KEYWORDS: Optical simulations, Holography, Near field, Telescopes, Sensors, Near field optics, Optical testing, Signal detection, Beam analyzers, Staring arrays
The Simons Observatory is a ground-based telescope array located at an elevation of 5200 meters, in the Atacama Desert in Chile, designed to measure the temperature and polarization of the cosmic microwave background. It comprises four telescopes: three 0.42-meter small aperture telescopes (SATs), focused on searching for primordial gravitational waves, and one 6-meter large aperture telescope, focused on studying small-scale perturbations. Each of the SATs will field over 12,000 TES bolometers, with two SATs sensitive to both 90 and 150GHz frequency bands (SAT-MF1, and SAT-MF2), while the third SAT is sensitive to 220 and 280GHz frequency bands. Prior to its deployment in 2023, the optical properties of SAT-MF1 were characterized in the laboratory. We report here on measurements of beam maps acquired using a thermal source on SAT-MF1, along with measurements of near-field beam maps using a holographic method that enables characterization of both the amplitude and phase of the beam response, yielding an estimate of the far-field radiation pattern received by the telescope. We find that the near-field half-width-half-maximum (HWHM) requirements are met across the focal plane array for the 90GHz frequency band, and through most of the focal plane array for the 150GHz frequency band. Namely, the mean of the bandpass averaged HWHM of the edge-detector universal focal plane modules match the simulated HWHM to 10.4%, with the discrepancy caused by fringing in the simulation. The measured radial profile of the beams matches simulations to within 2dB from the beam center to at least the -10dB level. Holography estimates of the far-field 90GHz beams match the full-width-half-maximum from simulation within 1%, and the beam radial profiles deviate by less than 2dB inside the central lobe. The success of the holography and thermal beam map experiments confirmed the optical performance were sufficient to meet the science requirements. SAT-MF1 was deployed to Chile in June, 2023. On-site observations are currently underway.
We present the conceptual design of the modular detector and readout system for the Cosmic Microwave Background – Stage four (CMB-S4) ground-based survey experiment. CMB-S4 will map the cosmic microwave background (CMB) and the millimeter-wave sky to unprecedented sensitivity, using 500,000 superconducting detectors observing from Chile and Antarctica to map over 60% of the sky. The fundamental building block of the detector and readout system is a detector module package operated at 100 mK, which is connected to a readout and amplification chain that carries signals out to room temperature. It uses arrays of feedhorn-coupled orthomode transducers (OMT) that collect optical power from the sky onto dc-voltage-biased transition-edge sensor (TES) bolometers. The resulting current signal in the TESs is then amplified by a two-stage cryogenic Superconducting Quantum Interference Device (SQUID) system with a time-division multiplexer to reduce wire count, and matching room-temperature electronics to condition and transmit signals to the data acquisition system. Sensitivity and systematics requirements are being developed for the detector and readout system over wide range of observing bands (20 to 300 GHz) and optical powers to accomplish CMB-S4’s science goals. While the design incorporates the successes of previous generations of CMB instruments, CMB-S4 requires an order of magnitude more detectors than any prior experiment. This requires fabrication of complex superconducting circuits on over 10 m2 of silicon, as well as significant amounts of precision wiring, assembly and cryogenic testing
This conference presentation was prepared for the Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XI conference at SPIE Astronomical Telescopes + Instrumentation, 2022.
This conference presentation was prepared for the Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XI conference at SPIE Astronomical Telescopes + Instrumentation, 2022.
This conference presentation was prepared for the Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XI conference at SPIE Astronomical Telescopes + Instrumentation, 2022.
KEYWORDS: Telescopes, Receivers, Observatories, Holography, Near field, Diffraction, Systems modeling, Statistical analysis, Radio propagation, Particles
This conference presentation was prepared for the Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XI conference at SPIE Astronomical Telescopes + Instrumentation, 2022.
The Simons Observatory (SO) will be a CMB survey experiment with three small-aperture telescopes and one large-aperture telescope (the LAT), which will observe from the Atacama Desert in Chile. In total, SO will field over 60,000 TES bolometers in six spectral bands centered between 27 and 280 GHz. The 6 m LAT, targeting the smaller angular scales of the CMB, utilizes a cryogenic receiver (LATR) designed to house up to 13 individual optics tubes. The scientific objectives of the SO project requires these optics tubes to achieve high-throughput optical performance while maintaining exquisite control of systematic effects. We describe the integration and testing program for the LATR optics tubes being carried out to verify the design and assembly of the tubes before deployment. The program includes a quick turn-around single tube test cryostat. We discuss the optical design specifications the tubes for deployment and the suite of optical test equipment prepared for these measurements.
The Simons Observatory (SO) will be a cosmic microwave background (CMB) survey experiment with three small-aperture telescopes and one large-aperture telescope, which will observe from the Atacama Desert in Chile. In total, SO will field over 60,000 transition-edge sensor (TES) bolometers in six spectral bands centered between 27 and 280 GHz in order to achieve the sensitivity necessary to measure or constrain numerous cosmological quantities, as outlined in The Simons Observatory Collaboration et al. (2019). These telescopes require 33 highly transparent, large aperture, refracting optics. To this end, we developed mechanically robust, highly efficient, metamaterial anti-reflection (AR) coatings with octave bandwidth coverage for silicon optics up to 46 cm in diameter for the 22-55, 75-165, and 190-310 GHz bands. We detail the design, the manufacturing approach to fabricate the SO lenses, their performance, and possible extensions of metamaterial AR coatings to optical elements made of harder materials such as alumina.
The Simons Observatory (SO) will make precision temperature and polarization measurements of the cosmic
microwave background (CMB) using a series of telescopes which will cover angular scales between 1 arcminute
and tens of degrees, contain over 40,000 detectors, and sample frequencies between 27 and 270 GHz. SO will
consist of a six-meter-aperture telescope coupled to over 20,000 detectors along with an array of half-meter
aperture refractive cameras, coupled to an additional 20,000+ detectors. The unique combination of large and
small apertures in a single CMB observatory, which will be located in the Atacama Desert at an altitude of
5190 m, will allow us to sample a wide range of angular scales over a common survey area. SO will measure
fundamental cosmological parameters of our universe, find high redshift clusters via the Sunyaev-Zeldovich effect,
constrain properties of neutrinos, and seek signatures of dark matter through gravitational lensing. The complex
set of technical and science requirements for this experiment has led to innovative instrumentation solutions
which we will discuss. The large aperture telescope will couple to a cryogenic receiver that is 2.4 m in diameter
and over 2 m long, creating a number of interesting technical challenges. Concurrently, we are designing an array
of half-meter-aperture cryogenic cameras which also have compelling design challenges. We will give an overview
of the drivers for and designs of the SO telescopes and the cryogenic cameras that will house the cold optical
components and detector arrays.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.