The distortions have been assessed at different sky position angles (PA) and indicate that over large FoVs only small PA ranges (±1 deg to 3 deg) are accessible with astrometric residuals ≤50 μas. A full compliance with the astrometric requirement, at any PA, is achievable for 2 arc sec2 FoV patches already with a third-order polynomial. The natural partition of the optical system into three segments, i.e., the ELT, the MAORY MCAO module, and the MICADO instrument, resembles a splitting of the astrometric problem into the three subsystems that are characterized by different distortion amplitudes and calibration strategies. The result is a family portrait of the different optical segments with their specifications, dynamic motions, conjugation height, and AO correctability, leading to tracing their role in the bigger puzzle of the 50-μas as astrometric endeavor.
PFS (Prime Focus Spectrograph), a next generation facility instrument on the Subaru telescope, is a very wide- field, massively multiplexed, and optical and near-infrared spectrograph. Exploiting the Subaru prime focus, 2394 reconfigurable fibers will be distributed in the 1.3 degree-diameter field of view. The spectrograph system has been designed with 3 arms of blue, red, and near-infrared cameras to simultaneously deliver spectra from 380nm to 1260nm in one exposure. The instrumentation has been conducted by the international collaboration managed by the project office hosted by Kavli IPMU. The team is actively integrating and testing the hardware and software of the subsystems some of which such as Metrology Camera System, the first Spectrograph Module, and the first on-telescope fiber cable have been delivered to the Subaru telescope observatory at the summit of Maunakea since 2018. The development is progressing in order to start on-sky engineering observation in 2021, and science operation in 2023. In parallel, the collaboration is trying to timely develop a plan of large-sky survey observation to be proposed and conducted in the framework of Subaru Strategic Program (SSP). This article gives an overview of the recent progress, current status and future perspectives of the instrumentation and scientific operation.
The Prime Focus
Spectrograph (PFS) survey will target the same patch of sky from several dozens
to 100 times. The problem of allocating PFS' 2394 fibers to objects over many
visits of a field is a highly non-trivial optimization problem. Our network
flow approach models the fiber allocation as a generalized network
min-cost/max-flow problem.
This methodology is inspired by SDSS, but extends this to address the
variety of requirements of the the PFS survey. Ultimately, we
solve the network flow through linear programming. This generally provides
a very good solution in reasonable amounts of time and can give a clear
quantitative measure of just “how good it is”. It allows us to define an arbitrary number of target classes with different
weights, to enforce constraints on the target distribution,
and to put caps to the number of observed objects per class.
We will present the methodology and the implementation of our approach.
Frequency combs are an ideal light source to calibrate high resolution spectrographs. For lower resolution spectrographs such as typically used for extragalactic science, combs are not readily available. The mode spacing of combs is too narrow to be resolved at resolutions of a few 1000s and below, and actual comb systems are complex and consequently still very costly. The uneven spacing, non-ideal distribution over the wavelength range, and large dynamic range of line intensities of classical natural emission line sources limit the precision to which low to medium resolution instruments can be calibrated. Fiber Fabry Perot etalons do due not offer the same absolute stability as an actual frequency comb. It has been shown however that, when cross calibrated against a classic source, they pose a viable alternative. We will explore the first application of such a system in the optical with the R ~ 10000 optical Integral Field Unit spectrograph VIRUS-W at the McDonald observatory.
MCAO is essential to perform astrometry with the Extremely Large Telescope (ELT). Differently from the 8m class telescopes, the ELT will be a fully adaptive telescope, and a significant portion of the Adaptive Optics (AO) dynamic range will be absorbed by the correction and stabilization of the telescope aberrations and instabilities. Of particular interest for the ground-based astrometry is the use of Multi-Conjugated AO systems that allow to stabilize the low order field distortions against the transient plate scale instabilities of different origin occurring at the telescope and in the instrument. The instruments have several optical elements relatively far away from the pupil that can potentially challenge the astrometric precision of the observations with their residual mid-spatial frequencies errors. Using a combined simulation of ray tracing and AO numerical codes we assess the impact of these systematic errors at different field of view scales and fitting scenarios. The distortions have been assessed at different sky Position Angles (PA) and indicate that over large field of views only small PA ranges (±1°-3°) are accessible with astrometric residuals 50 µas. A full compliance, at any PA is achievable for 2 arcsec2 FoV patches already with a 3rd order polynomial. The natural partition of the optical system in three segments, ELT-MAORY-MICADO, respectively telescope, MCAO module and instrument, resembles also a splitting of the astrometric problem in the three subsystems that are characterized by different distortion amplitudes and calibration strategies. The result is a family portrait of the different optical segments with their prescription, dynamic motions, conjugation height and AO correctability, leading to trace their role in the bigger puzzle of the 50 μas astrometric endeavor.
