Daniele Spiga graduated in Physics from the Milano University in 2000. In 2005 he was awarded with the Ph.D. in Astrophysics and Astronomy at the Milano-Bicocca University, after defending a technological thesis developed at INAF/OAB (Brera Astronomical Observatory), devoted to the development of multilayer-coated mirrors for future X-ray telescopes. His Ph.D. Thesis was awarded with the "P. Tacchini" prize in 2005. In 2007, he appointed a position as INAF/OAB researcher. From Feb 2018 until June 2019, he has been Staff Engineer in the Optics & Metrology Department at SLAC-LCLS (Stanford University, California) on high-power optics for Free Electron Lasers. His professional activity is focused on precision measurements of X-ray focusing mirrors and the related simulation of the effects of the nanometer defects on the imaging quality. In 2018, he has designed the project of an innovative calibration facility (named BEaTriX) for the optical elements of the space telescope ATHENA, which has been financed by the European Space Agency and recently completed at the Merate seat of the OAB. He is also engaged in astronomical outreach, doing public conferences in schools or in night sky observations held in OAB-Merate, and as a teacher and juror at the Italian Astronomy Olympiads, in which he coordinates the local department for Lombardy. In 2020, he appointed the role of Senior Research Engineer at OAB, where he was promoted to Research Engineering Manager in 2024. He has authored and co-authored more than 300 scientific publications, cited > 3000 times. Until now, 8 students have graduated or got their Ph.D. under his guidance. His amateur interests are the study of the Solar system dynamics and the planetary defense from asteroid impacts.
This will count as one of your downloads.
You will have access to both the presentation and article (if available).
All variants are found to produce an effective area at 1 keV of around 1.24 m2, well beyond the scientific requirement of 1.1 m2. All variants are shown, when assuming a perfectly shaped and aligned mirror that is perfectly smooth, to have an intrinsic PSF that is an order of magnitude below the scientific requirement. Comparing these intrinsic PSF’s, the secondary polynomial performs best at energies below 7.5 keV. Above this energy, the equal polynomial variant performs best. A phenomenon is also shown where shifting destructive interference causes periodic peaks and troughs in the PSF HEW of individual rings of the optics, though this effect is not seen in the PSF HEW of the entire optics.
We present in this paper the status of the optics production and illustrate not only recent X-ray results but also the progress made on the environmental testing, manufacturing and assembly aspects of SPO based optics.
The facility is compact (just 8 m x 14 m). Thanks to an innovative optical design based on an asymmetrical-cut crystal associated with a paraboloidal grazing incidence mirror, it can produce an expanded X-ray beam (170 mm x 60 mm) with low divergence (about 2 arcsec measured for the 4.51 keV beamline) at the two monochromatic energies of 4.51 keV and 1.49 keV. This allows us to calibrate each SPO MM's Effective Area and Point Spread Function precisely.
The first beamline, at 4.51 keV photon energy, is already operational, as the commissioning was completed in Q1-2023. The second beamline, at 1.49 keV energy, is being developed. It presents some more challenging aspects from both the design and implementation points of view. The monochromator stage is based on two Quartz (100); two ADP asymmetric-cut crystals (101) will provide the horizontal expansion of the beam. The X-ray source needs to be very brilliant (5 x 1011 - 1012 ph/s/sterad) due to the large fraction of photons rejected by the crystals.
This paper describes the ongoing activities. It will present the results of the 4.51 keV X-ray beamline optimization and the tests performed on a coated MM. It will also describe the progress in implementing the 1.49 keV components and discuss the comparison with other X-ray testing facilities.
The Silicon Pore Optics (SPO) enables the NewAthena mission, delivering an unprecedented combination of good angular resolution, large effective area and low mass. The SPO technology builds significantly on spin-in from the semiconductor industry and is designed to allow a cost-effective flight optics implementation, compliant with the programmatic requirements of the mission.
The NewAthena X-ray optics is highly modular, consisting of hundreds of compact mirror modules arranged in concentric circles and mounted on a metallic optical bench. All aspects of the optics are being developed in parallel, from the industrial production of the mirror plates, over the highly efficient assembly into mirror modules, to the alignment of the mirror modules and their fixation on the optical bench. Dedicated facilities are being built to measure the performance of the NewAthena X-ray telescope optics, demonstrating their compatibility with the environmental and scientific requirements.
An overview is provided of the activities preparing the implementation of the NewATHENA optics.
The next generation x-ray observatory ATHENA (advanced telescope for high energy astrophysics) requires an optics with unprecedented performance. It is the combination of low mass, large effective area and good angular resolution that is the challenge of the x-ray optics of such a mission. ATHENA is the second large class mission in the science programme of ESA, and is currently in a reformulation process, following a design-to-cost approach to meet the cost limit of an ESA L-class mission.
The silicon pore optics (SPO) is the mission enabler being specifically developed for ATHENA, in a joint effort by industry, research institutions and ESA. All aspects of the optics are being addressed, from the mirror plates and their coatings, over the mirror modules and their assembly into the ATHENA telescope, to the facilities required to build and test the flight optics, demonstrating performance, robustness, and programmatic compliance.
