19 April 2012 Faceted grating prism for a computed tomographic imaging spectrometer
Author Affiliations +
Abstract
A computed tomographic imaging spectrometer (CTIS) disperses the three-dimensional (3-D) datacube (x, y, λ) into two-dimensional (2-D) projections on a focal plane array (FPA). The 3-D datacube is subsequently reconstructed from these 2-D projections using iterative computed tomography algorithms. Conventional designs achieve the 3-D to 2-D mapping by incorporating an optimized disperser. However, these dispersers suffer from the linearity constraint inherent in the first-order grating equation. This constraint means that many of the FPA's pixels are either unilluminated or they are used to image redundant projections; in both cases, they can not be used to increase the datacube's spectral resolution. Here, we outline various hardware improvements that increase the CTIS's spectral resolution by making use of these previously unilluminated or redundant pixels. Specifically, we incorporated a new disperser based on a 2-D grating prism and a division of aperture approach. Included is an optical design analysis of the system, in addition to an experimental characterization of the instrument's performance. Lastly, the new disperser is compared to a conventional disperser to quantify the increased spectral resolution.
© 2012 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2012/$25.00 © 2012 SPIE
Michael W. Kudenov, Julia M. Craven-Jones, Corrie J. Vandervlugt, Eustace L. Dereniak, and Riley W. Aumiller "Faceted grating prism for a computed tomographic imaging spectrometer," Optical Engineering 51(4), 044002 (19 April 2012). https://doi.org/10.1117/1.OE.51.4.044002
Published: 19 April 2012
Lens.org Logo
CITATIONS
Cited by 12 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Prisms

Staring arrays

Diffraction gratings

Spectroscopy

Calibration

Point spread functions

Modulation transfer functions

RELATED CONTENT

INSCAN PRO: a fast ultraviolet spectrometer design approach
Proceedings of SPIE (November 18 2013)
Grism development for EMIR
Proceedings of SPIE (January 30 2003)
Visible snapshot imaging spectro-polarimeter
Proceedings of SPIE (August 18 2005)

Back to Top