The Wendelstein 2 m Telescope has been in regular science operation since 2013. It is equipped with a three channel camera and an Echelle spectrograph called FOCES on one of it’s two Nasmyth foci. FOCES is a wavelength comb stabilized instrument which aims at <1m/s precision. High stability and repeatability of the entire system, including its fiber feed, are required and fast exchange times, between imaging mode and radial velocity measurement, is desirable. We are in the advanced implementation phase of an automated multifocal exchange system to allow for stable and fast exchange between the three different science instruments, a wavefront sensor and a calibration system. We present the final optical design and discuss the mechanical design choices we made in particular with respect to the limited design volume. We will conclude with presenting results from first tests on the system’s optomechanical stability.
MICADO will enable the ELT to perform diffraction limited near-infrared observations at first light. The instrument’s capabilities focus on imaging (including astrometric and high contrast) as well as single object spectroscopy. This contribution looks at how requirements from the observing modes have driven the instrument design and functionality. Using examples from specific science cases, and making use of the data simulation tool, an outline is presented of what we can expect the instrument to achieve.
PFS (Prime Focus Spectrograph), a next generation facility instrument on the 8.2-meter Subaru Telescope, is a very wide-field, massively multiplexed, optical and near-infrared spectrograph. Exploiting the Subaru prime focus, 2394 reconfigurable fibers will be distributed over the 1.3 deg field of view. The spectrograph has been designed with 3 arms of blue, red, and near-infrared cameras to simultaneously observe spectra from 380nm to 1260nm in one exposure at a resolution of ~ 1.6-2.7Å. An international collaboration is developing this instrument under the initiative of Kavli IPMU. The project recently started undertaking the commissioning process of a subsystem at the Subaru Telescope side, with the integration and test processes of the other subsystems ongoing in parallel. We are aiming to start engineering night-sky operations in 2019, and observations for scientific use in 2021. This article gives an overview of the instrument, current project status and future paths forward.
The paper describes the preliminary design of the MICADO calibration assembly. MICADO, the Multi-AO Imaging CAmera for Deep Observations, is targeted to be one of the first light instruments of the Extremely Large Telescope (ELT) and it will embrace imaging, spectroscopic and astrometric capabilities including their calibration. The astrometric requirements are particularly ambitious aiming for ~ 50 μas differential precision within and between single epochs. The MICADO Calibration Assembly (MCA) shall deliver flat-field, wavelength and astrometric calibration and it will support the instrument alignment to the Single-Conjugate Adaptive Optics wavefront sensor. After a complete overview of the MCA subsystems, their functionalities, design and status, we will concentrate on the ongoing prototype testing of the most challenging components. Particular emphasis is put on the development and test of the Warm Astrometric Mask (WAM) for the calibration of the optical distortions within MICADO and MAORY, the multiconjugate AO module.
We report on our ongoing efforts to ensure that the MICADO NIR imager reaches differential absolute (often abbreviated: relative) astrometric performance limited by the SNR of typical observations. The exceptional 39m diameter collecting area in combination with a powerful multi-conjugate adaptive optics system (called MAORY) brings the nominal centroiding error, which scales as FWHM/SNR, down to a few 10 μas. Here we show that an exceptional effort is needed to provide a system which delivers adequate and calibrateable astrometric performance over the full field of view (up to 53 arcsec diameter).
