30 July 2015 Improving the nonlinear proportional-derivative control for an MEMS torsional mirror with parametric uncertainties
Cheng Bai, Jin Huang
Author Affiliations +
Abstract
Fast settling, accurate positioning, and a large tilt angle range are important for MEMS mirrors. Here, residual vibration and the pull-in phenomenon—both major problems affecting the performance of an electrostatically actuated mirror—are investigated. Based on the analysis of a nonlinear proportional-derivative (PD) control with parametric uncertainties, a closed-loop feedback control strategy with a combined control scheme is proposed. This method, combining nonlinear PD control and sliding mode control (SMC), not only inherits the virtue of a good dynamic performance from the nonlinear PD control, but also further improves the robustness with SMC for such MEMS mirrors. Furthermore, this method can be convenient when tuning design gains of the controller to obtain a faster error convergence rate. Numerical simulation results show that with this combined control scheme not only the transient response of the MEMS mirror is improved but the influence of parametric uncertainties and external disturbance is also reduced.
© 2015 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286 /2015/$25.00 © 2015 SPIE
Cheng Bai and Jin Huang "Improving the nonlinear proportional-derivative control for an MEMS torsional mirror with parametric uncertainties," Optical Engineering 54(7), 077103 (30 July 2015). https://doi.org/10.1117/1.OE.54.7.077103
Published: 30 July 2015
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Nonlinear control

Micromirrors

Control systems

Mirrors

Microelectromechanical systems

Complex systems

Control systems design

Back to Top