The initial on-orbit checkout of the soft X-ray spectroscopic system on board the XRISM satellite is summarized. The satellite was launched on September 6, 2023 (UT) and has been undergoing initial checkout since then. Immediately after the launch, the cryocoolers were turned on and their operation was established. The first cycle of the adiabatic demagnetization refrigerator was performed on Oct. 9th, 2023, to transition the sensor to steady-state operational temperature conditions. Subsequently, the filter wheel, which supports energy calibration, was started up. The energy scale is highly sensitive to the temperature environment around the sensor and its analog electronics. The gain correction was established by referring to the calibration X-ray line. For an optimization of the cooler frequencies, we took data including the noise spectra by scanning the cooler frequencies, and selected a good frequency pair in the on-orbit environment. At the last stage of the checkout, the gate valve, which protects the inside of the Dewar from outside air pressure at launch, was attempted to be opened to bring the system to a state where it is ready for regular operations but was failed.
We present the design and performance of the XRISM Soft X-Ray Spectrometer Resolve, successfully launched on a JAXA H-IIA rocket September 7, 2023. The instrument uses a 36-pixel array of microcalorimeters at the focus of a grazing-incidence x-ray mirror. The instrument has achieved an energy resolution of 4.5 eV (FWHM) at 6. The overall cooling chain was designed to provide a lifetime of at least 3 years in orbit and operate without liquid helium to provide redundancy and the longest operational lifetime for the instrument. Early indications that the cryogen lifetime will exceed 4 years. X-rays are focused onto the array with a high-throughput grazing incidence X-ray Mirror Assembly with over 200 nested two-stage X-ray reflectors. A series of onboard X-ray calibrations sources allow simultaneous energy scale calibration lines simultaneously while observing celestial sources. The inflight performance of Resolve will be described along with a summary of the scientific capabilities.
KEYWORDS: Space operations, Data processing, Photovoltaics, Equipment, Calibration, Source mask optimization, Information technology, Data archive systems, Satellites, X-rays
The X-Ray Imaging and Spectroscopy Mission (XRISM) is an international X-ray observatory developed by Japan Aerospace Exploration Agency (JAXA) and National Aeronautics and Space Administration (NASA) in collaboration with European Space Agency (ESA), successfully launched in September 2023. Since the early stage of the project, the XRISM science operations team (SOT) was organized independently of the spacecraft bus system and mission instrument development teams, having prepared for the in-orbit science operations to maximize the scientific outputs. During about half year for the initial operation phase after launch, operations for the mission instruments were started, and the quick-look and the pipeline processes were carried out by SOT in order to check the functions of the instruments. After transition to the nominal operation phase, we started the target observations in the performance verification phase, whose short and long-term observation plans are considered by SOT, including planning the target of opportunity observations. The information on the observation modes of the mission instruments and the status of the data processing is maintained collectively in database synchronized between JAXA and NASA. We also performed the performance verification and optimization activities which provide the well-calibrated data, appropriate tools, and analysis methods for the users and established a help desk that supports the XRISM data analysis. The publicly solicited observation for the guest observer will be started from August or September 2024. These daily science operations are being carried out by dedicated scientists belonging to JAXA in collaboration with the other SOT members, the mission operations team and the instrument teams. This paper will introduce the ground system for the XRISM science operations and report on the activities of the SOT from the launch to today and plans for future science operations.
KEYWORDS: Global Positioning System, Clocks, Vacuum, Temperature metrology, Data conversion, Calibration, Satellites, Data modeling, Space operations, Physics
We report the results from the ground and on-orbit verification of the XRISM timing system when the satellite clock is not synchronized to the GPS time. XRISM carries a GPS receiver which synchronizes the main satellite clock to the GPS time but in a rare case that the satellite fails to receive the GPS signal, the clock runs freely and its frequency changes depending on its temperature. In this case, we correct the time drift considering the temperature dependency of the clock frequency measured in advance. To confirm that the accuracy of the time assignment in the GPS unsynchronized mode satisfies the requirement (within a 350 us error in the absolute time, for the satellite bus system plus ground system), we have performed the ground and on-orbit tests. In the thermal vacuum test performed in 2022, we obtained the GPS unsynchronized mode data and the temperature versus clock frequency trend. Comparing the time values assigned to the data and the true GPS times when the data were obtained, we confirmed that the requirement was satisfied in the temperature condition of the thermal vacuum test. We also simulated the variation of the timing accuracy in the on-orbit temperature conditions, using the Hitomi on-orbit temperature data and the dependency of the timing error on the temperature gradient obtained in the thermal vacuum test. We found that the error remained within the requirement over ∼ 300000 s without any time calibration data. After the launch, we performed on-orbit tests in 2023 September and October as part of the bus system checkout. The temperature versus clock frequency trend was found to remain unchanged from that obtained in the thermal vacuum test and the observed time drift was consistent with that expected from the trend.
