29 November 2018 Polymer optical fiber specklegram strain sensor with extended dynamic range
Eric Fujiwara, Luiz Evaristo da Silva, Thiago H. R. Marques, Cristiano M.B. Cordeiro
Author Affiliations +
Abstract
A polymer optical fiber strain sensor with extended dynamic range is reported. The proposed algorithm resets the reference fiber status depending on the magnitude of the specklegram deviation so the correlation coefficient never saturates, yielding a continuous response over the full range for both positive and negative strains. The technique was evaluated on the measurement of axial strains using a ZEONEX core, poly(methyl methacrylate) cladding multimode fiber, presenting reproducible results with 3  ×  10  −  3  μϵ  −  1 sensitivity (∼15  μϵ resolution) within a 22,600  μϵ interval. In contrast to the available approaches, the presented method can retrieve the strain direction and does not require intensive image processing, thus providing a simple and reliable technique for mechanical measurements using multimode optical fibers.
© 2018 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2018/$25.00 © 2018 SPIE
Eric Fujiwara, Luiz Evaristo da Silva, Thiago H. R. Marques, and Cristiano M.B. Cordeiro "Polymer optical fiber specklegram strain sensor with extended dynamic range," Optical Engineering 57(11), 116107 (29 November 2018). https://doi.org/10.1117/1.OE.57.11.116107
Received: 28 August 2018; Accepted: 14 November 2018; Published: 29 November 2018
Lens.org Logo
CITATIONS
Cited by 34 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Polymer optical fibers

Speckle

Phase only filters

Cladding

Image processing

Optical engineering

Back to Top