The Visible Integral-field Replicable Unit Spectrograph (VIRUS) consists of 156 identical spectrographs (arrayed as 78 pairs, each with a pair of spectrographs) fed by 35,000 fibers, each 1.5 arcsec diameter, at the focus of the upgraded 10 m Hobby-Eberly Telescope (HET). VIRUS has a fixed bandpass of 350-550 nm and resolving power R~750. The fibers are grouped into 78 integral field units, each with 448 fibers and 20 m average length. VIRUS is the first example of large-scale replication applied to optical astronomy and is capable of surveying large areas of sky, spectrally. The VIRUS concept offers significant savings of engineering effort and cost when compared to traditional instruments. The main motivator for VIRUS is to map the evolution of dark energy for the Hobby-Eberly Telescope Dark Energy Experiment (HETDEX), using 0.8M Lyman-alpha emitting galaxies as tracers. The VIRUS array has been undergoing staged deployment starting in late 2015. Currently, more than half of the array has been populated and the HETDEX survey started in 2017 December. It will provide a powerful new facility instrument for the HET, well suited to the survey niche of the telescope, and will open up large spectroscopic surveys of the emission line universe for the first time. We will review the current state of production, lessons learned in sustaining volume production, characterization, deployment, and commissioning of this massive instrument.
The Visible Integral-field Replicable Unit Spectrograph (VIRUS) consists of 156 identical spectrographs (arrayed as 78 pairs) fed by 35,000 fibers, each 1.5 arcsec diameter, at the focus of the upgraded 10 m Hobby-Eberly Telescope (HET). VIRUS has a fixed bandpass of 350-550 nm and resolving power R~700. VIRUS is the first example of industrial-scale replication applied to optical astronomy and is capable of surveying large areas of sky, spectrally. The VIRUS concept offers significant savings of engineering effort, cost, and schedule when compared to traditional instruments. The main motivator for VIRUS is to map the evolution of dark energy for the Hobby-Eberly Telescope Dark Energy Experiment (HETDEX‡), using 0.8M Lyman-alpha emitting galaxies as tracers. The VIRUS array is undergoing staged deployment during 2016 and 2017. It will provide a powerful new facility instrument for the HET, well suited to the survey niche of the telescope, and will open up large spectroscopic surveys of the emission line universe for the first time. We will review the production, lessons learned in reaching volume production, characterization, and first deployment of this massive instrument.
In 2014 and 2015 the Multi-Object InfraRed Camera and Spectrograph (MOIRCS) instrument at the Subaru Telescope on Maunakea is underwent a significant modernization and upgrade project. We upgraded the two Hawaii2 detectors to Hawaii2-RG models, modernized the cryogenic temperature control system, and rewrote much of the instrument control software. The detector upgrade replaced the Hawaii2 detectors which use the Tohoku University Focal Plane Array Controller (TUFPAC) electronics with Hawaii2-RG detectors using SIDECAR ASIC (a fully integrated FPA controller system-on-a-chip) and a SAM interface card. We achieved an improvement in read noise by a factor of about 2 with this detector and electronics upgrade. The cryogenic temperature control upgrade focused on modernizing the components and making the procedures for warm up and cool down of the instrument safer. We have moved PID control loops out of the instrument control software and into Lakeshore model 336 cryogenic temperature controllers and have added interlocks on the warming systems to prevent overheating of the instrument. Much of the instrument control software has also been re-written. This was necessitated by the different interface to the detector electronics (ASIC and SAM vs. TUFPAC) and by the desire to modernize the interface to the telescope control software which has been updated to Subaru's "Gen2" system since the time of MOIRCS construction and first light. The new software is also designed to increase reliability of operation of the instrument, decrease overheads, and be easier for night time operators and support astronomers to use.
During the past year, the Multi-Object InfraRed Camera and Spectrograph at Subaru has undergone an upgrade of its science detectors, the housekeeping electronics and the instrument control software. This overhaul aims at increasing MOIRCS' sensitivity, observing efficiency and stability. Here we present the installation and the alignment procedure of the two Hawaii 2RG detectors and the design of a cryogenic focus mechanism. The new detectors show significantly lower read noise, increased quantum efficiency, and lower the readout time.
PFS (Prime Focus Spectrograph), a next generation facility instrument on the 8.2-meter Subaru Telescope, is a very wide-field, massively multiplexed, optical and near-infrared spectrograph. Exploiting the Subaru prime focus, 2394 reconfigurable fibers will be distributed over the 1.3 deg field of view. The spectrograph has been designed with 3 arms of blue, red, and near-infrared cameras to simultaneously observe spectra from 380nm to 1260nm in one exposure at a resolution of ~1.6 - 2.7Å. An international collaboration is developing this instrument under the initiative of Kavli IPMU. The project is now going into the construction phase aiming at undertaking system integration in 2017-2018 and subsequently carrying out engineering operations in 2018-2019. This article gives an overview of the instrument, current project status and future paths forward.