The XRISM is the newly born X-ray satellite led by JAXA and NASA in collaboration with ESA, aiming to perform high-resolution spectroscopy of many astronomical X-ray objects. In the era of multi-messenger astronomy, where observations are performed in various wavelengths and include neutrino and gravitational data, it is important for the observatories to assign precise time of photons. To achieve the science goals of the XRISM mission, an absolute timing accuracy of 1.0 ms is required for the Resolve. The timing system, including both onboard instruments and off-line data-processing tools, is designed to meet this requirement. Following the lessons of the previous X-ray mission of Hitomi, comprehensive list of items that affect the accuracy of the timing are listed together with the timing error budget. During the system design and verification phases on the ground, all elements are controlled and verified to be within the budgets at the component level. After the launch of the satellite on 7 September 2023, in the initial commissioning phase, the overall timing performance of the timing system is scheduled to be confirmed to satisfy the timing requirements using a millisecond pulsar. The XRISM spacecraft carries the GPS receiver and the timing system uses the GPS signals in the nominal operation mode. In this presentation, we summarize the detailed design of the timing system of the XRISM, and the results of the timing verification tests both on ground and in orbit in the nominal operation mode. Detailed results on the failure mode of the GPS receiver will be presented in another presentation.
The Resolve instrument aboard the X-ray Imaging and Spectroscopy Mission (XRISM) is a 36-pixel microcalorimeter spectrometer that provides non-dispersive spectroscopy with 5 eV spectral resolution in the soft x-ray waveband. Resolve has a requirement to provide absolute energy-scale calibration of ± 2 eV from 0.3–12 keV. In this manuscript we describe our ground calibration strategy and results of a subset of the ground calibration campaigns, including a discussion of improvements in the energy scale ground calibration compared to Hitomi’s. These improvements include calibration of the low-energy band below 4 keV with the instrument in the flight dewar and the dewar aperture door open, which was not performed for Hitomi, and thorough measurements over an extended high-energy waveband to 22 keV. We also developed an improved technique for gain calibration of ‘mid-res’ secondary events, which have suppressed gain due to proximity to a preceding x-ray event (18-70 ms) on the same pixel. We provide an assessment of how well these pre-launch gain scales correct on-orbit data and discuss approaches for updating the gain curves. Energy-scale calibration approaches for future space-based instruments, including the X-ray Integral Field Unit (X-IFU) on Athena and the microcalorimeter spectrometer proposed for the Line Emission Mapper (LEM), have heritage in the calibration of XRISM. We briefly comment on lessons learned from Resolve calibration that are relevant for these future instruments.
The X-Ray Imaging and Spectroscopy Mission (XRISM) project at JAXA officially started in 2018. Following the development of onboard components, the proto-flight test was conducted from 2021 to 2023 at JAXA Tsukuba Space Center. The spacecraft was launched from JAXA Tanegashima Space Center on September 7, 2023 (JST), and onboard components, including the science instruments, were activated during the in-orbit commissioning phase. Following the previous report in 2020, we report the spacecraft ground tests, the launch operation, in-orbit operations, and the status and plan of initial and subsequent guest observations.
