1 October 2007 Metallic surface roughness mapping using a PC-interfaced optoelectronic sensor system
Kabilan Ponnusamy Arunachalam, Paulvanna Nayaki Marimuthu
Author Affiliations +
Abstract
We present the measurement and graphical representation of spatial differential values of the surface roughness factor for various steel samples. The measurements were made by a newly developed optoelectronic sensor system comprising a light emitting diode (LED) and two phototransistors. The light beam from the LED illuminated an area of 1 mm2 on the metallic surface. The reflected light and scattered light were captured by two different photo detectors. The sample surface was scanned using a computer numerical control (CNC) machine. The photocurrent signals acquired at each point on the surface were digitized, and a parameter was calculated to correspond to the degree of roughness of the surface at the given point. The measured roughness factor is compared with the readings of a standard instrument, and the instrument was calibrated to display the measurements in micrometers. The measured values processed by a personal computer provided a three-dimensional (3-D) mapping of the surface texture.
©(2007) Society of Photo-Optical Instrumentation Engineers (SPIE)
Kabilan Ponnusamy Arunachalam and Paulvanna Nayaki Marimuthu "Metallic surface roughness mapping using a PC-interfaced optoelectronic sensor system," Optical Engineering 46(10), 103602 (1 October 2007). https://doi.org/10.1117/1.2799078
Published: 1 October 2007
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Surface roughness

Sensors

Light scattering

Light emitting diodes

Optoelectronics

Surface finishing

Calibration

RELATED CONTENT

Surface Finish From Reflected Laser Light
Proceedings of SPIE (December 15 1978)
Optical Surface Evaluation By Soft X-Ray Scattering
Proceedings of SPIE (August 12 1986)
Automated Measurement Of Surface Texture
Proceedings of SPIE (May 18 1987)
Texture Standards For Defence Optics
Proceedings of SPIE (April 01 1990)

Back to Top