VIRUS is a massively replicated spectrograph built for HETDEX, the Hobby Eberly Telescope Dark Energy Experiment. It consists of 156 channels within 78 units fed by 34944 fibers over the 22 arcminute field of the upgraded HET. VIRUS covers a relatively narrow bandpass (350-550nm) at low resolution (R ~ 700) to target the emission of Lyman-alpha emitters (LAEs) for HETDEX. VIRUS is a first demonstration of industrial style assembly line replication in optical astronomy. Installation and testing of VIRUS units began in November of 2015. This winter we celebrated the first on sky instrument activity of the upgraded HET, using a VIRUS unit and LRS2-R (the upgraded facility Low Resolution Spectrograph for the HET). Here we describe progress in VIRUS installation and commissioning through June 2016. We include early sky data obtained to characterize spectrograph performance and on sky performance of the newly upgraded HET. As part of the instrumentation for first science light at the HET, the IFU fed spectrographs were used to test a full range of telescope system functionality including the field calibration unit (FCU).We also use placement of strategic IFUs to map the new HET field to the fiber placement, and demonstrate actuation of the dithering mechanism key to HETDEX observations.
VIRUS is the massively replicated fiber-fed spectrograph being built for the Hobby-Eberly Telescope to support
HETDEX (the Hobby-Eberly Telescope Dark Energy Experiment). The instrument consists of 156 identical
channels, fed by 34,944 fibers contained in 78 integral field units, deployed in the 22 arcminute field of the
upgraded HET. VIRUS covers 350-550nm at R ≈ 700 and is built to target Lyman α emitters at 1.9 < z < 3.5 to
measure the evolution of dark energy. Here we present the assembly line construction of the VIRUS spectrographs,
including their alignment and plans for characterization. We briefly discuss plans for installation on the telescope.
The spectrographs are being installed on the HET in several stages, and the instrument is due for completion
by the end of 2014.
VIRUS is the visible, integral-field replicable unit spectrograph for the Hobby-Eberly-Telescope (HET) consisting of 75
integral-field-units that feed 150 spectrographs. The full VIRUS instrument features over 33,000 fibres, each projecting
to 1.5 arcseconds diameter on sky, deployed at the prime focus of the upgraded 10m HET. The assembly and acceptance
testing for all IFUs includes microscopic surface quality inspections, astrometry of fibre positions, relative throughput
measurements, focal-ratio-degradation evaluation, and system acceptance using a VIRUS reference spectrograph to
verify the image quality, spectral transmission, stability, or to detect any stray light issues.
The Visible Integral-field Replicable Unit Spectrograph (VIRUS) consists of a baseline build of 150 identical
spectrographs (arrayed as 75 unit pairs) fed by 33,600 fibers, each 1.5 arcsec diameter, at the focus of the upgraded 10
m Hobby-Eberly Telescope (HET). VIRUS has a fixed bandpass of 350-550 nm and resolving power R~700. VIRUS is
the first example of industrial-scale replication applied to optical astronomy and is capable of surveying large areas of
sky, spectrally. The VIRUS concept offers significant savings of engineering effort, cost, and schedule when compared
to traditional instruments.
The main motivator for VIRUS is to map the evolution of dark energy for the Hobby-Eberly Telescope Dark Energy
Experiment (HETDEX), using 0.8M Lyman-α emitting galaxies as tracers. The full VIRUS array is due to be deployed starting at the end of 2014 and will provide a powerful new facility instrument for the HET, well suited to the
survey niche of the telescope, and will open up large area surveys of the emission line universe for the first time.
VIRUS is in full production, and we are about half way through. We review the production design, lessons learned in
reaching volume production, and preparation for deployment of this massive instrument. We also discuss the application
of the replicated spectrograph concept to next generation instrumentation on ELTs.
Ludwig-Maximilians-Universitat Munchen operates an astrophysical observatory on the summit of Mt. Wendelstein 1 which has been equipped with a modern 2m-class telescope.2-4 The new Fraunhofer telescope is designed to sustain the excellent (< 0:8" median) seeing of the site [1, Fig. 1] over a FoV of 0:2 deg2 utilizing a camera built around a customized 64 MPixel Mosaic (Spectral Instruments, 4 × (4k)2 15μm e2v CCDs). The Wendelstein Wide Field Imager5 had its commissioning in the lab in the course of the last few months and now waits to see first light on sky in the near future, i.e. when telescope commissioning allows to test science instruments.