Resolve is the instrument that utilizes an X-ray micro-calorimeter array onboard the XRISM (X-Ray Imaging and Spectroscopy Mission), which was launched on September 6 (UT), 2023. It fully met the spectral performance requirement (7 eV at 6 keV) both on the ground and in orbit and was confirmed to have the same performance as the SXS onboard the ASTRO-H (Hitomi) satellite. The detectors are operated at a low temperature of 50 mK to achieve the required energy resolution with the cooling system to satisfy the lifetime requirement of over 3 years. The cooling system is equipped with a 3-stage ADR and superfluid liquid He (LHe) as the heat sink for the ADR. The Joule-Thomson cooler unit and 2-stage Stirling cooler units are adopted to reduce heat load to the LHe. In the pre-launch operations, we carried out the low-temperature LHe top-off operation. The resultant amount of liquid He was over 35 L at the launch, which is sufficient to meet the lifetime requirement. During the post-launch operation, the LHe vent valve was opened five minutes after launch during the rocket acceleration, and the cryocoolers started in several revolutions as planned which established stable cooling of the dewar.
The X-ray Imaging and Spectroscopy Mission (XRISM) is an X-ray astronomy satellite successfully launched in September 2023. The satellite carries two X-ray telescopes with a focal length of 5.6 meters. One of these is Resolve, which consists of an X-ray Mirror Assembly (XMA) and a microcalorimeter array, providing a relatively narrow field of view (FoV) of 3.05 arcminutes squared. The other is Xtend, which consists of an XMA and an X-ray CCD camera, offering a large FoV of 38 arcminutes squared. Due to Resolve’s limited FoV, pointing accuracy is crucial for stable observation. The observation aimpoint, defined as the position on the focal plane where an on-axis target is located, was verified within a few arcseconds of the center of the array after the satellite’s boresight correction. It was also confirmed to be suitable, with no significant irreversible shift detected over approximately half a year. In the commissioning phase, all measurable requirements for pointing accuracy were confirmed to be met. The absolute pointing determination accuracies are less than 20 arcseconds for both instruments. The aimpoint shift and its temperature dependence were also assessed for each detector. The aimpoint shifts of both instruments in each observation have a good correlation on the X-axis, but not on the Y-axis in the detector coordinates. Resolve’s Y-axis shift clearly depends on the base panel temperature, on the order of a few arcseconds, which can be ignored for the absolute control accuracy and effective area. The sharp PSF core with an FWHM of approximately 10 arcseconds and arcsecond-scale relative determination accuracy enable Xtend to achieve good image reconstruction performance.
The resolve instrument onboard the X-Ray Imaging and Spectroscopy Mission (XRISM) consists of an array of 6 × 6 silicon-thermistor microcalorimeters cooled down to 50 mK and a high-throughput x-ray mirror assembly (XMA) with a focal length of 5.6 m. XRISM is a recovery mission of ASTRO-H/Hitomi, and the Resolve instrument is a rebuild of the ASTRO-H soft x-ray spectrometer (SXS) and the Soft X-ray Telescope (SXT) that achieved energy resolution of ∼5 eV FWHM on orbit, with several important changes based on lessons learned from ASTRO-H. The flight models of the Dewar and the electronics boxes were fabricated and the instrument test and calibration were conducted in 2021. By tuning the cryocooler frequencies, energy resolution better than 4.9 eV FWHM at 6 keV was demonstrated for all 36 pixels and high resolution grade events, as well as energy-scale accuracy better than 2 eV up to 30 keV. The immunity of the detectors to microvibration, electrical conduction, and radiation was evaluated. The instrument was delivered to the spacecraft system in 2022-04 and is under the spacecraft system testing as of writing. The XMA was tested and calibrated separately. Its angular resolution is 1.27′ and the effective area of the mirror itself is 570 cm2 at 1 keV and 424 cm2 at 6 keV. We report the design and the major changes from the ASTRO-H SXS, the integration, and the results of the instrument test.
The X-Ray Imaging and Spectroscopy Mission (XRISM) is the successor to the 2016 Hitomi mission that ended prematurely. Like Hitomi, the primary science goals are to examine astrophysical problems with precise highresolution X-ray spectroscopy. XRISM promises to discover new horizons in X-ray astronomy. XRISM carries a 6 x 6 pixelized X-ray micro-calorimeter on the focal plane of an X-ray mirror assembly and a co-aligned X-ray CCD camera that covers the same energy band over a large field of view. XRISM utilizes Hitomi heritage, but all designs were reviewed. The attitude and orbit control system were improved in hardware and software. The number of star sensors were increased from two to three to improve coverage and robustness in onboard attitude determination and to obtain a wider field of view sun sensor. The fault detection, isolation, and reconfiguration (FDIR) system was carefully examined and reconfigured. Together with a planned increase of ground support stations, the survivability of the spacecraft is significantly improved.
