Nanofabrication with step and flash imprint lithography

Michael D. Stewart; Stephen C. Johnson; Sidlgata V. Sreenivasan; Douglas J. Resnick; Carlton Grant Willson

doi:10.1117/1.1862650

1 January 2005 Nanofabrication with step and flash imprint lithography

Michael D. Stewart, Stephen C. Johnson, Sidlgata V. Sreenivasan, Douglas J. Resnick, Carlton Grant Willson

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 4, Issue 1, 011002 (January 2005). https://doi.org/10.1117/1.1862650

Abstract

Step and flash imprint lithography (SFIL) has made tremendous progress since its initial development at The University of Texas at Austin in the late 1990s. The SFIL process went from laboratory to commercialization in under five years, and the number of technical hurdles that must be cleared before it is recognized as fully competitive with optical or EUV lithography for sub-50-nm patterning is dwindling. Patterning resolution has been demonstrated down to 20 nm, with the limit so far being only the template fabrication process. The SFIL method was developed from the beginning with the precision overlay/alignment requirements of multilevel device fabrication in mind. It was recognized that it would be inherently easier to achieve overlay and alignment accuracy with a constant temperature and low pressure imprinting process, and already tool designers have built on SFIL's advantages to produce tools that are viable for multilayer device fabrication. Early tools have demonstrated better than 10-nm alignment resolution, and no insurmountable fundamental issues have been identified that would prevent alignment resolution from reaching the tight tolerances required for integrated circuit manufacturing. With any contact printing method, process-generated defects are a concern, but the SFIL process has proven to be surprisingly robust with an inherent self-cleaning mechanism for removing particle contamination. Furthermore, new template surface treatments have been developed that improve mold lifetime and minimize defect generation. SFIL shows promise as a low cost manufacturing tool for a wide variety of semiconductor, microelectromechanical, optoelectronic, microfluidic, and other devices. This work summarizes the state of development of step and flash imprint lithography and discusses its potential as a general nanofabrication tool.

©(2005) Society of Photo-Optical Instrumentation Engineers (SPIE)

Citation Download Citation

Michael D. Stewart, Stephen C. Johnson, Sidlgata V. Sreenivasan, Douglas J. Resnick, and Carlton Grant Willson "Nanofabrication with step and flash imprint lithography," Journal of Micro/Nanolithography, MEMS, and MOEMS 4(1), 011002 (1 January 2005). https://doi.org/10.1117/1.1862650

Published: 1 January 2005

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available