1 June 1972 Multichannel Television Coupling Modulation Experiments Using a CO2 Laser
D. R. Hall, C. J. Peruso, E. H. Johnson, G. Schiffner, J. H. McElroy, N. McAvoy
Author Affiliations +
Abstract
Experiments are described in which a carbon dioxide laser oscillating at 28.4 THz has been modulated simultaneously by three commercial television signals with carriers at 54, 66, and 82 MHz. Signal-to-noise degradation in the system was measured to be less than 1 dB, corresponding to modulator drive power of 1 W. This combination of wide bandwidth and low power consumption was made possible by the application of coupling modulation. This technique employs an intracavity electrooptic crystal to which the modulating fields are applied. Despite the fact that the crystal is positioned inside the laser cavity, the maximum bandwidth attainable is independent of both the cavity Q and the laser transition linewidth, and is limited only by modulator characteristics and optical transit time. Rigrod's method has been adapted to obtain an expression for the power coupled out of the laser. Modulator frequency response and drive power requirements are also summarized. It is seen that the noise bandwidth performance of the system would allow simultaneous modulation by 17 color television channels, or equivalently, more than a 300-megabit/s capacity.
D. R. Hall, C. J. Peruso, E. H. Johnson, G. Schiffner, J. H. McElroy, and N. McAvoy "Multichannel Television Coupling Modulation Experiments Using a CO2 Laser," Optical Engineering 11(3), 110377 (1 June 1972). https://doi.org/10.1117/12.7971598
Published: 1 June 1972
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation

Televisions

Carbon dioxide lasers

Modulators

Crystals

Electro optics

Laser crystals

Back to Top