The Resolve instrument onboard the X-ray Astronomy Recovery Mission (XARM) consists of
an array of 6x6 silicon-thermistor microcalorimeters cooled down to 50 mK
and a high-throughput X-ray mirror assembly with a focal length of 5.6 m.
The XARM is a recovery mission of ASTRO-H/Hitomi,
and is developed by international collaboration of Japan, USA, and Europe.
The Soft X-ray Spectrometer (SXS) onboard Hitomi demonstrated high resolution
X-ray spectroscopy of ~ 5 eV FWHM in orbit for most of the microcalorimeter pixels.
The Resolve instrument is planned to mostly be a copy of the Hitomi SXS and
Soft X-ray Telescope designs, though several changes are planned
based on the lessons learned of Hitomi.
The energy resolution budget of the microcalorimeters is updated,
reflecting the Hitomi SXS results.
We report the current status of the Resolve instrument.
The ASTRO-H mission was designed and developed through an international collaboration of JAXA, NASA, ESA, and the CSA. It was successfully launched on February 17, 2016, and then named Hitomi. During the in-orbit verification phase, the on-board observational instruments functioned as expected. The intricate coolant and refrigeration systems for soft X-ray spectrometer (SXS, a quantum micro-calorimeter) and soft X-ray imager (SXI, an X-ray CCD) also functioned as expected. However, on March 26, 2016, operations were prematurely terminated by a series of abnormal events and mishaps triggered by the attitude control system. These errors led to a fatal event: the loss of the solar panels on the Hitomi mission. The X-ray Astronomy Recovery Mission (or, XARM) is proposed to regain the key scientific advances anticipated by the international collaboration behind Hitomi. XARM will recover this science in the shortest time possible by focusing on one of the main science goals of Hitomi,“Resolving astrophysical problems by precise high-resolution X-ray spectroscopy”.1 This decision was reached after evaluating the performance of the instruments aboard Hitomi and the mission’s initial scientific results, and considering the landscape of planned international X-ray astrophysics missions in 2020’s and 2030’s. Hitomi opened the door to high-resolution spectroscopy in the X-ray universe. It revealed a number of discrepancies between new observational results and prior theoretical predictions. Yet, the resolution pioneered by Hitomi is also the key to answering these and other fundamental questions. The high spectral resolution realized by XARM will not offer mere refinements; rather, it will enable qualitative leaps in astrophysics and plasma physics. XARM has therefore been given a broad scientific charge: “Revealing material circulation and energy transfer in cosmic plasmas and elucidating evolution of cosmic structures and objects”. To fulfill this charge, four categories of science objectives that were defined for Hitomi will also be pursued by XARM; these include (1) Structure formation of the Universe and evolution of clusters of galaxies; (2) Circulation history of baryonic matters in the Universe; (3) Transport and circulation of energy in the Universe; (4) New science with unprecedented high resolution X-ray spectroscopy. In order to achieve these scientific objectives, XARM will carry a 6 × 6 pixelized X-ray micro-calorimeter on the focal plane of an X-ray mirror assembly, and an aligned X-ray CCD camera covering the same energy band and a wider field of view. This paper introduces the science objectives, mission concept, and observing plan of XARM.
The Astro-H (Hitomi) Soft X-ray Spectrometer (SXS) was a pioneering imaging x-ray spectrometer with 5 eV energy resolution at 6 keV. The instrument used a microcalorimeter array at the focus of a high-throughput soft x-ray telescope to enable high-resolution nondispersive spectroscopy in the soft x-ray waveband (0.3 to 12 keV). We present the suite of ground calibration measurements acquired from 2012 to 2015, including characterization of the detector system, anti-coincidence detector, optical blocking filters, and filter-wheel filters. The calibration of the 36-pixel silicon thermistor microcalorimeter array includes parameterizations of the energy gain scale and line-spread function for each event grade over a range of instrument operating conditions, as well as quantum efficiency measurements. The x-ray transmission of the set of five Al/polyimide thin-film optical blocking filters mounted inside the SXS dewar has been modeled based on measurements at synchrotron beamlines, including with high spectral resolution at the C, N, O, and Al K-edges. In addition, we present the x-ray transmission of the dewar gate valve and of the filters mounted on the SXS filter wheel (external to the dewar), including beryllium, polyimide, and neutral density filters.
