2 May 2016 Fabrication of hybrid ultraviolet photodetector using organic polymer thin-film-coated TiO2 nanowires
Saptadip Saha, Priyanath Das, Ajoy Kumar Chakraborty, Sharmistha Sarkar, Ruchira Debbarma
Author Affiliations +
Abstract
Poly (methyl methacrylate) (PMMA) thin film (TF) was employed on TiO2 nanowires (NWs) to fabricate organic–inorganic hybrid UV photodetector (PD), and its properties were studied and compared with bare TiO2 NW-based PD. A maximum photoresponsivity of 20×10−3  A/W and a maximum external quantum efficiency of ∼3.15% were observed in the UV region at 370 nm (∼3.35  eV). Enhanced photon absorption was observed in the hybrid detector. The TF of PMMA, which is a π-conjugated polymer, increased the carrier lifetime and reduced recombination rate. The PMMA TF:TiO2 NWs hybrid UV detector shows excellent rectification, and light current/dark current ratio was measured to be ∼1.46 times in comparison to bare TiO2 NWs photodetector in the reverse bias condition from −1 to −10  V.
© 2016 Society of Photo-Optical Instrumentation Engineers (SPIE) 1934-2608/2016/$25.00 © 2016 SPIE
Saptadip Saha, Priyanath Das, Ajoy Kumar Chakraborty, Sharmistha Sarkar, and Ruchira Debbarma "Fabrication of hybrid ultraviolet photodetector using organic polymer thin-film-coated TiO2 nanowires," Journal of Nanophotonics 10(2), 026011 (2 May 2016). https://doi.org/10.1117/1.JNP.10.026011
Published: 2 May 2016
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polymethylmethacrylate

Ultraviolet radiation

Photodetectors

Polymers

Absorption

Sensors

Nanowires

Back to Top