Femtosecond Infrared (fs-IR) laser written fiber Bragg gratings (FBGs), have shown great potential for sensing in extreme environments. This paper presents the fabrication and deployment of two fs-IR laser written FBG temperature probes, for monitoring temperature gradients on the flame tube of a low emission burner, during a high pressure combustor test of an optically accessible combustor rig (OACR).
Results of this work include: contour plots of measured internal and exhaust temperature gradients, contrast of FBG measurements with thermocouple data, discussion of deployment strategies, as well as comments on reliability and other important considerations.
This paper reports testing results of radiation resilient fiber Bragg grating (FBG) in radiation resistant fibers in the nuclear reactor core at MIT Research Reactor Lab. FBGs were fabricated by 140-fs ultrafast laser pulse using a phase mask approach. In-core test of fiber Bragg gratings was carried out in the core region of a 6-MW research reactor at temperature > 600°C and an average fast neutron (>1 MeV) flux >1×1014 n/s/cm2. First 100-day tests of FBG sensors shows less than 5 dB reduction in FBG peak strength after over 1×1020 n/cm2 of accumulated fast neutron dosage. To test temporal responses of FBG sensors, a number of reactor anomaly events were artificially created to abruptly change reactor power, temperature, and neutron flux over short periods of time. The thermal optical coefficients and temporal responses of FBG sensors are determined at different accumulated dosages of neutron flux. Results presented in this paper reveals that temperature-stable Type-II FBGs fabricated in radiation-hardened fibers could be used as sensors to perform in-pile measurements to improve safety and efficiency of existing and next generation nuclear reactors.
Plane-by-plane fabrication of fiber Bragg gratings in optical fibers using short-pulse femtosecond IR laser is proposed and demonstrated. By incorporating a cylindrical lens in the fabrication setup, a plane of index modification can be directly inscribed in fiber core by a single laser pulse through the proposed method. This plane-by-plane method simplifies the grating inscription process and allows for the fabrication of complicated grating structures.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.