The Hitomi (ASTRO-H) mission is the sixth Japanese x-ray astronomy satellite developed by a large international collaboration, including Japan, USA, Canada, and Europe. The mission aimed to provide the highest energy resolution ever achieved at E > 2 keV, using a microcalorimeter instrument, and to cover a wide energy range spanning four decades in energy from soft x-rays to gamma rays. After a successful launch on February 17, 2016, the spacecraft lost its function on March 26, 2016, but the commissioning phase for about a month provided valuable information on the onboard instruments and the spacecraft system, including astrophysical results obtained from first light observations. The paper describes the Hitomi (ASTRO-H) mission, its capabilities, the initial operation, and the instruments/spacecraft performances confirmed during the commissioning operations for about a month.
The soft x-ray spectrometer (SXS) was a cryogenic high-resolution x-ray spectrometer onboard the Hitomi (ASTRO-H) satellite that achieved energy resolution of 5 eV at 6 keV, by operating the detector array at 50 mK using an adiabatic demagnetization refrigerator (ADR). The cooling chain from room temperature to the ADR heat sink was composed of two-stage Stirling cryocoolers, a He4 Joule–Thomson cryocooler, and superfluid liquid helium and was installed in a dewar. It was designed to achieve a helium lifetime of more than 3 years with a minimum of 30 L. The satellite was launched on February 17, 2016, and the SXS worked perfectly in orbit, until March 26 when the satellite lost its function. It was demonstrated that the heat load on the helium tank was about 0.7 mW, which would have satisfied the lifetime requirement. This paper describes the design, results of ground performance tests, prelaunch operations, and initial operation and performance in orbit of the flight dewar and the cryocoolers.
We summarize all of the in-orbit operations of the soft x-ray spectrometer (SXS) onboard the ASTRO-H (Hitomi) satellite. The satellite was launched on February 17, 2016, and the communication with the satellite ceased on March 26, 2016. The SXS was still in the commissioning phase, in which the set-ups were progressively changed. This paper is intended to serve as a concise reference of the events in orbit in order to properly interpret the SXS data taken during its short lifetime and as a test case for planning the in-orbit operation for future microcalorimeter missions.
The Soft X-ray Spectrometer (SXS) onboard the Hitomi (ASTRO-H) satellite observed several celestial objects. All the observations with the SXS were performed through a beryllium (Be) window installed on the gate-valve of the SXS dewar. However, the Be window had not been well calibrated before launching. Therefore, we measured the transmission of a spare Be window, which is from the same lot as the flight material. The measurements were preformed in 3.8–30 keV range with BL01B1 at SPring-8, and in 2.5–12 keV range combined with BL11B and BL7C at KEK-PF. In this paper, we report mainly the results of the KEK-PF experiment. With the KEK-PF, we measured five places of the Be window. Their estimated thicknesses are consistent with each other within 1.3 μm. In the five transmission data, we confirmed absorption edges by Fe-K, Ni-K and Mn-K and six edge like features at 3460, 6057, 6915, 7590, 8790 and 9193 eV, which can be interpreted as Bragg diffraction by Be polycrystal. By combining the transmissions measured at KEK-PF and at SPring-8, we estimated Be thickness of 259.73±0.01 μm. The amounts of contaminated materials are roughly comparable with the provided values from the provider. We also performed scanning measurements of whole surface in the Be window. In the results, thickness of Be window was found to be uniform in ±1µm from the measurement with 4 keV X-rays.
