KEYWORDS: Polarization, Digital signal processing, Modulation, Phase shift keying, Transceivers, Detection and tracking algorithms, Clocks, Receivers, Error analysis, Algorithm development
The need for software-defined transmissions raises new challenges for the transceiver design: multiple modulation formats have to be supported to accommodate for varying bandwidth demand and physical characteristics of different optical paths. In order to keep the receiver complexity and cost low, most of the digital signal processing functionalities should be shared by the different formats.
In this paper we address the problems of carrier frequency and phase recovery as well as the tracking of fast polarization rotations for arbitrary constellations in two or four dimensions. We first report how not only carrier frequency recovery but also ADC sampling error correction can be performed using a modulation-format independent frequency-domain approach. We then report a framework where the combined impact of phase error and fast polarization rotation can be described by a rotation in a four-dimensional space and show how to efficiently estimate and compensate this rotation. We finally investigate the dynamic performance of the reported algorithms for polarization-switched QPSK and 4D 32QAM constellations using numerical simulations.
KEYWORDS: Birefringence, Monte Carlo methods, Wavelength division multiplexing, Polarization, Receivers, Computer simulations, Numerical simulations, Modulation, Optical filters, Digital signal processing
We detail a methodology to avoid pitfalls while investigating the upgrade of legacy 10G transmission systems with 40G
DP-BPSK or 100G DP-QPSK channels using numerical simulation. Techniques for efficient and accurate estimation of
intra- and inter-channel nonlinear effects are discussed.
KEYWORDS: Polarization, Modulation, Phase shift keying, Optical spheres, Dispersion, Signal attenuation, Digital signal processing, Signal detection, Interference (communication), Telecommunications
We show how to estimate accurately the Jones matrix of the transmission line by analyzing the Stokes vectors of DP-QPSK
signals. This method can be used to perform in-situ PMD measurement in dual-polarization QPSK systems, and
in addition to the constant modulus algorithm (CMA) to mitigate polarization-induced impairments. The applicability of
this method to other modulation formats is discussed.
Requirements on photonics modeling vary significantly when aiming to design, analyze and optimize a single device, a
complete transmission link or a complex network. Depending on the task at hand, different levels of detail for emulating
the underlying physical characteristics and signal interactions are necessary. We present a multi-layer photonics
modeling framework that addresses the different design challenges of devices, links and networks. Our discussed
methodology is based on flexible optical signal representations, equipment models ranging from very detailed to high-level
parametric, sophisticated numerical algorithms and means for automated parameter and technology variation and
optimization. We discuss applications such as the detailed modeling on photonics integrated circuit level, the
characterization of a high-speed transmission link utilizing multilevel modulation and coherent detection, the parametric
analysis of transmission links and network dynamics, and the cost-optimized placement of equipment in moderately
complex networks.
We review existing BER estimation methods and propose alternative methods to assess
the performance of multilevel modulation formats with both direct and coherent detection. The
impact of digital signal processing (DSP) on the BER estimation procedure is discussed for the
latter case. The different approaches are illustrated by simulating exemplary transmission systems.
KEYWORDS: Polarization, Digital signal processing, Systems modeling, Modulation, Receivers, Electro optical modeling, Orthogonal frequency division multiplexing, Signal detection, Modulators, Monte Carlo methods
Key issues related to the modeling of ultra-high speed transmission are discussed in this paper. These topics include
components modeling, link modeling and BER estimation. Different solutions for the transport of 100 Gb/s over a single
wavelength including technologies such as coherent detection, polarization multiplexing, optical OFDM, and digital
signal processing are reviewed and compared with means of numerical simulations.
The concept of a nonlinear transfer function of a fibre-optic communication link is reviewed. Also an approximation of the nonlinear transfer function is introduced, which allows to define an equivalent single-span model of a dispersion-managed multi-span system. In this paper we will show its limits of validity and try to extent these limits by enhancing the theoretical model. In this respect we will discuss the impact of dispersion precompensation and show the influence of residual dispersion per span, number of spans and local dispersion on transmission systems with on-off keying and differential phase-shift keying modulation formats. This approach allows fast assessment of the performance of a given modulation format over various dispersion maps by reducing the need for extensive numerical simulations.
In this paper, the concept of the nonlinear diffusion bandwidth of a fiber is introduced. This simple criterion enables the characterization of nonlinear impairments in single-span transmission systems. Furthermore it is shown how to extend this criterion to multi-span dispersion-managed transmission systems. This enables to easily predict the performance of a given modulation format over various transmission lines with different fiber chromatic dispersion and dispersion maps.
In order to efficiently use the available optical bandwidth efforts are under way to achieve spectral efficiencies of at least 0.8 bits/s/Hz. For such spectrally efficient systems (considering co-polarized WDM-channels) the importance of filtering for different modulation formats, different channel bitrates from 10 - 160 Gbit/s and different dispersion map designs will be discussed. It turns out that the optimisation strategy for spectrally efficient WDM systems shows considerable differences to single channel systems. The specific modulation format and the chosen channel bitrate turn out to be of minor importance, thus enabling simple analytic expressions for the achievable system performance.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.