In November and December 2010 we successfully commissioned a new optical fibre-based Integral Field Unit
(IFU) spectrograph at the 2.7m Harlan J. Smith Telescope of the McDonald Observatory in Texas. Regular science observations commenced in spring 2011. The instrument achieves a spectral resolution of λ/Δλ = 8700 with a spectral coverage of 4850Å – 5480Å and a spectacular throughput of 37% including the telescope optics.
The design is related to the VIRUS-P instrument that was developed for the HETDEX experiment, but was modified significantly in order to achieve the large spectral resolution that is needed to recover the dynamical properties of disk galaxies. In addition to the high resolution mode, VIRUS-W offers a stellar population mode with a resolution of λ/Δλ = 3300 and a spectral coverage of 4340Å – 6040Å. The IFU is comprised out of 267
150 μm-core optical fibers with a fill factor of 1/3. With a beam of f/3.65, the core diameter translates to 3.2" on sky and a large field of view of 105" x 55" that is ideally suited to study the bulge regions of local spiral galaxies. The large throughput is due to a design that operates close to the numerical aperture of the fibers, a
large 200mm aperture refractive camera with no central obscuration, highly efficient volume phase holographic gratings, and a high-QE CCD. We will discuss the design, the performance and briefly present an example for the very up-to-date science that is possible with such instruments at 2m class telescopes.
The Hobby-Eberly Telescope Dark Energy Experiment (HETDEX) is a blind spectroscopic survey to map the
evolution of dark energy using Lyman-alpha emitting galaxies at redshifts 1:9 < z < 3:5 as tracers. The survey
instrument, VIRUS, consists of 75 IFUs distributed across the 22-arcmin field of the upgraded 9.2-m HET. Each
exposure gathers 33,600 spectra. Over the projected five year run of the survey we expect about 170 GB of data
per night. For the data reduction we developed the Cure pipeline. Cure is designed to automatically find and
calibrate the observed spectra, subtract the sky background, and detect and classify different types of sources.
Cure employs rigorous statistical methods and complete pixel-level error propagation throughout the reduction
process to ensure Poisson-limited performance and meaningful significance values. To automate the reduction of
the whole dataset we implemented the Cure pipeline in the Astro-WISE framework. This integration provides
for HETDEX a database backend with complete dependency tracking of the various reduction steps, automated
checks, and a searchable interface to the detected sources and user management. It can be used to create various
web interfaces for data access and quality control. Astro-WISE allows us to reduce the data from all the IFUs in
parallel on a compute cluster. This cluster allows us to reduce the observed data in quasi real time and still have
excess capacity for rerunning parts of the reduction. Finally, the Astro-WISE interface will be used to provide
access to reduced data products to the general community.
The Visible Integral-field Replicable Unit Spectrograph (VIRUS) consists of a baseline build of 150 identical
spectrographs (arrayed as 75 units, each with a pair of spectrographs) fed by 33,600 fibers, each 1.5 arcsec diameter,
deployed over the 22 arcminute field of the upgraded 10 m Hobby-Eberly Telescope (HET). The goal is to deploy 82
units. VIRUS has a fixed bandpass of 350-550 nm and resolving power R~700. VIRUS is the first example of
industrial-scale replication applied to optical astronomy and is capable of spectral surveys of large areas of sky. This
approach, in which a relatively simple, inexpensive, unit spectrograph is copied in large numbers, offers significant
savings of engineering effort, cost, and schedule when compared to traditional instruments.
The main motivator for VIRUS is to map the evolution of dark energy for the Hobby-Eberly Telescope Dark Energy
Experiment (HETDEX) using 0.8M Lyman-α emitting galaxies as tracers. The full VIRUS array is due to be deployed
by early 2014 and will provide a powerful new facility instrument for the HET, well suited to the survey niche of the
telescope. VIRUS and HET will open up wide-field surveys of the emission-line universe for the first time. We present
the production design and current status of VIRUS.
The Ludwig-Maximilians-Universit¨at M¨unchen operates an astrophysical observatory on the summit of Mt.
