5 June 2012 Interferometer and analysis methods for the in vitro characterization of dynamic fluid layers on contact lenses
Author Affiliations +
Abstract
The anterior refracting surface of the eye when wearing a contact lens is the thin fluid layer that forms on the surface of the contact lens. Under normal conditions, this fluid layer is less than 10 μm thick. The fluid layer thickness and topography change over time and are affected by the material properties of the contact lens and may affect vision quality and comfort. An in vitro method of characterizing dynamic fluid layers applied to contact lenses mounted on mechanical substrates has been developed by use of a phase-shifting Twyman-Green interferometer. This interferometer continuously measures light reflected from the surface of the fluid layer, allowing precision analysis of the dynamic fluid layer. Movies showing this fluid layer behavior can be generated. Quantitative analysis beyond typical contact angle or visual inspection methods is provided. Different fluid and contact lens material combinations have been evaluated, and variations in fluid layer properties have been observed. This paper discusses the interferometer design and analysis methods used. Example measurement results of different contact lens are presented.
© 2012 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2012/$25.00 © 2012 SPIE
Brian C. Primeau and John E. Greivenkamp "Interferometer and analysis methods for the in vitro characterization of dynamic fluid layers on contact lenses," Optical Engineering 51(6), 063601 (5 June 2012). https://doi.org/10.1117/1.OE.51.6.063601
Published: 5 June 2012
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Interferometers

Contact lenses

Fluid dynamics

Silicon

Eye

In vitro testing

Optical engineering

Back to Top