The SPO technology is currently being matured to the level required for the adoption of the ATHENA mission, i.e., the start of the mission implementation phase. The monocrystalline silicon material and pore structure of the SPO provide these optics with excellent thermal and mechanical properties. Benefiting from technology spin-in from the semiconductor industry, the equipment, processes, and materials used to produce the SPO are highly sophisticated and optimised.
The abbreviation “eXTP” represents the enhanced x-ray timing and polarimetry, which is a key science mission initiated by the Chinese scientists, designed to study the state of matter under extreme conditions of density, gravity and magnetism [1]. Various payloads would be on board of the satellite. The SFA, namely the spectroscopy focusing array, consisting of nine identical x-ray telescopes working in the energy range of 0.5-10 keV, will be the focus here [1]. SFA has a field-of-view of 12 arcmin for each and a collecting area of 900 cm2 and 550 cm2 for each at 2 keV and 6 keV respectively [1].
This paper starts with a brief introduction of the general optics, and then goes across some important design aspects. It covers contents from the structural and thermal designs to the CAE analyses as well as the current status. The large diameter and huge focal length of the optics will definitely bring big issues to the robustness of the carrying structure under the severe conditions given by the launcher.
According to the current design, the mirror assembly will have 3 feet and 24 spokes. Vibration tests were already performed on a few prototypes by IHEP, and a preliminary evaluation on the feasibility of the design has been achieved. It clearly stated that the current design with only a single spider can probably survive the vibration tests assuming a compromised test condition somewhere. CAE models were adjusted thereafter to match the test results, which could be used for further assessments in a near future.
Of course, there are always uncertainties associated with our arguments. More detailed prototypes with mechanically fully representative shells were still under design. Hopefully, highly reliable results could be retrieved soon.
ESA’s Athena mission will use silicon pore optics, in which the optics assembly consists of pairs of mirror plates stacked into mirror modules. This paper presents a study of the angular resolution of Athena, using several candidate variants of mirror curvature and wedging. Results were achieved by ray-tracing these variants of Athena’s optics with the ray-tracing software SPORT.
The study shows that all polynomial variants yield a PSF below 1” on-axis, at all energies between 0.1 and 12 keV. The secondary-only polynomial variants perform best, for both on- and off-axis point sources. Of these variants, the wedging 0/2 variant is shown to generally yield superior angular resolution at higher energies, the -1/1 variant at lower energies.
A ray-tracing analysis using the Crab Nebula as an observation target was also performed. A 2D Fourier analysis was applied to the resulting focal plane responses to determine their angular resolution. This analysis indicates the angular resolution of all polynomial variants to be below 1”, at all but the highest energies. It also shows, though to a lesser extent, that the secondary-only polynomial variants perform best in most circumstances. Nevertheless, this second analysis requires further investigation for a more conclusive outcome.
To overcome these limitations, we started in 2012 to design a facility aimed at generating a broad (170 x 60 mm2), uniform and low-divergent (1.5 arcsec HEW) X-ray beam within a small lab (∼ 9 x 18 m2), to characterize the ATHENA MM. BEaTriX (the Beam Expander Testing X-ray facility) makes use of an X-ray microfocus source, a paraboloidal mirror, a crystal monochromation system, and an asymmetrically-cut diffracting crystal for the beam expansion. These optical components, in addition to a modular low-vacuum level (10-3 mbar), enable to match the ATHENA SPO acceptance requirements.
The realization of this facility at INAF-OAB in Merate (Italy) is now on going. Once completed, BEaTriX can be used to test the Silicon Pore Optics modules of the ATHENA X-ray observatory, as well as other optics, like the ones of the Arcus mission. In this paper we report the advancement status of the facility.
Simulating the optical performances of the LCLS bendable mirrors using a 2D physical optics approach
Cold and Hot Slumped Glass Optics with interfacing ribs for high angular resolution x-ray telescopes
We present first results of demonstrating Silicon Pore Optics for the extreme radial positions of the Athena telescope. For the inner most radii (0.25 m) a new mirror plate design is shown which overcomes the challenges of larger curvatures, higher stress values and bigger plates. Preliminary designs for the mounting system and its mechanical properties are discussed for mirror modules covering all other radial positions up to the most outer radius of the Athena telescope.
Future high energy astrophysics missions will require high performance novel X-ray optics to explore the Universe beyond the limits of the currently operating Chandra and Newton observatories. Innovative optics technologies are therefore being developed and matured by the European Space Agency (ESA) in collaboration with research institutions and industry, enabling leading-edge future science missions.
Silicon Pore Optics (SPO) [1 to 21] and Slumped Glass Optics (SGO) [22 to 29] are lightweight high performance X-ray optics technologies being developed in Europe, driven by applications in observatory class high energy astrophysics missions, aiming at angular resolutions of 5” and providing effective areas of one or more square meters at a few keV.
This paper reports on the development activities led by ESA, and the status of the SPO and SGO technologies, including progress on high performance multilayer reflective coatings [30 to 35]. In addition, the progress with the X-ray test facilities and associated beam-lines is discussed [36].
This will count as one of your downloads.
You will have access to both the presentation and article (if available).
View contact details
No SPIE Account? Create one