During the Hitomi (Astro-H) commissioning observations the SXS dewar gate valve (GV) remained closed to protect the instrument from initial spacecraft outgassing. As a result, the optical path of the observations included the Be window installed on the GV. Both x-ray fluorescence (XRF) analysis and x-ray transmission measurements were performed in June 2016 on the flight-spare Be window which is the same lot as the flight material at SPring-8 in Japan. The beamline operating range is 3.8 - 30 keV. We used a beam spot size of 1 mm × 0.2 mm to measure two positions on the Be window, at the center of the window and at one position 6.5 mm off-center. We used simultaneous transmission measurements of standard materials for energy calibration. The transmission data clearly showed Fe and Ni K-edges, plus a marginal detection of the Mn K-edge. We found that our transmission data was best fit using the following component Be: 261.86±0.01μm, Cr: 3nm (fixed), Mn: 3.81±0.05nm, Fe: 10.83±0.05nm, Ni: 16.48±0.03nm, Cu: 5nm (fixed). The transmission is reduced 1% at the Fe K-edge. The amount of contaminated materials are comparable to the values of the value provided by the vender. The surface transmission is strained with σ = 0.11% of the unbiased standard deviation calculated variation in the residuals between the measured value and the model.
We report recent results of the performance measurement of our X-ray telescope with adaptive optics. The
telescope is designed to use the 13.5nm EUV with the Mo/Si multilayers, making a normal incident optics. The
primary mirror is 80mm in its diameter and the focal length of 2m. The deformable mirror is controlled by
measuring a wave-front of an optical laser. Effects of a difference between the light paths from the reference and
from an object are examined. The angular resolution is measured with optical light and we confirm almost
diffraction limited resolution as well as its appropriate function as adaptive optics.
KEYWORDS: X-rays, Sensors, Spectroscopy, Space operations, Lithium, Field effect transistors, Satellites, Calibration, Single crystal X-ray diffraction, Magnetic sensors
We present the overall design and performance of the Astro-H (Hitomi) Soft X-Ray Spectrometer (SXS). The instrument uses a 36-pixel array of x-ray microcalorimeters at the focus of a grazing-incidence x-ray mirror Soft X-Ray Telescope (SXT) for high-resolution spectroscopy of celestial x-ray sources. The instrument was designed to achieve an energy resolution better than 7 eV over the 0.3-12 keV energy range and operate for more than 3 years in orbit. The actual energy resolution of the instrument is 4-5 eV as demonstrated during extensive ground testing prior to launch and in orbit. The measured mass flow rate of the liquid helium cryogen and initial fill level at launch predict a lifetime of more than 4 years assuming steady mechanical cooler performance. Cryogen-free operation was successfully demonstrated prior to launch. The successful operation of the SXS in orbit, including the first observations of the velocity structure of the Perseus cluster of galaxies, demonstrates the viability and power of this technology as a tool for astrophysics.
The Hitomi (ASTRO-H) mission is the sixth Japanese X-ray astronomy satellite developed by a large international collaboration, including Japan, USA, Canada, and Europe. The mission aimed to provide the highest energy resolution ever achieved at E > 2 keV, using a microcalorimeter instrument, and to cover a wide energy range spanning four decades in energy from soft X-rays to gamma-rays. After a successful launch on 2016 February 17, the spacecraft lost its function on 2016 March 26, but the commissioning phase for about a month provided valuable information on the on-board instruments and the spacecraft system, including astrophysical results obtained from first light observations. The paper describes the Hitomi (ASTRO-H) mission, its capabilities, the initial operation, and the instruments/spacecraft performances confirmed during the commissioning operations for about a month.
The Soft X-ray Spectrometer (SXS) is a cryogenic high-resolution X-ray spectrometer onboard the ASTRO-H satellite, that achieves energy resolution better than 7 eV at 6 keV, by operating the detector array at 50 mK using an adiabatic demagnetization refrigerator. The cooling chain from room temperature to the ADR heat sink is composed of 2-stage Stirling cryocoolers, a 4He Joule-Thomson cryocooler, and super uid liquid He, and is installed in a dewar. It is designed to achieve a helium lifetime of more than 3 years with a minimum of 30 liters. The satellite was launched on 2016 February 17, and the SXS worked perfectly in orbit, until March 26 when the satellite lost its function. It was demonstrated that the heat load on the He tank was about 0.7 mW, which would have satisfied the lifetime requirement. This paper describes the design, results of ground performance tests, prelaunch operations, and initial operation and performance in orbit of the flight dewar and cryocoolers.
