A 1280x1024 Readout Integrated Circuit (ROIC) with 15 μm pixel pitch for MWIR and LWIR applications is designed in 0.18 μm CMOS process. Integrate-Then-Read (ITR) and Integrate-While-Read (IWR) configurations are supported in snapshot mode. The ROIC pixel topology is direct injection (DI) with 3-bit programmable pixel gain. The minimum charge capacity is 0.8 Mé and the maximum full-well-capacity (FWC) is more than 13.2 Mé in ITR mode. 2, 4, 8, and 16 analog video output modes are also supported with a maximum frame rate of 240 fps at 16-output mode. A digital serial interface is used to program timing registers and analog biases. Integration time is programmable with 0.1 μs resolution up to 429 second using 10 MHz clock frequency. The pixel supports binning, windowing and anti-blooming functions. Digital and analog blocks of the ROIC operates using 1.8V and 3.3V supplies. The power consumption is less than 175 mW in 4-output mode of operation at 30 fps.
A 10μm pixel pitch 1280×1024 Readout Integrated Circuit (ROIC) for MWIR applications is designed and fabricated using 0.18 μm CMOS process. It operates in snapshot mode supporting both Integrate-Then-Read (ITR) and IntegratedWhile-Read (IWR) configurations. The ROIC pixel has direct injection (DI) input stage and provides 2-bit programmable pixel gain. It has a minimum charge capacity of 0.7 Mé and a maximum full-well-capacity (FWC) of more than 6.3 Mé in ITR mode. 4, 8 and 16 analog video output modes are also supported with a maximum frame rate of 120 fps at 16-output mode. All digital timing and analog biasing are programmable through a serial interface. Integration time is programmable with 0.1 μs resolution by internal timing circuitry. It supports binning, windowing and antiblooming functions. The ROIC operates with 3.3 V and 1.8 V supplies and dissipates less than 175 mW in 4-output mode of operation at 30 fps. An Analog-Front-End (AFE) card is designed to operate the ROIC and convert analog video outputs into 14-bit digital value. Digitized video data is further processed by 1-point and 2-point Non-Uniformity Correction (NUC), histogram equalization and bad pixel replacement algorithms. The ROIC has been tested with a prototype FPA at 77K. Measurement results of ASEL128010 indicate that it is functional at all operating modes including windowing and binning. The input referred noise level of the ROIC is 877 é at 6.3 Mé FWC.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.