The fiber-fed High Resolution Spectrograph of the Chinese Xinglong 2.16-m Telescope is the main instrument for high precision spectral detection in China. In order to improve the observation performance, a wavelength calibrator based on Fabry-P´erot etalon (FPE) is developed. Here, we report on the design, transmission charac-teristics and vacuum-thermostatic performance of the system. To meet the requirements of the calibration, the calibrator is custom-designed with the FPE gap of 5 mm, fineness value of 40, and illuminating fiber of 100 μm in diameter, which could generate calibration lines with 30 GHz in lines space and covering 500 – 700 nm.
"A joint project has been proposed by the Chinese and Spanish astronomy communities, to develop a high-resolution, ultra- stable spectrograph for the Gran Telescopio Canarias (GTC) at La Palma. Being expected to conduct precise radial velocity (PRV) measurement with extreme precision of up to 10 cm s−1, the instrument would promote the very high, present interest in the astronomical community to detect and characterize exoplanets. The project successfully passed the conceptual design review (CoDR) in 2019. The instrument is composed of a near-UV band spectrograph (UVS) and a visible band spectrograph (VIS). They provide a spectral resolving power of R ≥100,000 in the visible band (420 nm – 780 nm), and R≥25,000 in the UV band (310 nm – 420 nm). The VIS subsystem will be enclosed in an ultra-stable environment in the Coudé room for the stellar precise radial velocity (PRV) measurements. T he UVS subsystem will be located near the Nasmyth focus to improve the total throughput at the wavelength shorter than 400 nm, to ensure various additional science cases ranging from stellar evolution to the measurement of fundamental constants. This paper gives an overview of the project background, science cases, and technical considerations during the conceptual design phase."
Imaging, feature extraction, and recognition of targets with micromotion by retrieving their three-dimensional micromotion trajectories (3-D MMTs) have attracted a lot of interest in recent years. We propose a method for retrieving the 3-D MMT of a rotating target based on the interferometric phases obtained using a wideband interferometric radar system with three antennas positioned in L-shape. First, the micro-Doppler effect of rotating target is theoretically analyzed with formulas derived. Then, the instantaneous frequencies are extracted via the short-time Fourier transform and the Viterbi algorithm. The echo signals received by these three antennas are decomposed by the intrinsic chirp component decomposition method, and the interferometric phases of different scatterers are respectively obtained. Finally, the 3-D MMTs of rotating target are reconstructed by exploring the interferometric phases and the range-slow-time data. The effectiveness of the proposed method is validated by both simulations and practical experiment using a Ka-band interferometric radar.
Solar cells operating in harsh conditions such as extraterrestrial environment suffer from ionizing UV irradiation from the sun and radiation damages from high-energy particles. Titania (TiO2) can achieve high transmittance in the visible and near-infrared while efficiently blocking UV irradiations. Cerium-doped yttrium aluminum garnet (YAG:Ce) is commercially used as an efficient spectral downconverter in white-light LEDs, and it has also been studied for its potential as a radiation-withstanding scintillator. We propose TiO2 / YAG : Ce thin films utilizing TiO2’s UV cut-off properties as well as YAG:Ce’s downshifting properties as both multipurpose protector and performance enhancer for solar cells.
We built a fiber link system to connect the astronomical laser frequency combs (astro-comb) and the HRS spectrograph for Chinese 2.16m telescope in Xinglong. Fiber noise deteriorates the precision and stability of high spectral resolution fiber-fed spectrograph, especially when the astro-comb is used as calibrators. In order to optimize the performance of the astro-comb fiber link system, it is essential to suppress the fiber noise. The polygonal fiber is used to improve the scrambling and a vibrator attached to fiber is used to eliminate the speckle. The experiment results show good suppression of fiber noise with polygonal fiber, especially for the octagonal fiber, together with dynamic agitation by a vibrator.
When a multimode fiber transmits a laser beam, the speckle will form in its output field. A dynamic fiber scrambler
could be used to suppress the speckle. No matter what actual way of suppressing speckle is, such as fiber scrambling or
using a rotating phase plate, the suppression is the result of exerting disturbance in the process of the speckle forming.
We could disturb the phase of the input beam with specific method to weaken the speckle effect. To get a speckle image
formed by a multimode fiber, we simulate different diffraction patterns under different phase conditions using diffraction
model, in which the phase of the input beam is modulated by a rough surface, and then sum them to form the
instantaneous speckle. To study the speckle suppression, we superpose instantaneous speckles, and as a consequence the
final speckle is suppressed. The simulation would help us understand the speckle suppression experiment with the input
beam phase modulation conducted in our lab.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.