We summarize all the in-orbit operations of the Soft X-ray Spectrometer (SXS) onboard the ASTRO-H (Hit- omi) satellite. The satellite was launched on 2016/02/17 and the communication with the satellite ceased on 2016/03/26. The SXS was still in the commissioning phase, in which the setups were progressively changed. This article is intended to serve as a reference of the events in the orbit to properly interpret the SXS data taken during its short life time, and as a test case for planning the in-orbit operation for future micro-calorimeter missions.
We report our recent activities for a development of a new X-ray interferometer with a beam splitter and discuss a possible observation of some celestial objects. The X-ray interferometer consists of two flat mirrors and one flat beam splitter. Samples of the beam splitter and the mirrors have been designed and fabricated. We measured the reflectivity of the mirrors and the reflectivity and transmission of the beam splitters with a synchrotron source at KEK-PF. Obtained results of the mirrors are roughly consistent with the design values, but the reflectivity of the beam splitter is roughly half of the design value. Using these measured values, we estimated required area and observation-time to obtain fringe signals of celestial objects. We concluded that a broad-band interferometer using non-dispersive high spectral resolution detector, such as the micro-calorimeter array, is essential for the future development.
The joint JAXA/NASA ASTRO-H mission is the sixth in a series of highly successful X-ray missions developed by the Institute of Space and Astronautical Science (ISAS), with a planned launch in 2015. The ASTRO-H mission is equipped with a suite of sensitive instruments with the highest energy resolution ever achieved at E > 3 keV and a wide energy range spanning four decades in energy from soft X-rays to gamma-rays. The simultaneous broad band pass, coupled with the high spectral resolution of ΔE ≤ 7 eV of the micro-calorimeter, will enable a wide variety of important science themes to be pursued. ASTRO-H is expected to provide breakthrough results in scientific areas as diverse as the large-scale structure of the Universe and its evolution, the behavior of matter in the gravitational strong field regime, the physical conditions in sites of cosmic-ray acceleration, and the distribution of dark matter in galaxy clusters at different redshifts.
We present the development status of the Soft X-ray Spectrometer (SXS) onboard the ASTRO-H mission. The SXS provides the capability of high energy-resolution X-ray spectroscopy of a FWHM energy resolution of < 7eV in the energy range of 0.3 – 10 keV. It utilizes an X-ray micorcalorimeter array operated at 50 mK. The SXS microcalorimeter subsystem is being developed in an EM-FM approach. The EM SXS cryostat was developed and fully tested and, although the design was generally confirmed, several anomalies and problems were found. Among them is the interference of the detector with the micro-vibrations from the mechanical coolers, which is the most difficult one to solve. We have pursued three different countermeasures and two of them seem to be effective. So far we have obtained energy resolutions satisfying the requirement with the FM cryostat.
The joint JAXA/NASA ASTRO-H mission is the sixth in a series of highly successful X-ray missions initiated
by the Institute of Space and Astronautical Science (ISAS). ASTRO-H will investigate the physics of the highenergy
universe via a suite of four instruments, covering a very wide energy range, from 0.3 keV to 600 keV.
These instruments include a high-resolution, high-throughput spectrometer sensitive over 0.3–12 keV with
high spectral resolution of ΔE ≦ 7 eV, enabled by a micro-calorimeter array located in the focal plane of
thin-foil X-ray optics; hard X-ray imaging spectrometers covering 5–80 keV, located in the focal plane of
multilayer-coated, focusing hard X-ray mirrors; a wide-field imaging spectrometer sensitive over 0.4–12 keV,
with an X-ray CCD camera in the focal plane of a soft X-ray telescope; and a non-focusing Compton-camera
type soft gamma-ray detector, sensitive in the 40–600 keV band. The simultaneous broad bandpass, coupled
with high spectral resolution, will enable the pursuit of a wide variety of important science themes.
