A longer operating time and steeper learning curve in mastering the techniques for transurethral laser resection of the prostate are the main problems faced by surgeons in addition to the existing ones in standard transurethral resection of the prostate (TURP). However, these disadvantages can be alleviated with the introduction of a treatment procedure designed and developed based on an integrated system of computer, robotics and laser technology. In vitro experiments were carried out to determine variables affecting the vaporization and coagulation lesions, in order to study the effectiveness and feasibility of robotics for this procedure. Human cadaveric prostates and fresh tauted chicken breast tissues were irradiated with different parameters using the LaserTrode lightguide in contact with the tissue. The effects of irrigant flow rate, fiber/tissue angle of inclination, number of passes, direction, speed and power of lase on the volume of tissue vaporized and coagulated, were assessed. The final phase of the experiments includes executing the robotic motion plan for the laser resection procedure on the human cadaveric prostate tissue embedded in an anatomically alike prostate phantom. It was concluded from our study that power and speed of lase are the most significant parameters influencing the volume of the vaporized and coagulated lesion. Comparison of removal rate using the new treatment procedure of robotic laser resection of the prostate with TURP and HoLRP evinced equivalent results.
|