Significance
Ultrasonic transducers facilitate noninvasive biomedical imaging and therapeutic applications. Optoacoustic generation using nanoplasmonic structures provides a technical solution for highly efficient broadband ultrasonic transducer. However, bulky and high-cost nanosecond lasers as conventional excitation sources hinder a compact configuration of transducer.
Aim
Here, we report a plasmon-enhanced optoacoustic transducer (PEAT) for broadband ultrasound generation, featuring an overdriven pulsed laser diode (LD) and an Ecoflex thin film. The PEAT module consists of an LD, a collimating lens, a focusing lens, and an Ecoflex-coated 3D nanoplasmonic substrate (NPS).
Approach
The LD is overdriven above its nominal current and precisely modulated to achieve nanosecond pulsed beam with high optical peak power. The focused laser beam is injected on the NPS with high-density electromagnetic hotspots, which allows for the efficient plasmonic photothermal effect. The thermal expansion of Ecoflex finally generates broadband ultrasound.
Results
The overdriven pulsed LD achieves a maximum optical peak power of 40 W, exceeding the average optical power of 3 W. The 22 μm thick Ecoflex-coated NPS exhibits an eightfold optoacoustic enhancement with a fractional −6 dB bandwidth higher than 160% and a peak frequency of 2.5 MHz. In addition, the optoacoustic amplitude is precisely controlled by the optical peak power or the laser pulse width. The PEAT-integrated microfluidic chip clearly demonstrates acoustic atomization by generating aerosol droplets at the air–liquid interface.
Conclusions
Plasmon-enhanced optoacoustic generation using PEAT can provide an approach for compact and on-demand biomedical applications, such as ultrasound imaging and lab-on-a-chip technologies.