The Soft X-ray Spectrometer (SXS) is a cryogenic high resolution X-ray spectrometer onboard the X-ray astronomy
satellite ASTRO-H. The detector array is cooled down to 50 mK using a 3-stage adiabatic demagnetization
refrigerator (ADR). The cooling chain from room temperature to the ADR heat-sink is composed of superfluid
liquid He, a 4He Joule-Thomson cryocooler, and 2-stage Stirling cryocoolers. It is designed to keep 30 L of liquid
He for more than 3 years in the nominal case. It is also designed with redundant subsystems throughout from
room temperature to the ADR heat-sink, to alleviate failure of a single cryocooler or loss of liquid He.
We present the science and an overview of the Soft X-ray Spectrometer onboard the ASTRO-H mission with
emphasis on the detector system. The SXS consists of X-ray focusing mirrors and a microcalorimeter array and
is developed by international collaboration lead by JAXA and NASA with European participation. The detector
is a 6×6 format microcalorimeter array operated at a cryogenic temperature of 50 mK and covers a 3' ×3' field
of view of the X-ray telescope of 5.6 m focal length. We expect an energy resolution better than 7 eV (FWHM,
requirement) with a goal of 4 eV. The effective area of the instrument will be 225 cm2 at 7 keV; by a factor of
about two larger than that of the X-ray microcalorimeter on board Suzaku. One of the main scientific objectives
of the SXS is to investigate turbulent and/or macroscopic motions of hot gas in clusters of galaxies.
We present the current status of a small X-ray mission DIOS (Diffuse Intergalactic Oxygen Surveyor), consisting
of a 4-stage X-ray telescope and an array of TES microcalorimeters, cooled with mechanical coolers, with a total
weight of about 400 kg. The mission will perform survey observations of warm-hot intergalactic medium using
OVII and OVIII emission lines, with the energy coverage up to 1.5 keV. The wide field of view of about 50'
diameter, superior energy resolution close to 2 eV FWHM, and very low background will together enable us a
wide range of science for diffuse X-ray sources. We briefly describe the current status of the development of the
satellite, and the subsystems.
The first light of a ultra-lightweight and low-cost micro-pore X-ray optic utilizing MEMS (Micro Electro Mechanical
Systems) technologies is reported. Our idea is to use silicon (111) planes appeared after anisotropic wet
etching of silicon wafers. As a first step to Wolter type-1 optics, a single-stage optic with a focal length of 750
mm and a diameter of 100 mm was designed for energies below 2 keV. The optic consists of 218 mirror chips
for X-ray reflection and an optic mount for packing these chips. Design parameters and required fabrication
accuracies were determined with numerical simulations. The fabricated optic satisfied these accuracies and its
imaging quality was measured at the ISAS X-ray beam line at Al Kα 1.49 keV. A focused image was successfully
obtained. The measured image size of ~4 mm was consistent with the chip sizes. The estimated X-ray reflectivity
also could be explained by micro-roughness of less than 3 nm and geometrical occulting effect due to large
obstacle structures on the reflection surface.
Recent development of the extremely light-weight micro pore optics based on the semiconductor MEMS (Micro Electro Mechanical System) technologies is reported. Anisotropic chemical wet etching of silicon (110) wafers were utilized, in order to obtain a row of smooth (111) side walls vertical to the wafer face and to use them as X-ray mirrors. To obtain high performance mirrors with smooth surfaces and a high aspect ratio, several modifications were made to our previous manufacturing process shown in Ezoe et al. (2005). After these improvements, smooth surfaces with rms roughness of the order of angstroms and also a high aspect ratio of 20 were achieved. Furthermore, a single-stage optic was designed as a first step to multi-stage optics. A mounting device and a slit device for the sample optic were fabricated fully using the MEMS technologies and evaluated.
Development of a new light-weight and low-cost micro pore optics is reported. Utilizing anisotropic chemical wet etching of MEMS (Micro Electro Mechanical System) technology, a number of smooth sidewalls are obtained at once. These sidewalls are potential X-ray mirrors. As a first step of R&D, basic characters of sidewalls such as surface roughness and X-ray reflectivity are experimentally studied. Rms-roughness of 10 ~ 20Å is confirmed in a KOH-etched wafer. Furthermore, the X-ray reflection is for the first time detected at Mg Kα 1.25 keV. Based on the obtained results, numerical simulations of four-stage MEMS X-ray optics are performed for future satellite mission.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.