Wendelstein1 which will be equipped with a modern 2m-class, robotic telescope.2 One Nasmyth port of the new
Fraunhofer telescope is designed to deliver the excellent (< 0.8" median) seeing of the site [1, Fig. 1] for a smaller
FoV of 60 arcmin2 without any corrector optics at optical and NIR wavebands. Thus, it will be optimized for
fast multi-wavelength follow-up observations of targets of opportunities (e.g. Gamma-Ray-bursts) or efficient
photometric redshift determinations of huge numbers of galaxy clusters identified in optical (PanSTARRS), SZ
(Planck) or X-ray (eROSITA) surveys. We present the design of a compact 3 channel camera which serves these
science requirements, built partly from commercially available Fairchild-2k optical CCD3 cameras (Apogee),
coupled with small Bonn Shutters,4 and mounted on commercial high precision linear stages for differential
focusing. A specially designed beam-splitter system maintains the high optical quality. The NIR camera is built
in cooperation with the Institute for Astronomy in Hawaii. The combined operation of this camera with two
spectrographs at the same telescope port has already been presented at SPIE 2008.5
We present the design, layout and performance estimates for a fiber based Integral Field Unit spectrograph.
This instrument is built for flexible use at different telescopes, and in particular for the new 2m telescope on
Mount Wendelstein in the Bavarian Alps. Based on the VIRUS spectrograph for the HETDEX experiment,
the proposed instrument will have a fiber head consisting of 267 optical fibers. The large angular field of
view of 150×75 arcseconds will allow full coverage of the bulge regions of most local late type galaxies in one
or two pointings. Realized by the usage of VPH gratings, a R ≈ 2500 and a R ≈ 6800 mode with 850Å and
515Å wavelength coverage will be dedicated to the study of stellar populations and kinematics of late type
galaxy bulges.
We describe charge-coupled device (CCD) development activities at the Lawrence Berkeley National Laboratory (LBNL). Back-illuminated CCDs fabricated on 200-300 μm thick, fully depleted, high-resistivity silicon substrates are produced in partnership with a commercial CCD foundry. The CCDs are fully depleted by the application of a substrate bias voltage. Spatial resolution considerations require operation of thick, fully depleted CCDs at high substrate bias voltages. We have developed CCDs that are compatible with substrate bias voltages of at least 200V. This improves spatial resolution for a given thickness, and allows for full depletion of thicker CCDs than previously considered. We have demonstrated full depletion of 650-675 μm thick CCDs, with potential applications in direct x-ray detection. In this work we discuss the issues related to high-voltage operation of fully depleted CCDs, as well as experimental results on high-voltage-compatible CCDs.
The usual QE measurement heavily relies on a calibrated photodiode (PD) and the knowledge of the CCD's gain. Either can introduce significant systematic errors. But 1-R ≥QE, where R is the reflectivity. Over a significant wavelength range, 1-R = QE. An unconventional reflectometer has been developed to make this measurement. R is measured in two steps, using light from the lateral monochromator port via an optical fiber. The beam intensity is measured directly with a PD, then both the PD and CCD are moved so that the optical path length is unchanged and the light reflects once from the CCD; the PD current ratio is R. Unlike the traditional VW scheme this approach makes only one reflection from the CCD surface. Since the reflectivity of the LBNL CCDs might be as low as 2% this increases the signal to noise ratio dramatically. The goal is a 1% accuracy. We obtain good agreement between 1 - R and the direct QE results.
Instrumentation was developed in 2004 and 2005 to measure the quantum efficiency of the Lawrence Berkeley National Lab (LBNL) total-depletion CCD's, intended for astronomy and space applications. This paper describes the basic instrument. Although it is conventional even to the parts list, there are important innovations. A xenon arc light source was chosen for its high blue/UV and low red/IR output as compared with a tungsten light. Intensity stabilization has been difficult, but since only flux ratios matter this is not critical. Between the light source and an Oriel MS257 monochromator are a shutter and two filter wheels. High-bandpass and low-bandpass filter pairs isolate the 150-nm wide bands appropriate to the wavelength, thus minimizing scattered light and providing order blocking. Light from the auxiliary port enters a 20-inch optical sphere, and the 4-inch output port is at right angles to the input port. An 80 cm drift space produces near-uniform illumination on the CCD. Next to the cold CCD inside the horizontal dewar is a calibrated reference photodiode which is regulated to the PD calibration temperature, 25° C. The ratio of the CCD and in-dewar reference PD signals provides the QE measurement. Additional cross-calibration to a PD on the integrating sphere permits lower-intensity exposures.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.