14 October 2016 Development and characterization of resonator- and delay lines-based sensors on AlN/sapphire substrate for high-temperature application
Jie Liu, Bin Yang, Jingquan Liu, Xiang Chen, Xiaolin Wang, Chunsheng Yang
Author Affiliations +
Abstract
The performance of an AlN/sapphire temperature sensor operated at high temperature is investigated. To optimize the output performance, several different structural surface acoustic wave devices are fabricated, including one-port resonator and delay lines with various gaps. The effects of the electromechanical coupling coefficient (K2), insertion loss, and temperature coefficient of frequency on temperatures are demonstrated in detail. K2 increases with the increasing of the temperature and the insertion loss increases at the beginning, but decreases at higher temperatures due to the influence of the rising K2. The frequency responses of both the resonator and delay lines show very good linearity with temperature and both of them exhibit excellent stability.
© 2016 Society of Photo-Optical Instrumentation Engineers (SPIE) 1932-5150/2016/$25.00 © 2016 SPIE
Jie Liu, Bin Yang, Jingquan Liu, Xiang Chen, Xiaolin Wang, and Chunsheng Yang "Development and characterization of resonator- and delay lines-based sensors on AlN/sapphire substrate for high-temperature application," Journal of Micro/Nanolithography, MEMS, and MOEMS 15(4), 045002 (14 October 2016). https://doi.org/10.1117/1.JMM.15.4.045002
Published: 14 October 2016
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Resonators

Sensors

Acoustics

Aluminum nitride

Photoresist materials

Temperature metrology

Temperature sensors

Back to Top